journal article·2017-07

Carbon Redistribution and Carbide Precipitation in a High-Strength Low-Carbon HSLA-115 Steel Studied on a Nanoscale by Atom Probe Tomography

Divya Jain, Dieter Isheim, David N. Seidman

Publisher page

Abstract

HSLA-115 is a newly developed Cu-bearing high-strength low-carbon martensitic steel for use in Naval structural applications. This research provides, for the first time, a comprehensive compositional analysis of carbon redistribution and associated complex phase transformations in an isothermal aging study of HSLA-115 at 823 K (550 °C). Specifically, we characterize carbon segregation at lath boundaries, grain-refining niobium carbonitrides, cementite, and secondary hardening M2C carbides, in addition to copper precipitation, by 3D atom probe tomography (APT). Segregation of carbon (3 to 6 at. pct C) is observed at martensitic lath boundaries in the as-quenched and 0.12-hour aged microstructures. On further aging, carbon redistributes itself forming cementite and M2C carbides. Niobium carbonitride precipitates do not dissolve during the austenitizing treatment and are inherited in the as-quenched and aged microstructures; these are characterized along with cementite by synchrotron X-ray diffraction and APT. Sub-nanometer-sized M2C carbide precipitates are observed after the formation of Cu precipitates, co-located with the latter, indicating heterogeneous nucleation of M2C. The temporal evolution of the composition and morphology of M2C carbides at 823 K (550 °C) is described using APT; their precipitation kinetics is intertwined with Cu precipitates, affecting the bulk mechanical properties of HSLA-115. Phase compositions determined by APT are compared with computed compositions at thermodynamic equilibrium using ThermoCalc.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. A.D. Wilson, E.G. Hamburg, D.J. Colvin, S.W. Thompson, and G. Krauss: Microalloyed HSLA Steels, ASM International, Metals Park, OH, 1988, pp 259-75.
2. E.J. Czyryca, R.E. Link, R.J. Wong, D.A. Aylor, T.W. Montemarano, and J.P. Gudas: Nav. Eng. J., 1990, vol. 102, pp. 63-82.10.1111/j.1559-3584.1990.tb02632.x ↗
3. L.G. Kvidahl: Weld. J., 1985, vol. 64, pp. 42-48.
4. C.S. Smith and E.W. Palmer: Trans. AIME, 1933, vol. 104, pp. 133-68.
5. E.J. Czyryca: Key Eng. Mater., 1993, vol. 84, pp. 491-520.10.4028/www.scientific.net/KEM.84-85.491 ↗
6. P.J. Konkol, K.M. Stefanick, and G.S. Pike: Weld. J., 2011, vol. 90, pp. 34-41.
7. C. Revising: Report No. GAO-15-22, United States Government Accountability Office, Washington, DC, November 2014.
8. R.P. Foley and M.E. Fine: International Conference on Processing, Microstructure and Properties of Microalloyed and Other Modern High Strength Low Alloy Steels, Warrendale, PA, 1991, pp. 315–30.
9. D. Jain, D. Isheim, A.H. Hunter, and D.N. Seidman: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3860-72.10.1007/s11661-016-3569-5 ↗
10. G. Spanos, R.W. Fonda, R.A. Vandermeer, and A. Matuszeski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3277-93.10.1007/BF02669455 ↗
11. L.J. Cuddy and J.C. Raley: Metall. Trans. A, 1983, vol. 14A, pp. 1989-95.10.1007/BF02662366 ↗
12. T. Gladman: Proc. R. Soc. A, 1966, vol. 294, pp. 298-309.10.1098/rspa.1966.0208 ↗
13. M. Shome, D.S. Sarma, O.P. Gupta, and O.N. Mohanty: ISIJ Int. 2003, vol. 43, pp. 1431-37.10.2355/isijinternational.43.1431 ↗
14. G.R. Speich, D.S. Dabkowski, and L.F. Porter: Metall. Trans., 1973, vol. 4, pp. 303-15.10.1007/BF02649630 ↗
15. G. Krauss: Steels: Processing, Structure, and Performance, ASM International, Materials Park, OH, 2005, pp. 338-39.
16. B. Gault, M.P. Moody, J.M. Cairney, and S.P. Ringer: Atom Probe Microscopy, Springer, New York, NY, 2012.10.1007/978-1-4614-3436-8 ↗
17. T.F. Kelly and M.K. Miller: Rev. Sci. Instrum., 2007, vol. 78, p. 031101.10.1063/1.2709758 ↗
18. D.N. Seidman: Annu. Rev. Mater. Res., 2007, vol. 37, pp. 127-58.10.1146/annurev.matsci.37.052506.084200 ↗
19. A. Saha and G.B. Olson: J. Comput. Aided Mater. Des., 2007, vol. 14, pp. 177-200.10.1007/s10820-006-9031-z ↗
20. A. Saha, J. Jung, and G.B. Olson: J. Comput. Aided Mater. Des., 2007, vol. 14, pp. 201-33.10.1007/s10820-006-9032-y ↗
21. M.D. Mulholland and D.N. Seidman: Acta Mater., 2011, vol. 59, pp. 1881-97.10.1016/j.actamat.2010.11.054 ↗
22. J.S. Wang, M.D. Mulholland, G.B. Olson, and D.N. Seidman: Acta Mater., 2013, vol. 61, pp. 4939-52.10.1016/j.actamat.2013.04.052 ↗
23. D. Raabe, S. Sandlöbes, J. Millán, D. Ponge, H. Assadi, M. Herbig, and P.P. Choi: Acta Mater., 2013, vol. 61, pp. 6132-52.10.1016/j.actamat.2013.06.055 ↗
24. R.C. Thomson and M.K. Miller: Acta Mater., 1998, vol. 46, pp. 2203-13.10.1016/S1359-6454(97)00420-5 ↗
25. G.B. Olson, T.J. Kinkus, and J.S. Montgomery: Surf. Sci., 1991, vol. 246, pp. 238-45.10.1016/0039-6028(91)90421-N ↗
26. A. Afrouz, M.J. Collins, and R. Pilkington: Met. Technol., 1983, vol. 10, pp. 461-63.10.1179/030716983803291569 ↗
27. O.C. Hellman, J.A. Vandenbroucke, J. Rüsing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437-44.10.1007/S100050010051 ↗
28. R.P. Kolli and D.N. Seidman: Acta Mater., 2008, vol. 56, pp. 2073-88.10.1016/j.actamat.2007.12.044 ↗
29. B.D. Cullity and S.R. Stock: Elements of X-ray Diffraction, 3rd ed., Prentice Hall, Upper Saddle River, NJ, 2001, p. 351.
30. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2259-70.10.1007/s11661-001-0201-z ↗
31. F.D. Geuser and W. Lefebvre: Microsc. Res. Tech., 2011, vol. 74, pp. 257-63.10.1002/jemt.20899 ↗
32. S. Morito, K. Oh-ishi, K. Hono, and T. Ohba: ISIJ Int., 2011, vol. 51, pp. 1200-02.10.2355/isijinternational.51.1200 ↗
33. L. Morsdorf, C.C. Tasan, D. Ponge, and D. Raabe: Acta Mater., 2015, vol. 95, pp. 366-77.10.1016/j.actamat.2015.05.023 ↗
34. M.K. Miller, P.A. Beaven, and G.D.W. Smith: Metall. Trans. A, 1981, vol. 12, pp. 1197-1204.10.1007/BF02642333 ↗
35. C. Lerchbacher, S. Zinner, and H. Leitner: Micron, 2012, vol. 43, pp. 818-26.10.1016/j.micron.2012.02.005 ↗
36. B. Hutchinson, J. Hagström, O. Karlsson, D. Lindell, M. Tornberg, F. Lindberg, and M. Thuvander: Acta Mater., 2011, vol. 59, pp. 5845-58.10.1016/j.actamat.2011.05.061 ↗
37. G. Krauss: Mater. Sci. Eng. A, 1999, vol. 273, pp. 40-57.10.1016/S0921-5093(99)00288-9 ↗
38. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-27.
39. G.R. Speich: Trans. Met. Soc. AIME, 1969, vol. 245, pp. 2553-64.
40. E. Bemont, E. Cadel, P. Maugis, and D. Blavette: Surf. Interface Anal., 2004, vol. 36, pp. 585-88.10.1002/sia.1706 ↗
41. R.P. Kolli and D.N. Seidman: Microsc. Microanal., 2014, vol. 20, pp. 1727-39.10.1017/S1431927614013221 ↗
42. A.J. Breen, K.Y. Xie, M.P. Moody, B. Gault, H.W. Yen, C.C. Wong, J.M. Cairney, and S.P. Ringer: Microsc. Microanal., 2014, vol. 20, pp. 1100-10.10.1017/S1431927614012872 ↗
43. K. Miyata, T. Kushida, T. Omura, and Y. Komizo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1565-73.10.1007/s11661-003-0303-x ↗
44. W. Sha, L. Chang, G.D.W. Smith, L. Cheng, and E.J. Mittemeijer: Surf. Sci, 1992, vol. 266, pp. 416-23.10.1016/0039-6028(92)91055-G ↗
45. J.K. Stanley: Trans. AIME, 1949, vol. 185, pp. 752-61.
46. V.T. Borisov, V.M. Golikov, and G.V. Sherbedinskiy: Phys. Met. Metallogr, 1966, vol. 22, pp. 175-76.
47. C.J. Smithells, E.A. Brandes, and G.B. Brook: Smithells Metals Reference Book, Butterworth-Heinemann, Oxford, 1992.
48. A.W. Bowen and G.M. Leak: Metall. Trans., 1970, vol. 1, pp. 1695-1700.10.1007/BF02642019 ↗
49. R.J. Borg and D.Y.F. Lai: J. Appl. Phys., 1970, vol. 41, pp. 5193-5200.10.1063/1.1658644 ↗
50. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2099-2119.10.1016/S1359-6454(02)00054-X ↗
51. W. Song, J. von Appen, P. Choi, R. Dronskowski, D. Raabe, and W. Bleck: Acta Mater., 2013, vol. 61, pp. 7582-90.10.1016/j.actamat.2013.08.051 ↗
52. S.S. Babu, K. Hono, and T. Sakurai: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 499-508.10.1007/BF02651591 ↗
53. L. Chang and G.D.W. Smith: Le Journal de Physique Colloques, 1984, vol. 45, pp. C9-397–C9-401.10.1051/jphyscol:1984966 ↗
54. C. Zhu, X.Y. Xiong, A. Cerezo, R. Hardwicke, G. Krauss, and G.D.W. Smith: Ultramicroscopy, 2007, vol. 107, pp. 808-12.10.1016/j.ultramic.2007.02.033 ↗
55. M. Thuvander, J. Weidow, J. Angseryd, L.K.L. Falk, F. Liu, M. Sonestedt, K. Stiller, and H.O. Andrén: Ultramicroscopy, 2011, vol. 111, pp. 604-08.10.1016/j.ultramic.2010.12.024 ↗
56. D.W. Saxey: Ultramicroscopy, 2011, vol. 111, pp. 473-79.10.1016/j.ultramic.2010.11.021 ↗
57. R.P. Kolli and D.N. Seidman: Microsc. Microanal., 2007, vol. 13, pp. 272-84.10.1017/S1431927607070675 ↗
58. W.S. Owen: Trans. ASM, 1954, vol. 46, pp. 812-29.
59. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895-907.10.1007/BF02658309 ↗
60. G. Miyamoto, J.C. Oh, K. Hono, T. Furuhara, and T. Maki: Acta Mater., 2007, vol. 55, pp. 5027-38.10.1016/j.actamat.2007.05.023 ↗
61. J. Takahashi, K. Kawakami, and Y. Kobayashi: Ultramicroscopy, 2011, vol. 111, pp. 1233-38.10.1016/j.ultramic.2011.03.024 ↗
62. B.L. Tiemens, A.K. Sachdev, R.K. Mishra, and G.B. Olson: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3626-35.10.1007/s11661-012-1178-5 ↗
63. R.C. Glenn and E. Hornbogen: Trans. Metall. Soc. AIME, 1960, vol. 218, pp. 1064-70.
64. S.R. Goodman, S.S. Brenner, and J.R. Low: Metall. Trans., 1973, vol. 4, pp. 2363-69.10.1007/BF02669376 ↗
65. S. Pizzini, K.J. Roberts, W.J. Phythian, C.A. English, and G.N. Greaves: Philos. Magn. Lett., 1990, vol. 61, pp. 223-29.10.1080/09500839008202362 ↗
66. P.J. Othen, M.L. Jenkins, G.D.W. Smith, and W.J. Phythian: Philos. Magn. Lett., 1991, vol. 64, pp. 383-91.10.1080/09500839108215121 ↗
67. P.J. Othen, M.L. Jenkins, and G.D.W. Smith: Philos. Magn. A, 1994, vol. 70, pp. 1-24.10.1080/01418619408242533 ↗
68. G.R. Speich and R.A. Oriani: Trans. Met. Soc. AIME, 1965, vol. 233, pp. 623-31.
69. F.R.N. Nabarro: Proc. R. Soc. A, 1940, vol. 175, pp. 519-38.10.1098/rspa.1940.0072 ↗
70. D.J. Dyson, S.R. Keown, D. Raynor, and J.A. Whiteman: Acta Metall., 1966, vol. 14, pp. 867-75.10.1016/0001-6160(66)90007-1 ↗
71. D. Raynor, J.A. Whiteman, and R.W.K. Honeycombe: Iron Steel Inst. J., 1966, vol. 204, pp. 349-54.
72. W. Rong and G.L. Dunlop: Acta Metall., 1984, vol. 32, pp. 1591-99.10.1016/0001-6160(84)90218-9 ↗
73. J.A. Liddle, G.D.W. Smith, and G.B. Olson: Le Journal de Physique Colloques, 1986, vol. 47, pp. C7-223–C7-31.10.1051/jphyscol:1986739 ↗
74. Y.N. Shi and P.M. Kelly: J. Mater. Sci., 2002, vol. 37, pp. 2077-85.10.1023/A:1015289702308 ↗
75. J. Akré, F. Danoix, H. Leitner, and P. Auger: Ultramicroscopy, 2009, vol. 109, pp. 518-23.10.1016/j.ultramic.2008.11.010 ↗
76. J.S. Montgomery and G.B. Olson: Innovations in Ultrahigh Strength Steel Technology, in Proceeding of 34th Sagamore Army Materials Research Conference, G.B. Olson, M. Azrin, and E.S. Wright, eds., US Army Materials Technology Laboratory, Watertown, MA, 1990, pp 147–78.
77. S.R. Goodman, S.S. Brenner, and J.R. Low: Metall. Trans., 1973, vol. 4, pp. 2371-78.10.1007/BF02669377 ↗
78. D. Isheim, M.S. Gagliano, M.E. Fine, and D.N. Seidman: Acta Mater., 2006, vol. 54, pp. 841-49.10.1016/j.actamat.2005.10.023 ↗
79. D. Isheim, R.P. Kolli, M.E. Fine, and D.N. Seidman: Scr. Mater., 2006, vol. 55, pp. 35-40.10.1016/j.scriptamat.2006.02.040 ↗
80. F. Maury, N. Lorenzelli, and C.H. De Novion: J. Nucl. Mater., 1991, vol. 183, pp. 217-20.10.1016/0022-3115(91)90491-O ↗
81. K. Osamura, H. Okuda, K. Asano, M. Furusaka, K. Kishida, F. Kurosawa, and R. Uemori: ISIJ Int., 1994, vol. 34, pp. 346-54.10.2355/isijinternational.34.346 ↗
82. F. Vurpillot, A. Bostel, and D. Blavette: Appl. Phys. Lett., 2000, vol. 76, pp. 3127-29.10.1063/1.126545 ↗
83. M.E. Fine, J.Z. Liu, and M.D. Asta: Mater. Sci. Eng. A, 2007, vol. 463, pp. 271-74.10.1016/j.msea.2006.07.164 ↗
84. M. Kapoor, D. Isheim, G. Ghosh, S. Vaynman, M.E. Fine, and Y.W. Chung: Acta Mater., 2014, vol. 73, pp. 56-74.10.1016/j.actamat.2014.03.051 ↗
85. M. Perez, F. Perrard, V. Massardier, X. Kleber, A. Deschamps, H. De Monestrol, P. Pareige, and G. Covarel: Philos. Magn., 2005, vol. 85, pp. 2197-2210.10.1080/14786430500079645 ↗
86. F. Liu and H.O. Andrén: Ultramicroscopy, 2011, vol. 111, pp. 633-41.10.1016/j.ultramic.2010.12.012 ↗
87. M.D. Mulholland and D.N. Seidman: Microsc. Microanal., 2011, vol. 17, pp. 950-62.10.1017/S1431927611011895 ↗
88. G.M. Carinci, M.G. Hetherington, and G.B. Olson: Le Journal de Physique Colloques, 1988, vol. 49, pp. C6-311–C6-16.10.1051/jphyscol:1988654 ↗
89. H.F. Fischmeister, S. Karagöz, and H.O. Andren: Acta Metall., 1988, vol. 36, pp. 817-25.10.1016/0001-6160(88)90136-8 ↗
90. K. Stiller, L.E. Svensson, P.R. Howell, W. Rong, H.O. Andren, and G.L. Dunlop: Acta Metall., 1984, vol. 32, pp. 1457-67.10.1016/0001-6160(84)90092-0 ↗
91. H. Morikawa, H. Komatsu, and M. Tanino: J. Electron Microsc., 1973, vol. 22, pp. 99-101.
92. R. Ayer and P.M. Machmeier: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2510-17.10.1007/BF02652345 ↗