Nucleation of solid aluminum on inclusion particles injected into Al-Si-Fe alloys
Source abstract
Abstract
Systematic inoculation experiments were carried out to study the influence of various inclusions on the nucleation of the α-Al phase in Al-Si-Fe alloys at different cooling rates. The results showed that in dilute alloys, containing less than 1.5 pct Si+Fe, almost all the inclusion types have high percentages of occurrence within the α-Al phase, indicating that nucleation can be promoted on the surface of such inclusions. In a hypoeutectic Al-Si alloy containing 6.3 pct Si, the inclusion particles of MgO, TiB2, TiC, α-Al2O3, and SiC become mostly inactive nucleants and are pushed to the interdendritic regions because of the dominating poisoning effect of Si. The current results were used successfully to explain the efficiency differences between the commercial grain refiners in the hypoeutectic Al-Si alloys. Silicon is observed to preferentially segregate to the liquid-Al/inclusion interfaces so as to lower the free energy of such interfaces. A theoretical analysis of the poisoning effect of Si showed that Si segregation to the liquid/nucleant interface alters the interfacial energy balance so that the catalytic efficiency of the nucleant particles is dramatically reduced. Careful analysis showed that the poisoning effect of Si in the hypoeutectic alloy is overcome when the nucleant particles have active surface characteristics, as represented by the high catalytic potencies of γ-Al2O3, CaO, and Al4C3 particles in nucleating the α-Al phase of the hypoeutectic Al-Si alloy. Although some inclusions have comparable or higher occurrence levels than TiB2 in the α-Al phase, they cannot be used as efficient nucleants because of either their poor wettability with liquid aluminum or their chemical reactivity, which can change the alloy chemistry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. C.J. Simensen and G. Berg: Aluminium, 1980, vol. 56, pp. 335–40.
2. A.B.B. Bomem: Metallographic Evaluation Reports for Prefil, ABB, Bomen Inc., St. Laurent, Quebec, Canada, Jan. 2001.
3. I. Maxwell and A. Hellawell: Metall. Trans., 1972, vol. 3, pp. 1487–93.10.1007/BF02643037 ↗
4. C. Eckert: Modern Casting, 1991, Apr., pp. 28–30.10.1080/03031853.1991.9524227 ↗
5. A. Kelly: Concise Encyclopedia of Composite Materials, Pergamon Press, Oxford, United Kingdom, 1994, pp. 188 and 253.
6. R. Brook: Concise Encyclopedia of Ceramic Materials, Pergamon Press, Oxford, United Kingdom, 1991, p. 393.
7. P. Rohatgi: in Interfaces in Metal-Matrix Composites, A. Dhingra and S. Fishman, eds., AIME-ASM, New Orleans, LA, 1986, pp. 185–202.
8. J.K. Kim and P.K. Rohatgi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1295–1304.10.1007/s11661-000-0124-0 ↗
9. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1986.
10. I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229–37.10.1016/0001-6160(75)90188-1 ↗
11. J.E. Perepezko and S.L. LeBeau: Proc. 2nd Int. Symp. “Al-Transformation Technology and Its Applications”, Buenos Aires, Argentina, Aug. 1981, pp. 309–46.
12. J. Perepezko: Metals Handbook, 9th ed., ASM, Metals Park, OH, 1992, vol. 15, pp. 101–08.
13. W. Khalifa, F. Samuel, and J. Gruzleski: Proc. Int. Symp. “Light Metals 2002”, T. Lewis, ed., TMS-CIM, Montreal, 2002, pp. 285–303.
14. W. Khalifa, F. Samuel, and J. Gruzleski: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 807–25.10.1007/s11661-003-1009-9 ↗
15. W. Khalifa: Ph.D Thesis, Université du Québec à Chicoutimi, Chicoutimi, 2003.
16. P.S. Mohanty, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 103–09.10.1007/BF02648983 ↗
17. J. Hatch: Aluminum: Properties and Physical Metallurgy, ASM, Metals Park, OH, 1984, pp. 17, 140, and 208–09.
18. H. Toshihiro, K. Toshiro, N. Mitsuo, and S. Yuichi: J. Jpn. Inst. Light Met., 1993, vol. 84, pp. 133–34.
19. T. Kobayashi, H. Jim, and M. Niinomi: Mater. Sci. Technol., 1997, vol. 13, pp. 497–502.10.1179/mst.1997.13.6.497 ↗
20. D. Kubaschewski, C. Alcock, and P. Spencer: Materials Thermochemistry, 6th ed., Pergamon Press, Oxford, United Kingdom, 1993.
21. S. El Hadad: Master’s Thesis, University of Quebec at Chicoutimi, Chicoutimi, 2003.
22. L.F. Mondolfo: Aluminium Alloys: Structure and Properties, Butterworth and Co., London, 1976.
23. V.G. Rilvin and G.V. Raynor: Int. Metall. Rev., 1981, vol. 3, pp. 133–52.
24. C. Loper and J. Cho: AFS Trans., 2000, vol. 108, pp. 585–92.
25. G. Jones and J. Pearson: Metall. Trans. B, 1976, vol. 7B, pp. 223–34.10.1007/BF02654921 ↗
26. D. Lee and M. Basaran: in Grain Refinement in Castings and Welds, G. Abbaschain and S. David, eds., TMS-AIME, St. Louis, MO, 1983, pp. 183–95.
27. T. Wang, M. Guo, S. Chen, and C. Liao: Light Metals 1998, B. Welch, ed., TMS, Warrendale, PA, 1998, pp. 969–75.
28. P.S. Mohanty and J.E. Gruzleski: Scripta Metall. Mater., 1994, vol. 31, pp. 179–84.10.1016/0956-716X(94)90171-6 ↗
29. R.C. Dorward: Metall. Trans. A, 1990, vol. 21A, pp. 255–57.10.1007/BF02656443 ↗
30. J. Campbell: Castings, Butterworth-Heinmann, Oxford, UK, 1991, p. 11.
31. A. Mortensen and I. Jin: Int. Mater. Rev., 1992, vol. 37, pp. 101–28.10.1179/imr.1992.37.1.101 ↗
32. D. Uhlmann, B. Chalmers, and K. Jackson: J. Appl. Phys., 1964, vol. 35, pp. 2986–93.10.1063/1.1713142 ↗
33. J. Pötschke and V. Rogge: J. Cryst. Growth, 1989, vol. 94, pp. 726–38.10.1016/0022-0248(89)90097-3 ↗
34. A. Neumann, C.J. Vanoss, and J. Szekely: Kolloid-Z.u.Z., Polymere, 1973, vol. 251, pp. 415–23.10.1007/BF01498688 ↗
35. S. Omenyi and A. Neumann: J. Appl. Phys., 1976, vol. 47, pp. 3956–62.10.1063/1.323217 ↗
36. G. Wilde, M. Byrnes and J. Perepezko: J. Non-Crystalline Solids, 1999, vols. 250–252, pp. 626–31.10.1016/S0022-3093(99)00148-9 ↗
37. Y. Wu, H. Liu, and E. Lavernia: Acta Metall. Mater., 1994, vol. 42, pp. 825–37.10.1016/0956-7151(94)90277-1 ↗
38. J. Cissé, G. Boling, and H. Kerr: J. Cryst. Growth, 1972, vols. 13–14, pp. 777–81.10.1016/0022-0248(72)90558-1 ↗
39. P. Mohanty and J. Gruzleski: Acta Metall. Mater., 1995, vol. 43, pp. 2001–12.10.1016/0956-7151(94)00405-7 ↗
40. I. Jin and D. Lloyd: Proc. Int. Conf. on “Fabrication of Particulate Reinforced Metal Composites”, J. Masounave and F. Hamel, eds., ASM INTERNATIONAL, Materials Park, OH, 1990, pp. 47–52.
41. J. Gruzleski and B. Closset: The Treatment of Liquid Aluminum-Silicon Alloys, The American Foundrymen’s Society Inc., Des Plaines, IL, 1990, pp. 132–37.
42. A. Cibula: J. Inst. Met., 1951, vol. 80, pp. 1–16.
43. G. Sigworth: Scripta Mater., 1996, vol 34, pp. 919–22.10.1016/1359-6462(95)00615-X ↗
44. M. Johnsson, L. Bäckreud, and G. Sigworth: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 481–91.10.1007/BF02657335 ↗
45. K. Kashyap and T. Chandrashekar: Bull. Mater. Sci., Indian Academy of Sciences, Bangalore, India, 2001, vol. 24, pp. 345–53.
46. E. Hondros, M. Seah, S. Hofmann, and P. Lejcek: in Physical Metallurgy, R. Cahn and P. Haasen, eds., North-Holland, Amsterdam, 1996, pp. 1202–89.
47. J. Howe: Int. Mater. Rev., 1993, vol. 38, pp. 233–56.10.1179/imr.1993.38.5.233 ↗
48. P. Hou and G. Ackerman: Appl. Surface Sci., 2001, vol. 178, pp. 156–64.10.1016/S0169-4332(01)00327-0 ↗
49. D. Ragone: Thermodynamics of Materials, John Wiley & Sons Inc., New York, NY, 1995, pp. 116–19.
50. L. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley Publishing Company, Reading MA, 1975, pp. 101–6.
51. L. Bäckreud, P. Gustafson, and M. Johnsson: Aluminium, 1991, vol. 67, pp. 910–15.
52. M. Johnsson: Thermochimica Acta, 1995, vol. 256, pp. 107–21.10.1016/0040-6031(94)02167-M ↗
53. M.E. Glicksman and W.J. Childs: Acta Metall., 1962, vol. 10, pp. 925–33.10.1016/0001-6160(62)90142-6 ↗
54. K. Sohlberg, S.J. Pennycook and S.T. Pantelides: web page, http://www.accelrys.com/cases/ornl.html
55. S. Blonski and S. Garofalini: Surface Sci., 1993, vol. 295, pp. 263–74.10.1016/0039-6028(93)90202-U ↗
56. K. Russell, J. Cornie, and S. Oh: in Interfaces in Metal Matrix Composites, A.K. Dhingra, ed., TMS, Warrendale, PA, 1986, pp. 61–91.
57. P.K. Rohatgi, R. Asthana, and S. Das: Int. Met. Rev., 1986, vol. 31, pp. 115–39.10.1179/imr.1986.31.1.115 ↗