journal article·2014-12

Effects of Cooling Rate on Transformations in a Fe-9 Pct Ni Steel

Richard W. Fonda, George Spanos

Publisher page

Abstract

The transformations of a high-strength 9Ni-Cr-Mo-V steel were characterized as a function of cooling rate by dilatometry, microhardness measurements, and microstructural characterization. The results demonstrate that this steel is extremely insensitive to changes in cooling rate, generating a duplex microstructure of coarse autotempered martensite within a matrix of fine lath martensite at nearly all cooling rates. The coarse autotempered martensite is observed even at very slow cooling rates, although the lath martensite becomes replaced by lath (or bainitic) ferrite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. LG Kvidahl, “An Improved High Yield Strength Steel for Shipbuilding”, Welding Journal, 64(7), 42-48 (1985).
2. TW Montemarano, BP Sack, JP Gudas, MG Vassilaros, and HH Vanderveldt, “High Strength Low Alloy Steels in Naval Construction”, Journal of Ship Production, 2(3), 145-162 (1986).10.5957/jsp.1986.2.3.145 ↗
3. TL Anderson, JA Hyatt, and JC West, “The Benefits of New High-Strength Low-Alloy (HSLA) Steels”, Welding Journal, 66(9), 21-26 (1987).
4. G.B. Olson: in Proceedings of the 34th Sagamore Conference on Innovations in Ultrahigh Strength Steel Technology, vol. 34, G.B. Olson, M. Azrin, and E.S. Wright, eds., 1987, pp. 3–66.
5. EJ Czyryca, DP Kihl, and R DeNale, “Meeting the Challenge of Higher Strength, Lighter Warships”, The AMPTIAC Quarterly, 7(3), 63-70 (2003).
6. PJ Konkol, KM Stefanick, and GS Pike, “New Steel Shows Promise for Navy Ships”, Welding Journal, 90(2), 34-41 (2011).
7. W Jolley, “Effect of Mn and Ni on Impact Properties of Fe and Fe-C Alloys”, JISI, 206, 170-173 (1968).
8. WC Leslie, RJ Sober, SG Babcock, and SJ Green, “Plastic Flow in Binary Substitutional Alloys of BCC Iron – Effects of Strain Rate, Temperature, and Alloy Content”, Trans ASM, 62, 690-710 (1969).
9. GR Speich, DS Dabkowski, and LF Porter, Metallurgical Transactions, 4, 303-315 (1973).10.1007/BF02649630 ↗
10. CD Little and PM Machmeier, “Development of a Weldable High Strength Steel”: Report AFML-TR-75-148, US Air Force Materials Laboratory, Dayton, OH (1975).
11. G. Dynamics: Patent Number 4,076,525, U.S., 1978.
12. P.M. Novotny and J.M. Dahl: The 32nd Mechanical Working and Steel Processing Conference, eds., Iron and Steel Society, 1991, pp. 275–81.
13. Y. Imai, Y. Tobe, K. Moriyama, S. Yano, S. Ueda, and S. Karino: United States Patent No. 4,814,141, March 1989.
14. X.J. Zhang and E.J. Czyryca: Metallurgical Study of NS110B Steel (Part 2): Processing-Structure-Property Relations, NSWCCD -61-TR-2003/06, May, 2003.
15. PL Harrison and RA Farrar, “Application of Continuous Cooling Transformation Diagrams for Welding of Steels,” Int. Mater. Rev. 34(1), 35-51 (1989).10.1179/imr.1989.34.1.35 ↗
16. EA Wilson and SH Chong, “Isothermal Transformations in an Fe-9 Pct Ni Alloy”, Metall Mater Trans A, 33A, 2425-2431 (2002).10.1007/s11661-002-0364-2 ↗
17. Carpenter Technology Corporation AerMet 100 Alloy Technical Datasheet. http://cartech.ides.com/datasheet.aspx?i=103&e=161&c=techart&FMT=PRINT. Accessed 22 Sept 2014.
18. SH Chong, A Sayles, R Keyse, JD Atkinson, and EA Wilson, “Examination of Microstructures and Microanalysis of an Fe-9% Ni Alloy”, Materials Transactions, JIM, 39 (1), 179-188 (1998).10.2320/matertrans1989.39.179 ↗
19. KW Andrews, “Empirical Formulae for the Calculation of Some Transformation Temperatures”, JISI, 203, 721-727 (1965).
20. W Steven and AG Haynes, “The Temperature of Formation of Martensite and Bainite in Low Alloy Steels”, JISI, 183, 349-359 (1956).
21. H.W. Hayden, W.G. Moffatt, and J. Wulff: The Structure and Properties of Materials, vol. III: Mechanical Behavior, John Wiley & Sons, Inc., New York, 1965, p. 11.
22. X.J. Zhang: Unpublished Research; Private Communication, 2004.
23. RA Grange, “Estimating Critical Ranges in Heat Treatment of Steels”, Metal Progress, 70, 73-75, (1961).
24. RW Fonda, G Spanos, and RA Vandermeer, “Observations of Plate Martensite in a Low Carbon Steel”, Scripta Metall, 31, 683-688 (1994).10.1016/0956-716X(94)90210-0 ↗
25. G Spanos, RW Fonda, RA Vandermeer, and A Matuszeski, “Microstructural Changes in HSLA-100 Steel Thermally Cycled to Simulate the Heat Affected Zone During Welding”, Metall. Mater. Trans. A, 26, 3277-3293 (1995).10.1007/BF02669455 ↗
26. DJ Rowenhorst, A Gupta, CR Feng, and G Spanos, “3D Crystallographic and Morphological Analysis of Coarse Martensite: Combining EBSD and Serial Sectioning”, Scripta Mater, 55(1), 11-16 (2006).10.1016/j.scriptamat.2005.12.061 ↗
27. HKDH Bhadeshia, E Keehan, L Karlsson and HO Andren, “Coalesced Bainite”, Transactions of the Indian Institute of Metals, 59, 689-694 (2006).
28. LC Chang and HKDH Bhadeshia, “Microstructure of Lower Bainite formed at Large Undercoolings below Bainite Start Temperature”, Materials Science and Technology, 12, 233-236 (1996).10.1179/mst.1996.12.3.233 ↗
29. E Keehana, L Karlsson, HKDH Bhadeshia, and M Thuvander, “Three-Dimensional Analysis of Coalesced Bainite using Focused Ion Beam Tomography”, Materials Characterization, 59, 877–882 (2008).10.1016/j.matchar.2007.07.011 ↗
30. RW Fonda and G Spanos, “Microstructural Evolution in Ultra-Low Carbon Steel Weldments - Part 1: Controlled Thermal Cycling and CCT Diagram of the Weld Metal”, Metall. Mater. Trans. A, 31A, 2145-2153 (2000).10.1007/s11661-000-0132-0 ↗
31. G. Krauss: Steels: Processing, Structure, and Performance, ASM International, Materials Park, OH, 2005, pp. 82, 343.
32. M Katsumata, O Ishiyama, T Inoue, and T Tanaka, “Microstructure and Mechanical Properties of Bainite Containing Martensite and Retained Austenite in Low Carbon HSLA Steels”, Materials Transactions, JIM, 32(8), 715-728 (1991).10.2320/matertrans1989.32.715 ↗
33. S Zajac, V Schwinn and K-H Tacke, “Characterisation and Quantification of Complex Bainitic Microstructures in High and Ultra-High Strength Linepipe Steels”, Materials Science Forum, 500-501, 387-394 (2005).10.4028/www.scientific.net/MSF.500-501.387 ↗
34. H.I. Aaronson: in The Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience, New York, 1962, pp. 387–546.
35. M. Hillert: in The Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience, New York, 1962, pp. 197–237.
36. T Tanaka, HI Aaronson, M Enomoto, “Calculations of Alpha/Gamma Phase Boundaries in Fe-C-X(1)-X(2) Systems from the Central Atoms Model”, Metall Mater Trans A, 26, 535-545 (1995).10.1007/BF02663904 ↗
37. GB Olson, “Computational design of hierarchically structured materials”, Science 277(5330), 1237-1242 (1997).10.1126/science.277.5330.1237 ↗
38. G Spanos, AB Geltmacher, AC Lewis, JF Bingert, M Mehl, D Papaconstantopoulos, Y Mishin, A Gupta, and P Matic, “A Methodology to Aid in the Design of Naval Steels: Linking First Principles Calculations to Mesoscale Modeling”, Mat Sci Eng A 452-453, 558–568 (2007).10.1016/j.msea.2006.10.110 ↗
39. AC Lewis, K Jordan, and AB Geltmacher, “Determination of Critical Microstructural Features in an Austenitic Stainless Steel using Image-Based Finite Element Modeling” Metall Mater Trans A, 39, 1109-1117 (2008).10.1007/s11661-008-9491-8 ↗
40. J Allison, M Li, C Wolverton, and XM Su, “Virtual aluminum castings: An industrial application of ICME”, JOM, 58, 28-35 (2006).10.1007/s11837-006-0224-4 ↗
41. Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security, The National Academies Press, Washington, DC, 2008.
42. Integrated Computational Materials Engineering (ICME): Integrating ICME in The Automotive, Aerospace, and Maritime Industries, The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2013.
43. M. Li, C. Campbell, K. Thornton, E. Holm, and P. Gumbsch, eds.: Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME), John Wiley & Sons, Inc., Hoboken, NJ, 2013.10.1002/9781118767061 ↗