journal article·2014-07

On the Ductility of Magnesium Single Crystals at Ambient Temperature

Konstantin D. Molodov, Talal Al-Samman, Dmitri A. Molodov, Günter Gottstein

Publisher page

Abstract

Magnesium single crystals were loaded in plane-strain compression at ambient temperature, parallel, and normal to the c-axis. In the latter configuration, compression was applied along the 〈\( 11\overline{2}0 \)〉 as well as 〈\( 10\overline{1}0 \)〉 directions, whereby extension was confined to the c-axis owing to the plane-strain geometry. Out of the three tested orientations, only specimens compressed along the 〈\( 11\overline{2}0 \)〉 axis were able to deform up to a remarkable strain of −1 demonstrating a surprisingly high ductility for pure magnesium at ambient temperature. The other two specimen orientations have depicted failure at two different low strains. The final microstructure of the ductile specimen was a polycrystalline mix of large deformed grains adjoining recrystallized regions of much finer grains, developed by means of extensive dynamic recovery. The corresponding final texture was relatively weak, and showed two orientation peaks with appreciable scatter around them.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. R.E. Reed-Hill and W.D. Robertson, Acta Metallurgica 1957, vol. 5, pp. 728-737.10.1016/0001-6160(57)90075-5 ↗
2. H. Yoshinaga and R. Horiuchi, Transactions of the Japan Institute of Metals 1963, vol. 4, pp. 1-8.10.2320/matertrans1960.4.1 ↗
3. B.C. Wonsiewicz and W.A. Backofen, Transactions of the metallurgical society of AIME 1967, vol. 239, pp. 1422-31.
4. E.W. Kelly and W.F. Hosford, Transactions of the metallurgical society of AIME 1968, vol. 242, pp. 5-13.
5. H. Kitahara, F. Maruno, M. Tsushida and S. Ando, Materials Science and Engineering: A 2014, vol. 590, pp. 274-280.10.1016/j.msea.2013.10.025 ↗
6. Q. Li, Materials Science and Engineering: A 2013, vol. 568, pp. 96-101.10.1016/j.msea.2013.01.028 ↗
7. J.H. Shin, S.H. Kim, T.K. Ha, K.H. Oh, I.S. Choi and H.N. Han, Scripta Materialia 2013, vol. 68, pp. 483-486.10.1016/j.scriptamat.2012.11.030 ↗
8. A. Chapuis: Mater. Sci. Eng. A 2014, vol. 590, pp. 401-405.10.1016/j.msea.2013.10.052 ↗
9. M. Bian and K. Shin, Met. Mater. Int. 2013, vol. 19, pp. 999-1004.10.1007/s12540-013-5012-4 ↗
10. B. Syed, J. Geng, R.K. Mishra and K.S. Kumar, Scripta Materialia 2012, vol. 67, pp. 700-703.10.1016/j.scriptamat.2012.06.036 ↗
11. A. Chapuis and J.H. Driver, Acta Materialia 2011, vol. 59, pp. 1986-1994.10.1016/j.actamat.2010.11.064 ↗
12. T. Al-Samman, K.D. Molodov, D.A. Molodov, G. Gottstein and S. Suwas, Acta Materialia 2012, vol. 60, pp. 537-545.10.1016/j.actamat.2011.10.013 ↗
13. S.E. Ion, F.J. Humphreys and S.H. White, Acta Metallurgica 1982, vol. 30, pp. 1909-1919.10.1016/0001-6160(82)90031-1 ↗
14. T. Al-Samman and G. Gottstein, Materials Science and Engineering: A 2008, vol. 488, pp. 406-414.10.1016/j.msea.2007.11.056 ↗
15. D.A. Molodov, V.A. Ivanov and G. Gottstein, Acta Materialia 2007, vol. 55, pp. 1843-1848.10.1016/j.actamat.2006.10.045 ↗
16. F. Bachmann, R. Hielscher and H. Schaeben, Solid State Phenomena 2010, vol. 160, pp. 63-68.10.4028/www.scientific.net/SSP.160.63 ↗
17. H. El Kadiri and A.L. Oppedal, Journal of the Mechanics and Physics of Solids 2010, vol. 58, pp. 613-624.10.1016/j.jmps.2009.12.004 ↗
18. A.L. Oppedal, H. El Kadiri, C.N. Tomé, G.C. Kaschner, S.C. Vogel, J.C. Baird and M.F. Horstemeyer, International Journal of Plasticity 2012, vol. 30–31, pp. 41-61.10.1016/j.ijplas.2011.09.002 ↗
19. T. Al-Samman and G. Gottstein, Materials Science and Engineering: A 2008, vol. 490, pp. 411-420.10.1016/j.msea.2008.02.004 ↗
20. N.V. Dudamell, I. Ulacia, F. Gálvez, S. Yi, J. Bohlen, D. Letzig, I. Hurtado and M.T. Pérez-Prado, Materials Science and Engineering: A 2012, vol. 532, pp. 528-535.
21. A. Galiyev, R. Kaibyshev and G. Gottstein, Acta Materialia 2001, vol. 49, pp. 1199-1207.10.1016/S1359-6454(01)00020-9 ↗
22. J.C. Tan and M.J. Tan, Materials Science and Engineering: A 2003, vol. 339, pp. 124-132.10.1016/S0921-5093(02)00096-5 ↗
23. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama and K. Higashi, Acta Materialia 2003, vol. 51, pp. 2055-2065.10.1016/S1359-6454(03)00005-3 ↗
24. Y.-J. Qin, Q.-L. Pan, Y.-B. He, W.-B. Li, X.-Y. Liu and X. Fan, Materials Science and Engineering: A 2010, vol. 527, pp. 2790-2797.10.1016/j.msea.2010.01.035 ↗