Kinetics of Ferrite Recrystallization and Austenite Formation During Intercritical Annealing of the Cold-Rolled Ferrite/Martensite Duplex Structures
Source abstract
Abstract
Ultrafine-grained, dual-phase (UFG DP) steels were produced by a new route using an uncommon cold-rolling and subsequent intercritical annealing of ferrite/martensite duplex starting microstructures. The effects of processing parameters such as rolling reduction, intercritical annealing temperature, and time on the microstructural evaluations have been studied. UFG DP steels with an average grain size of about 1 to 2 μm were achieved by short intercritical annealing of the 80 pct cold-rolled duplex microstructures. The kinetics of ferrite recrystallization and austenite formation were studied based on the Johnson–Mehl–Avrami–Kolmogorov (JMAK) model. The proposed model for describing the isothermal austenite formation kinetics was applied successfully to the nonisothermal conditions. It was found that complete recrystallization of ferrite before the austenite formation led to the formation of a large extent randomly distributed austenite in the ferrite matrix and a chain-networked structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. P.C. Chakraborti and M.K. Mitra: Mater. Sci. Eng. A, 2007, vol. 466, pp. 123–33.10.1016/j.msea.2007.02.042 ↗
2. K.S. Choi, W.N. Liu, X. Sun, and M.A. Khaleel: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 796–809.10.1007/s11661-009-9792-6 ↗
3. M. Calcagnotto, Y. Adachi, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 658–70.10.1016/j.actamat.2010.10.002 ↗
4. M. Papa Rao, V. Subramanya Sarma, and S. Sankaran: Mater. Sci. Eng. A, 2013, vol. 568, pp. 171–75.10.1016/j.msea.2012.12.084 ↗
5. M. Papa Rao, V. Subramanya Sarma, and S. Sankaran: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5313–17.10.1007/s11661-014-2478-8 ↗
6. Y.L. Kang: Theory and Technology of Processing and Forming for Advanced Automobile Steel Sheets, Metallurgical Industry Press, Beijing, China, 2009.
7. P. Jacques, X. Cornet, P. Harlet, J. Ladriere, and F. Delannay: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2383–93.10.1007/s11661-998-0114-1 ↗
8. G.R. Speich and R.L. Miller: in Structure and Properties of Dual-Phase Steels, R.A. Kot and J.W. Morris, eds., AIME, New York, 1979, pp. 13–22.
9. J.O. Arnold and A. McWilliams: J. Iron Steel Inst., 1905, No. 2, p. 352.
10. G.A. Roberts and R.F. Mehl: Trans. ASM, 1943, vol. 31, pp. 613–50.
11. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A, 1981, vol. 12, pp. 1419–28.10.1007/BF02643686 ↗
12. S.K. Nath, S. Ray, V.N.S. Mathur, and M.L. Kapoor: ISIJ Int., 1994, vol. 34, pp. 191–97.10.2355/isijinternational.34.191 ↗
13. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
14. T. Waterschoot, K. Verbeken, and B.C. De Cooman: ISIJ Int., 2006, vol. 46, pp. 138–46.10.2355/isijinternational.46.138 ↗
15. M. Asadi Asadabad, M. Goodarzi, and Sh. Kheirandish: ISIJ Int., 2008, vol. 48, pp. 1251–55.10.2355/isijinternational.48.1251 ↗
16. G.I. Garcia and A.J. Deardo: Metall. Trans. A, 1981, vol. 12, pp. 521–30.10.1007/BF02648551 ↗
17. J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3363–75.10.1007/s11661-004-0173-x ↗
18. D.Z. Yang, E.L. Brown, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1985, vol. 16, pp. 1385–92.10.1007/BF02658671 ↗
19. Y. Okitsu, N. Takata, and N. Tsuji: Scripta Mater., 2009, vol. 60, pp. 76–79.10.1016/j.scriptamat.2008.09.002 ↗
20. A. Karmakar, A. Karani, S. Patra, and D. Chakrabarti: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2041–52.10.1007/s11661-012-1556-z ↗
21. D. Quidort and Y.J.M. Brechet: ISIJ Int., 2002, vol. 42, pp. 1010–17.10.2355/isijinternational.42.1010 ↗
22. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: ISIJ Int., 2011, vol. 51, pp. 958–64.10.2355/isijinternational.51.958 ↗
23. J. Qu, W. Dabboussi, F. Hassani, J. Nemes, and S. Yue: ISIJ Int., 2005, vol. 45, pp. 1741–46.10.2355/isijinternational.45.1741 ↗
24. M. Calcagnotto, D. Ponge, and D. Raabe: ISIJ Int., 2012, vol. 52, pp. 874–83.10.2355/isijinternational.52.874 ↗
25. P. Movahed, S. Kolahgar, S.P.H. Marashi, M. Pouranvari, and N. Parvin: Mater. Sci. Eng. A, 2009, vol. 518, pp. 1–6.10.1016/j.msea.2009.05.046 ↗
26. S. Sodjit and V. Uthaisangsuk: Mater. Des., 2012, vol. 41, pp. 370–79.10.1016/j.matdes.2012.05.010 ↗
27. S. Sun and M. Pugh: Mater. Sci. Eng. A, 2002, vol. 335, pp. 298–308.10.1016/S0921-5093(01)01942-6 ↗
28. A. Bag and K.K. Ray: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2400–403.10.1007/s11661-001-0215-6 ↗
29. S.C. Hong and K.S. Lee: Mater. Sci. Eng. A, 2002, vol. 323, pp. 148–59.10.1016/S0921-5093(01)01359-4 ↗
30. J. Burke: Kinetics of Phase Transformations in Metals, Pergamon, London, 1965, p. 145.
31. E.S. Machlin: An Introduction to Aspects of Thermodynamics and Kinetics Relevant to Materials Science, Elsevier, Amsterdam, 2007, p. 284.
32. J. Kohout: J. Mater. Sci., 2008, vol. 43, pp. 1334–39.10.1007/s10853-007-2255-9 ↗
33. Z. Guo, W. Sha, and D. Li: Mater. Sci. Eng. A, 2004, vol. 373, pp. 10–20.10.1016/j.msea.2004.01.040 ↗
34. J. Lis and A. Lis: J. Achiev. Mater. Manufact. Eng., 2008, vol. 26, pp. 195–98.
35. H. Sueyoshi and K. Suenaga: J. Jpn. Inst. Met., 1987, vol. 51, pp. 518–24.10.2320/jinstmet1952.51.6_518 ↗
36. C. Wert: Phys. Rev., 1950, vol. 79, pp. 601–605.10.1103/PhysRev.79.601 ↗
37. J.S. Kirkaldy and D. Venugopalan: in Phase Transformations in Ferrous Alloys, A.R. Marker and J.I. Goldstein, eds., TMS-AIME, Warrendale, PA, 1984, pp. 125–48.
38. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, Chapman & Hall, London, 1992, p. 78.10.1007/978-1-4899-3051-4 ↗
39. J. Huang, R.P. Hammond, K. Conlon, and W.J. Poole: in Proceedings of International Conference on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschaftsverlag Mainz GmbH, Aachen, 2002, pp. 187–91.
40. N. Nakada, Y. Arakawa, K.S. Park, T. Tsuchiyama, and S. Takaki: Mater. Sci. Eng. A, 2012, vol. 553, pp. 128–33.10.1016/j.msea.2012.06.001 ↗
41. N. Peranio, Y.J. Li, F. Roters, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4161–68.10.1016/j.msea.2010.03.028 ↗