journal article·2016-06

Effect of Local Crystallographic Texture on the Fissure Formation During Charpy Impact Testing of Low-Carbon Steel

Abhijit Ghosh, Sudipta Patra, Arya Chatterjee, Debalay Chakrabarti

Publisher page

Abstract

The severity of the formation of fissures (also known as splitting or delamination) on the fracture surface of Charpy impact-tested samples of a low-carbon steel has been found to increase with the decrease in finish rolling temperature [1093 K to 923 K (820 °C to 650 °C)]. Combined scanning electron microscopy and electron back-scattered diffraction study revealed that crystallographic texture was the prime factor responsible for the fissure formation. Through-thickness texture band composed of cube [Normal Direction (ND)║〈001〉] and gamma [ND║〈111〉] orientations developed during the inter-critical rolling treatment. Strain incompatibility between these two texture bands causes fissure cracking on the main fracture plane. A new approach based on the angle between {001} planes of neighboring crystals has been employed in order to estimate the ‘effective grain size,’ which is used to determine the cleavage fracture stress on different planes of a sample. The severity of fissure formation was found to be directly related to the difference in cleavage fracture stress between the ‘main fracture plane’ and ‘fissure plane.’ Clustering of ferrite grains having cube texture promoted the fissure crack propagation along the transverse ‘fissure plane,’ by increasing the ‘effective grain size’ and decreasing the cleavage fracture stress on that plane.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Maney, London, 2002.
2. [2] Eric A. Almond: Metall. Trans., 1970, vol. 1, pp. 2038–41.10.1007/BF02642823 ↗
3. [3] H Herø, J Evensen, and J D Embury: Can. Metall. Q., 1975, vol. 14, pp. 117–22.10.1179/000844375795050328 ↗
4. [4] B. L. Bramfitt and A. R. Marder: Metall. Trans. A, 1977, vol. 8, pp. 1263–73.10.1007/BF02643841 ↗
5. [5] D. L. Bourell: Metall. Trans. A, 1983, vol. 14, pp. 2487–96.10.1007/BF02668890 ↗
6. [6] B. Mintz, E. M. Maina, and W. B. Morrison: Mater. Sci. Technol., 2008, vol. 24, pp. 177–88.10.1179/174367507X247377 ↗
7. [7] MS S Joo, D.-W. DW Suh, JH H Bae, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2012, vol. 546, pp. 314–22.10.1016/j.msea.2012.03.079 ↗
8. [8] Yuuji Kimura, Tadanobu Inoue, Fuxing Yin, and Kaneaki Tsuzaki: Science, 2008, vol. 320, pp. 1057–60.10.1126/science.1156084 ↗
9. [9] R. Schofield, G. Rowntree, N. V. Sarma, and R. T. Weiner: Met. Technol., 1974, vol. 1, pp. 325–31.10.1179/030716974803288112 ↗
10. [10] B. Mintz and W. B. Morrison: Mater. Sci. Technol., 2007, vol. 23, pp. 1346–56.10.1179/174328407X168801 ↗
11. [11] R. Song, D. Ponge, D. Raabe, and R. Kaspar: Acta Mater., 2005, vol. 53, pp. 845–58.10.1016/j.actamat.2004.10.051 ↗
12. [12] Min Yang, Yuh J. Chao, Xiaodong Li, David Immel, and Jinzhu Tan: Mater. Sci. Eng. A, 2008, vol. 497, pp. 451–61.10.1016/j.msea.2008.07.067 ↗
13. [13] B. Mintz, E. Maina, and W. B. Morrison: Mater. Sci. Technol., 2007, vol. 23, pp. 347–54.10.1179/174328407X161222 ↗
14. [14] Rachel Punch, Martin Strangwood, and Claire Davis: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4622–32.10.1007/s11661-012-1307-1 ↗
15. [15] B. Mintz and W B Morrison: Mater. Sci. Technol., 1988, vol. 4, pp. 719–31.10.1179/mst.1988.4.8.719 ↗
16. HL Haskel, E Pauletti, J de PaulaMartins, and ALM de Carvalho: Mater. Res., 2014, vol. 17, pp. 1238–5010.1590/1516-1439.268314 ↗
17. [17] G J Baczynski, J J Jonas, and L E Collins: Metall. Mater. Trans. A, 1999, vol. 30, pp. 3045–54.10.1007/s11661-999-0215-5 ↗
18. [18] Tadanobu Inoue, Fuxing Yin, Yuuji Kimura, Kaneaki Tsuzaki, and Shojiro Ochiai: Metall. Mater. Trans. A, 2009, vol. 41, pp. 341–55.
19. SY Shin, S Hong, J-H Bae, K Kim, and S Lee: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2333–49.10.1007/s11661-009-9943-9 ↗
20. [20] R. K. Ray and J. J. Jonas: Int. Mater. Rev., 1990, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗
21. [21] S. Nafisi, M.A. Arafin, L. Collins, and J. Szpunar: Mater. Sci. Eng. A, 2012, vol. 531, pp. 2–11.10.1016/j.msea.2011.09.072 ↗
22. [22] M.S. Joo, D.–W. Suh, J.H. Bae, N. Sanchez Mouriño, R. Petrov, L.A.I. Kestens, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2012, vol. 556, pp. 601–6.10.1016/j.msea.2012.07.033 ↗
23. [23] S. M. Toker, F. Rubitschek, T. Niendorf, D. Canadinc, and H. J. Maier: Scripta Mater., 2012, vol. 66, pp. 435–38.10.1016/j.scriptamat.2011.12.007 ↗
24. K. Kuhne, H. Dunnewald, and W. Dahl: in ECF4, Leoben 1982, 2013.
25. D. Chakrabarti, C. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
26. [26] A. Ghosh, S. Sahoo, M. Ghosh, R.N. Ghosh, and D. Chakrabarti: Mater. Sci. Eng. A, 2014, vol. 613, pp. 37–47.10.1016/j.msea.2014.06.091 ↗
27. B. Tanguy, R. Piques, L. Laiarinandrasana, and A. Pineau: in ECF13, San Sebastian 2000, 2013.
28. [28] K K Mathur and A Needleman and V Tvergaard: Model. Simul. Mater. Sci. Eng., 1994, vol. 2, p. 617.10.1088/0965-0393/2/3A/014 ↗
29. A. Arsenlis and D.M. Parks: Acta Mater., 1999, vol. 47, pp. 1597–1611.10.1016/S1359-6454(99)00020-8 ↗
30. [30] Stuart I. Wright, Matthew M. Nowell, and David P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316–29.10.1017/S1431927611000055 ↗
31. [31] G Baldi and G Buzzichelli: Met. Sci., 1978, vol. 12, pp. 459–72.10.1179/030634578790433332 ↗
32. [32] David Broek: Elementary Engineering Fracture Mechanics, Springer Netherlands, Dordrecht, 1986.10.1007/978-94-009-4333-9 ↗
33. [33] R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395–410.10.1016/0022-5096(73)90008-2 ↗
34. [34] D. Bhattacharjee, J. F. Knott, and C. L. Davis: Metall. Mater. Trans. A, 2004, vol. 35, pp. 121–30.10.1007/s11661-004-0115-7 ↗
35. J F Knott: Fundamentals of Fracture Mechanics, Butterworths, London, 1976.
36. [36] Debalay Chakrabarti, Martin Strangwood, and Claire Davis: Metall. Mater. Trans. A, 2009, vol. 40, pp. 780–95.10.1007/s11661-009-9794-4 ↗
37. [37] Nack J. Kim and Alvin H. Nakagawa: Mater. Sci. Eng., 1986, vol. 83, pp. 145–49.10.1016/0025-5416(86)90181-3 ↗
38. [38] Min-Chul Kim, Yong Jun Oh, and Jun Hwa Hong: Scripta Mater., 2000, vol. 43, pp. 205–11.10.1016/S1359-6462(00)00392-4 ↗
39. [39] Byoungchul Hwang, Chang Gil Lee, and Sung-Joon Kim: Metall. Mater. Trans. A, 2010, vol. 42, pp. 717–28.
40. [40] T Hanamura, F Yin, and K Nagai: ISIJ Int., 2004, vol. 44, pp. 610–17.10.2355/isijinternational.44.610 ↗
41. [41] I. Gutiérrez: Mater. Sci. Eng. A, 2013, vol. 571, pp. 57–67.10.1016/j.msea.2013.02.006 ↗
42. [42] A. Chatterjee, D. Chakrabarti, A. Moitra, R Mitra, and A. K. Bhaduri: Mater. Sci. Eng. A, 2015, vol. 630, pp. 58–70.10.1016/j.msea.2015.01.076 ↗
43. [43] Hyung-Joon Shin, Joong-Kyu An, Soo Ho Park, and Dong Nyung Lee: Acta Mater., 2003, vol. 51, pp. 4693–4706.10.1016/S1359-6454(03)00187-3 ↗
44. [44] R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
45. [46] T Zhai, A J Wilkinson, and J W Martin: Acta Mater., 2000, vol. 48, pp. 4917–27.10.1016/S1359-6454(00)00214-7 ↗
46. [47] A. King, W. Ludwig, M. Herbig, J.-Y. Buffière, A.A. Khan, N. Stevens, and T.J. Marrow: Acta Mater., 2011, vol. 59, pp. 6761–71.10.1016/j.actamat.2011.07.034 ↗
47. A.S. Argon and Y Qiao: Philos. Mag., 2002, vol. 82, pp. 1–18.10.1080/01418610208239992 ↗
48. [49] S. Suresh: Metall. Trans. A, 1983, vol. 14, pp. 2375–85.10.1007/BF02663313 ↗
49. [50] A. Ghosh, S. Kundu, and D. Chakrabarti: Scripta Mater., 2014, vol. 81, pp. 8–11.10.1016/j.scriptamat.2014.02.007 ↗
50. J. Sun and J.D. Boyd: in ICF 9-Sydney, Australia, 2012.
51. [52] P Brozzo and G Buzzichelli: Scripta Metall., 1976, vol. 10, pp. 235–40.10.1016/0036-9748(76)90369-0 ↗