journal article·2015-06Open access

Age Hardening in Ultrafine-Grained Al-2 Pct Fe Alloy Processed by High-Pressure Torsion

Jorge M. Cubero-Sesin, Zenji Horita

Abstract

A cast Al-2 wt pct Fe alloy was processed by high-pressure torsion (HPT) at room temperature and then subjected to artificial aging at temperatures of 373 K and 473 K (100 °C and 200 °C). The aging behavior was studied by Vickers microhardness measurements and by microstructural analyses using transmission electron microscopy and X-ray diffraction. The initial intermetallic structures, composed of a mixture of Al + Al6Fe and Al + Al3Fe eutectics phases, were partially dissolved in the matrix up to a supersaturation of ~1 wt pct Fe. The microstructure was refined by HPT to an ultrafine-grained level with a minimum grain size of ~120 nm in the matrix and a dispersion of particles less than 400 nm. Age hardening was achieved within 0.25 hours at 473 K (200 °C), to a maximum UTS of ~700 MPa as a result of nano-sized precipitation within the ultrafine grains. The uniform elongation exceeded ~12 pct even at intermediate levels of imposed strain by HPT, while it decreased to ~6 pct with the subsequent aging treatment. The thermal stability of the ultrafine-grained structure was verified to exceed 16 days at 373 K (100 °C) and 12 hours at 473 K (200 °C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
2. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y.T. Zhu: JOM, 2006, vol. 58, pp. 33–39.10.1007/s11837-006-0213-7 ↗
3. Y. Estrin and A. Vinogradov: Acta Mater., 2013, vol. 61, pp. 782–817.10.1016/j.actamat.2012.10.038 ↗
4. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
5. I. Sabirov, M.Y. Murashkin, and R.Z. Valiev: Mater. Sci. Eng. A, 2013, vol. 560, pp. 1–24.10.1016/j.msea.2012.09.020 ↗
6. P.J. Black: Acta Crystallogr., 1955, vol. 8, pp. 43–48.10.1107/S0365110X5500011X ↗
7. P.J. Black: Acta Crystallogr., 1955, vol. 8, pp. 175–82.10.1107/S0365110X55000637 ↗
8. L.K. Walford: Acta Crystallogr., 1965, vol. 18, pp. 287–91.10.1107/S0365110X65000610 ↗
9. R.M.K. Young and T.W. Clyne: Scripta Metall., 1981, vol. 15, pp. 1211–16.10.1016/0036-9748(81)90301-X ↗
10. P. Skjerpe: Metall. Trans. A, 1987, vol. 18A, pp. 189–200.10.1007/BF02825700 ↗
11. P. Skjerpe: Acta Crystallogr. B, 1988, vol. 44, pp. 480–86.10.1107/S0108768188005245 ↗
12. S.D. Forder, J.S. Brooks, and P.V. Evans: Scripta Mater., 1996, vol. 35, pp. 1167–73.10.1016/1359-6462(96)00273-4 ↗
13. N.A. Belov, A.A. Aksenov, and D.G. Eskin: Iron in Aluminum Alloys: Impurity and Alloying Element, 1st ed., Taylor and Francis, London, 2002, pp. 1–7.10.1201/9781482265019 ↗
14. C.M. Adam and L.M. Hogan: Acta Metall., 1975, vol. 23, pp. 345–54.10.1016/0001-6160(75)90127-3 ↗
15. I.R. Hughes and H. Jones: J. Mater. Sci., 1976, vol. 11, pp. 1781–93.10.1007/BF00708256 ↗
16. I.R. Hughes and H. Jones: J. Mater. Sci., 1977, vol. 12, pp. 323–33.10.1007/BF00566274 ↗
17. C.M. Adam and L.M. Hogan: J. Aust. Inst. Met., 1972, vol. 17, p. 81.
18. C.M. Adam and J.A. Eady: Acta Metall., 1979, vol. 27, pp. 79–87.10.1016/0001-6160(79)90058-0 ↗
19. J. Strid, D.A. Porter, and K.E. Easterling: Mater. Sci. Technol., 1985, vol. 1, pp. 161–66.10.1179/mst.1985.1.2.161 ↗
20. A. Tonejc and A. Bonefacic: J. Appl. Phys., 1969, vol. 40, pp. 419–20.10.1063/1.1657073 ↗
21. A. Tonejc: Metall. Trans., 1971, vol. 2, pp. 437–40.10.1007/BF02663331 ↗
22. H. Jones: Mater. Sci. Eng. A, 1969, vol. 5, pp. 1–18.10.1016/0025-5416(69)90077-9 ↗
23. H. Jones: Scripta. Metall., 1983, vol. 17, pp. 97–100.10.1016/0036-9748(83)90078-9 ↗
24. D. Kunstelj and A. Bonefacic: Metallography, 1969, vol. 2, pp. 329–36.10.1016/0026-0800(69)90063-9 ↗
25. D. Kunstelj and A. Bonefacic: Metallography, 1970, vol. 3, pp. 79–87.10.1016/0026-0800(70)90007-8 ↗
26. M.H. Jacobs, A.G. Doggett, and M.J. Stowell: J. Mater. Sci., 1974, vol. 9, pp. 1631–43.10.1007/BF00540762 ↗
27. G. Thursfield and M.J. Stowell: J. Mater. Sci., 1974, vol. 9, pp. 1644–60.10.1007/BF00540763 ↗
28. J.D. Cotton and M.J. Kaufman: Metall. Trans. A, 1991, vol. 22A, pp. 927–34.10.1007/BF02659002 ↗
29. D.K. Mukhopadhyay, C. Suryanarayana, and F.H. Froes: Scripta Metall. Mater., 1994, vol. 31, pp. 333–38.10.1016/0956-716X(94)90292-5 ↗
30. D.K. Mukhopadhyay, C. Suryanarayana, and F. H. Froes: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1939–46.10.1007/BF02670665 ↗
31. F. Cardellini, V. Contini, and G. Mazzone: J. Mater. Sci., 1996, vol. 31, pp. 4175–80.10.1007/BF00356436 ↗
32. F. Cardellini, V. Contini, R. Gupta, G. Mazzone, A. Montone, A. Perin, and G. Principi: J. Mater. Sci., 1998, vol. 33, pp. 2519–27.10.1023/A:1004388732126 ↗
33. T.T. Sasaki, T. Ohkubo, and K. Hono: Acta Mater., 2009, vol. 57, pp. 3529–38.10.1016/j.actamat.2009.04.012 ↗
34. S.S. Nayak, M. Wollgarten, J. Banhart, S.K. Pabi, and B.S. Murty: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2370–78.10.1016/j.msea.2009.12.044 ↗
35. O.N. Senkov, F.H. Froes, V.V. Stolyarov, R.Z. Valiev, and J. Liu: Nanostruct. Mater., 1998, vol. 10, pp. 691–98.10.1016/S0965-9773(98)00107-X ↗
36. V.V. Tcherdyntsev, S.D. Kaloshkin, D.V. Gunderov, E.A. Afonina, I.G. Brodova, V.V. Stolyarov, Y.V. Baldokhin, E.V. Shelekhov, and I.A. Tomilin: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 888–93.10.1016/j.msea.2003.10.207 ↗
37. J.M. Cubero-Sesin and Z. Horita: J. Mater. Sci., 2013, vol. 48, pp. 4713–22.10.1007/s10853-012-6935-8 ↗
38. D. Tabor: Rev. Phys. Technol., 1970, vol. 1, pp. 145–79.10.1088/0034-6683/1/3/I01 ↗
39. T. Hu, K. Ma, T.D. Topping, J.M. Schoenung, and E.J. Lavernia: Acta Mater., 2013, vol. 61, pp. 2163–78.10.1016/j.actamat.2012.12.037 ↗
40. K. Ma, H. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman, E.J. Lavernia, and J.M. Schoenung: Acta Mater., 2014, vol. 62, pp. 141–55.10.1016/j.actamat.2013.09.042 ↗
41. T. Hu, K. Ma, T.D. Topping, B. Saller, A. Yousefiani, J.M. Schoenung, and E.J. Lavernia: Scripta Mater., 2014, vol. 78–79, pp 25–28.10.1016/j.scriptamat.2014.01.020 ↗
42. S. Hirosawa, T. Hamaoka, Z. Horita, S. Lee, K. Matsuda, and D. Terada: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3921–33.10.1007/s11661-013-1730-y ↗
43. S. Lee, Z. Horita, S. Hirosawa, and K. Matsuda: Mater. Sci. Eng. A, 2012, vol. 546, pp. 82–89.10.1016/j.msea.2012.03.029 ↗
44. I.F. Mohamed, Y. Yonenaga, S. Lee, K. Edalati, and Z. Horita: Mater. Sci. Eng. A, 2015, vol. 627, pp. 111–18.10.1016/j.msea.2014.12.117 ↗
45. S. Lee, K. Tazoe, I.F. Mohamed, and Z. Horita: Mater. Sci. Eng. A, 2015, vol. 628, pp. 56–61.10.1016/j.msea.2015.01.026 ↗
46. G.E Totten and D.S. MacKenzie: Handbook of Aluminum Volume I: Physical Metallurgy and Processes, 1st ed., Marcel Dekker, Inc., New York, NY, 2003, p. 815.
47. C.A. Stickels and R.H. Bush: Metall. Trans., 1971, vol. 2, pp. 2031–42.10.1007/BF02917529 ↗
48. A. Yamamoto, T. Kato, and H. Tsubakino: Mater. Trans., 2004, vol. 45, pp. 3106–13.10.2320/matertrans.45.3106 ↗
49. K. Oh-ishi, K. Edalati, H.S. Kim, K. Hono, and Z. Horita: Acta Mater., 2013, vol. 61, pp. 3482–89.10.1016/j.actamat.2013.02.042 ↗
50. H.P. Klug and L.E. Alexander: X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed., Wiley Interscience, United States of America, 1974.