journal article·2015-04

In Situ Observation of Solidification Conditions in Pulsed Laser Welding of AL6082 Aluminum Alloys to Evaluate Their Impact on Hot Cracking Susceptibility

Philipp von Witzendorff, Stefan Kaierle, Oliver Suttmann, Ludger Overmeyer

Publisher page

Abstract

The influence of laser pulse parameters on solidification conditions and hot crack formation in pulsed laser welding of Al6082 aluminum alloys was studied with the aid of high-speed cameras capturing visible and infrared radiation. Hot cracking was evaluated with respect to strain rate, strain, and metallurgical outcome. The strain rate was approximated by the product of interface velocity and temperature gradient at the interface. The temperature gradient decreases during the course of solidification and followed a specific course. The interface velocity was therefore used as an indicator for the strain rate, which increased in a logarithmic manner with respect to the slope of the laser pulse’s cooling time. The accumulated strain was calculated by measuring the spot weld deformation during solidification. Within the heat-conduction welding regime, hot cracking can be reduced by lowering the interface velocity leading to a reduced strain rate and enhanced permeability of the dendritic microstructure. An over-proportional increase of the accumulated strain was observed for keyhole welding, which led to a high susceptibility to hot cracking regardless of the interface velocity. At low interface velocities, hot cracking was induced by extensive hydrogen diffusion at the solid–liquid interface, which promotes crack initiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. W. M. Steen: Laser Material Processing, 3rd ed., Springer-Verlag, New York, 2003, pp. 169-72.10.1007/978-1-4471-3752-8 ↗
2. J. G. Kaufman and E. L. Rooy: Aluminum Alloy Castings: Properties, Processes, and Applications, 1st ed., American Technical Publishers Ltd., Materials Park, 2004, p. 18.10.31399/asm.tb.aacppa.9781627083355 ↗
3. M. J. Cieslak and P. W. Fuerschbach: Metall. Trans. B, 1988, vol. 19B, pp. 319 – 29.10.1007/BF02654217 ↗
4. S. Katayama: Weld. Int., 2001, vol. 15 (8), pp. 627-36.10.1080/09507110109549415 ↗
5. D.G. Eskin and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1511-19.10.1007/s11661-007-9169-7 ↗
6. M. Rappaz, J.-M. Drezet and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449-55.10.1007/s11661-999-0334-z ↗
7. N. Coniglio and C.E. Cross: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2718-28.10.1007/s11661-009-9964-4 ↗
8. T.S. Piwonka and M.C. Flemings: Trans. AIME, 1966, vol. 236, pp. 1157-65
9. K. Kubo and R.D. Pehlke: Metall. Trans. B, 16B (1985) 359-6610.1007/BF02679728 ↗
10. M. Sistaninia, A. B. Phillion, J.-M. Drezet, M. Rappaz: Acta Mater., 2012, vol. 60, pp. 3902-11.10.1016/j.actamat.2012.03.036 ↗
11. W. Suyitno, W.H. Kool, and L. Katgermann: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2388–240010.1007/s11661-009-9941-y ↗
12. Y. Arata, F. Matsuda, K. Nakata, and I. Sasaki: Trans. JWRI, 1976, vol. 5(2), pp. 53–67.
13. Y. Arata, F. Matsuda, K. Nakata, K. Shinozaki: Trans. JWRI, 1977, vol. 6 (1), pp. 91-104.10.1007/BF00165369 ↗
14. K. Nakata and F. Matsuda: Trans. of JWRI, 1995, Vol. 24 (1), pp. 83-94.
15. N. Coniglio: Aluminum Alloy Weldability: Identification of Weld Solidification Cracking Mechanisms through Novel Experimental Technique and Model Development, 1st ed., Bundesanstalt für Materialforschung und –prüfung, Berlin, 2008, p. 138.
16. M. Drezet, M.S.-F. Lima, J.D. Wagniere, M. Rappaz, and W. Kurz: Proc. of the International Institute of Welding Conference, P. Mayr, G. Posch, and H. Cerjak, eds., 2008, pp. 87–94.
17. Z. Tang, F. Vollertsen: Weld. World, 2014, vol. 58, pp. 355-66.10.1007/s40194-014-0121-3 ↗
18. E. Cicala, G. Duffet, H. Andrzejewski, D. Grevey and S. Ignat: Mater. Sci. Eng. A, 2005, vol. 395, pp. 1–9.10.1016/j.msea.2004.11.026 ↗
19. A. El-Batahgy and M. Kutsuna: Adv. Mater. Sci. Eng., 2009, pp. 1–9. DOI:10.1155/2009/97418210.1155/2009/974182 ↗
20. M. C. Flemings: Solidification Processing, McGraw-Hill Inc., New York, 1974.
21. J. Wang, H.-P. Wang, X. Wang, H. Cui, F. Lu: Optics & LaserTechnol., 2015,vol. 66, pp. 15–21.
22. J. Zhang, D. C. Weckmann and Y. Zhou: Weld. J., 2008, vol. 87, pp. 18– 30.
23. J. Liu, Z. Rao, S. Liao, and P.-C. Wang: Int. J. Adv. Manuf. Technol., 2014. DOI:10.1007/s00170-014-5935-z.10.1007/s00170-014-5935-z ↗
24. M. Sheikhi, F. Malek Ghaini, M. J. Torkamany and J. Sabbaghzadeh: Sci. Technol. Weld. Joining, 2009, vol. 14(2), pp. 161-5.10.1179/136217108X386554 ↗
25. M. Sheikhi, F. Malek Ghaini and H. Assadi: Sci. Technol. Weld. Joining, 2014, vol. 19 (3), pp. 250-5.10.1179/1362171813Y.0000000190 ↗
26. E.J. Michaud, H.W. Kerr, and D.C. Weckman: Proc. 4th In. Conf. Trends in Welding Research, Tennessee, 1995, pp. 153–58.
27. S. Katayama, M. Mizutani and A. Matsunawa: Sci. Technol. Weld. Joi., 1997, vol. 2(1), pp.1-9.10.1179/stw.1997.2.1.1 ↗
28. J. Dworak: Weld. Int., 2014, vol. 28(7), pp. 501-9.10.1080/09507116.2012.753215 ↗
29. J. P. Bergmann, M. Bielenin, M. Stambke, T. Feustel, P. von Witzendorff, J. Hermsdorf: Physics Procedia, 2013, vol. 41, pp. 180 – 9.10.1016/j.phpro.2013.03.068 ↗
30. B.-C. Kim, T.-H. Kim, K.-B. Kim, J.-S. Kim and H.-Y. Lee: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1499-59.
31. K. Kadoi, A. Fujinaga, M. Yamamoto and K. Shinozaki: Weld World, 2013, vol. 57, pp. 383-90.
32. G.E. Totten and D.S. MacKenzie: Handbook of Aluminum, 1st edn, Marcel Dekker, New York, 2003, p. 56.10.1201/9780203912591 ↗
33. M. Moeller and M. Miething: Giesserei-Z., 1924, vol. 21, pp. 444-46.
34. E.J. Michaud, D.C. Weckmann, and H.W. Kerr: Proc. of International Congress on Applications of Lasers and Electro Optics, Orlando, 1994, pp. 461–70.10.2351/1.5058824 ↗
35. M. Sheikhi, F. Malek Ghaini and H. Assadi: Acta Materialia, 2015, vol. 82, pp. 491–502.10.1016/j.actamat.2014.09.002 ↗
36. R. Y. Lin and M. Hoch: Metall. Trans. A, 1989, vol. 20 (9), pp. 1785-91.10.1007/BF02663209 ↗
37. A. Matsunawa, S. Katayama, and Y. Fujita: Proc. 7 th Conf. Joints in Aluminium – Inalco 98, Woodhead Publishing Ltd., Cambridge, 1999, pp. 65–76.
38. P. Praveen and P.K.D.V. Yarlagadda: J. Mater. Proc. Technol., 2005, vol. 164-165, pp. 1106-12.10.1016/j.jmatprotec.2005.02.224 ↗
39. S. Kou: Welding Metallurgy,2nd edn., John Wiley & Sons, Inc., Hoboken, New Jersey, 2003, p. 166.
40. I. Farup, J.-M. Drezet and M. Rappaz: Acta Mater., 2001, vol. 49, 1261-69.10.1016/S1359-6454(01)00013-1 ↗
41. L.M. Stein: Interpolation of Spatial Data: Some Theory for Kriging, 1st edn., Springer-Verlag, New York, 1999, pp. 7–9.10.1007/978-1-4612-1494-6 ↗
42. Unitek Miyachi Corporation: Nd:YAG Laser Welding Guide, Unitek Miyachi Corporation, Monrovia, California, 2003, p. 9.