In Situ XRD Studies of the Process Dynamics During Annealing in Cold-Rolled Copper
Source abstract
Abstract
The dynamics of the release of stored energy during annealing along two different crystallographic planes i.e.{111} and {220} in deformed copper have been investigated using in-situ X-ray diffraction measurements at 458K and 473K respectively. The study has been carried out on 50% and 80% rolled Cu sheets. The microstructures of the rolled samples have been characterised using optical microscope and Electron Back Scattered Diffraction measurements. The microstructural parameters were evaluated using Scherrer equation and the modified Rietveld technique from X-ray diffractogram. The stored energy along different planes were determined using the modified Stibitz formula from the X-ray peak broadening and the bulk stored energy has been evaluated using differential scanning calorimetry. The process dynamics of recovery and recrystallization as observed through the release of stored energy has been modelled as a second order and first order process respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. F.J.Humphreys, M.Hatherly, Recrystallization and Related Annealing Phenomena, 2nd edn. Elsevier, Oxford (2004).
2. [2] E. Nes, Prog. Mat. Sci. (1998), vol. 41, pp. 129-193.10.1016/S0079-6425(97)00032-7 ↗
3. [3] W.G. Burgers, Nature (1933), vol. 131, pp. 326-327.10.1038/131326a0 ↗
4. C.S. Barrett, L.H.Levenson, Trans. Metall. Soc. AIME (1940), vol. 137, pp. 112-27
5. C.S. Barrett, T.B. Masalaki, The structure of metals, Third (revised) ed., Oxford Permagon, Oxford, 1988.
6. [5] Ph. Gerber, J. Tarasiuk, Th. Chauveau, B. Bacroix, Ph. Gerber, J. Tarasiuk, Th. Chauveau, B. Bacroix, Acta Materialia, Acta Materialia (2003), vol. 51, pp. 6359–6371.10.1016/j.actamat.2003.08.039 ↗
7. [6] K. Piękoś, J. Tarasiuk, K. Wierzbanowski, B. Bacroix, Materials Science Forum (2008), vol. 571-572, pp. 231-236.10.4028/www.scientific.net/MSF.571-572.231 ↗
8. C. Deng, S.F. Liu, X.B. Hao, J.L. Ji, Z.Q. Zhang, Q. Liu. Int Journal of Refractory Metals and Hard Materials (2014), vol. 46, pp. 24–29.10.1016/j.ijrmhm.2014.05.005 ↗
9. [8] A.L. Etter, M.H. Mathon, T. Baudin, V. Branger, R. Penelle, Scripta Materialia (2002), vol. 46, pp. 311–317.10.1016/S1359-6462(01)01245-3 ↗
10. [9] N. Rajmohan, Y. Hayakawa, J. A. Szpunar, J.H. Root, Acta Mater. (1997), vol. 45, pp. 2385-2494.10.1016/S1359-6454(96)00371-0 ↗
11. A. Borbely and J.H. Driver: Proc. Int. Conf. on Recrystallization and Grain Growth, Aachen. G. Gottstein and D. Molodov, eds., Springer, Berlin, 2001, p. 635.
12. B. Bacroix, O. Castelnau, A. Miroux, and H. Réglé: Proceedings of the 21st Risø International Symposium on Materials Science, Roskilde, Danemark, 2000.
13. [12] M. Richert, J. Richert, A. Hotloś, W. Pachla and J. Skiba, Journal of Achievements in Materials and Manufacturing Engineering, (2011), vol. 44, pp. 50-56.
14. [13] H.W.F. Heller, C.A. Verbraaks and B. H. Kolster, Acta Metal. (1984), vol. 32, pp. 1391-1406.10.1016/0001-6160(84)90085-3 ↗
15. [14] B. Hutchinson, S. Jonsson and L. Ryde, Scripta Metallurgica (1989), vol. 23, pp. 671-676.10.1016/0036-9748(89)90510-3 ↗
16. [15] D. Mandal and I. Baker, Materials Science Forum (1996), vol. 207-209, pp. 521-524.10.4028/www.scientific.net/MSF.207-209.521 ↗
17. [16] A. Mucsi, Materials Science Forum, (2013), vol. 729, pp. 455-459.10.4028/www.scientific.net/MSF.729.455 ↗
18. [17] G. Mohamed and B. Bacroix, Acta Mater. (2000), vol. 48, pp. 3295-3302.10.1016/S1359-6454(00)00155-5 ↗
19. [18] G. Benchabane, Z. Boumerzoug, T. Gloriant, I. Thibo, Physica B, (2011), vol. 406, pp. 1973–1976.10.1016/j.physb.2011.02.068 ↗
20. F. Lin, D.J. Juul, and W. Pantleon: Recrystallization of deformed copper—kinetics and microstructural evolution, DTU Wind Energy. (DTU Wind Energy PhD; No. 0011(EN)), 2013.
21. [20] Y. A. Betanda, A-L Helbert, F. Brisset, M-H Mathon, T. Waeckerlé, T. Baudin, Materials Science & Engineering A (2014), vol. 614, pp. 193–198.10.1016/j.msea.2014.07.037 ↗
22. [21] D. Breuer, P. Klimanek and W. Pantleon, J. Appl. Cryst. (2000), vol. 33, pp. 1284-1294.10.1107/S0021889800008256 ↗
23. [22] T. Rzychoñ and K. Rodak, Archives of Materials Science and Eng. (2007), vol. 28, pp. 605-608.
24. [23] K. Piękoś, J. Tarasiuk, K. Wierzbanowski, Computational Materials Science (2008), vol. 42, pp. 584–594.10.1016/j.commatsci.2007.09.014 ↗
25. [24] L. Liu and I. Baker, Scripta Metallurgica et Materialia (1993), vol. 28, pp. 197–200.10.1016/0956-716X(93)90562-7 ↗
26. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. JuulJensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, A.D. Rollett, Materials Science and Engineering A (1997), vol. 238, pp. 219–274.10.1016/S0921-5093(97)00424-3 ↗
27. [26] J. Schamp, B. Verlinden and J. Van Humbeeck, Scripta Materialia (1996), vol. 34, pp. 1667-1672.10.1016/1359-6462(96)00034-6 ↗
28. [27] D. Rittel, A.A. Kidane, M. Alkhader, A. Venkert, P. Landau, G. Ravichandran, Acta Materialia (2012), vol. 60, pp. 3719–3728.10.1016/j.actamat.2012.03.029 ↗
29. [28] G.R. Stibitz, Phys. Rev. (1936), vol. 49, pp. 85910.1103/PhysRev.49.859 ↗
30. [29] A. Borbely, J. H. Driver and T. Ungar, Acta. Materialia (2000), vol. 48, pp. 2005-2016.10.1016/S1359-6454(99)00457-7 ↗
31. G.E. Dieter, Mechanical Metallurgy, 3rd edition. McGraw-Hill International Edition, New York, 1988
32. C. V. S. Lim Department of Material Science & Engineering: Carnegie Mellon University PhD Thesis, Length Scale Effect on the Microstructural Evolution of Cu layers in a Roll-Bonded CuNb Composite (2008).
33. T. Maitland, S. Sitzman: W. Zhou, Z. L. Wang (eds) Scanning microscopy and Nanotechnology. Springer, Berlin
34. A.J. Schwartz, M. Kumar, B.L. Adams and Field, eds., Electron Backscatter Diffraction in Materials Science, 2nd ed., Springer, New York, 2009.10.1007/978-0-387-88136-2 ↗
35. [34] S. Wronski, J. Tarasiuk, B. Bacroix, K. Wierzbanowski, H. Paul, Materials Characterization (2013), vol. 78, pp. 60–68.10.1016/j.matchar.2013.01.010 ↗
36. L. Lutterotti, S. Matthies, and H.R. Wenk: MAUD: a friendly Java program for material analysis using diffraction—IUCr: Newsletter of the CPD, 1999.
37. L. Lutterotti, P. Scardi, J. Appl. Crystallogr. (1990), vol. 23, pp. 246-252.10.1107/S0021889890002382 ↗
38. [36] P.S. Chowdhury, N. Gayathri, P. Mukherjee, M. Bhattacharya, A. Chatterjee, A. Dutta, P. Barat, Mat. Sci. and Eng. A (2011), vol. 528, pp. 967-97210.1016/j.msea.2010.09.102 ↗
39. [37] P. Scherrer, Nachr. Gott. (1918), vol. 2, pp. 98-100.
40. [38] M.B. Bever, D.L. Holt, A.L. Titchener, Progress in Materials Science (1973), vol. 17, pp. 5–177.10.1016/0079-6425(73)90001-7 ↗
41. [41] A.L. Titchener and M.B. Bever, Prog. Metal Phys., (1958), vol. 7, pp. 247-338.10.1016/0502-8205(58)90006-6 ↗
42. [39] P.A. Beck, Annealing of cold worked metals, Adv. Phys. (1954), vol. 3, pp. 245-324.10.1080/00018735400101203 ↗
43. M.B. Bever: Creep and Recovery ASM, Cleveland, 1957, vol. 14
44. [42] R. De Angelis, T. Snyder, J. House and W. Hosford, Advances in X-ray Analysis (2000), vol. 42, pp. 510-520.
45. T.L. Richards, S.F. Pugh and H.J.Stokes, Acta Metallurgica (1956), vol. 4, pp. 75-83.10.1016/0001-6160(56)90112-2 ↗