Diffusion Bonding of Microduplex Stainless Steel and Ti Alloy with and without Interlayer: Interface Microstructure and Strength Properties
Source abstract
Abstract
The interface microstructure and strength properties of solid state diffusion bonding of microduplex stainless steel (MDSS) to Ti alloy (TiA) with and without a Ni alloy (NiA) intermediate material were investigated at 1173 K (900 °C) for 0.9 to 5.4 ks in steps of 0.9 ks in vacuum. The effects of bonding time on the microstructure of the bonded joint have been analyzed by light optical microscopy and scanning electron microscopy in the backscattered mode. In the direct bonded joints of MDSS and TiA, the layer-wise σ phase and the λ + FeTi phase mixture were observed at the bond interface when the joint was processed for 2.7 ks and above holding times. However, when NiA was used as an intermediate material, the results indicated that TiNi3, TiNi, and Ti2Ni are formed at the NiA-TiA interface, and the irregular shaped particles of Fe22Mo20Ni45Ti13 have been observed within the TiNi3 intermetallic layer. The stainless steel-NiA interface is free from intermetallics and the layer of austenitic phase was observed at the stainless steel side. A maximum tensile strength of ~520 MPa, shear strength of ~405 MPa, and impact toughness of ~18 J were obtained for the directly bonded joint when processed for 2.7 ks. However, when nickel base alloy was used as an intermediate material in the same materials, the bond tensile and shear strengths increase to ~640 and ~479 MPa, respectively, and the impact toughness to ~21 J when bonding was processed for 4.5 ks. Fracture surface observations in scanning electron microscopy using energy dispersive spectroscopy demonstrate that in MDSS-TiA joints, failure takes place through the FeTi + λ phase when bonding was processed for 2.7 ks; however, failure takes place through σ phase for the diffusion joints processed for 3.6 ks and above processing times. However, in MDSS-NiA-TiA joints, the fracture takes place through NiTi2 layer at the NiA-TiA interface for all bonding times.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. B. Aleman, I. Gutiérrez and J.J. Urcola: Scr. Mater. 1997, Vol. 36, pp. 509–15.10.1016/S1359-6462(96)00414-9 ↗
2. U. Kamachi Mudali, B.M. Ananda Rao, K. Shanmugam, R. Natarajan and B. Raj: J. Nucl. Mater., 2003, Vol. 321, pp. 40–48.10.1016/S0022-3115(03)00194-6 ↗
3. M.S. Yeh and T.H. Chuang: Scr. Metall. Mater., 1995, Vol. 33, pp. 1277–1281.10.1016/0956-716X(95)00364-2 ↗
4. N. Ozdemir, N. Orhan and M. Aksoy: J. Mater. Proc. Tech., 2003, Vol. 141, pp. 228–233.10.1016/S0924-0136(03)00154-7 ↗
5. N. Özdemir and B. Bilgin: Int. J. Adv. Manuf. Technol., 2009, Vol. 41, pp. 519–26.10.1007/s00170-008-1493-6 ↗
6. Z. Zhonga, T. Hinokib, T. Nozawac, Y. Parkb and H. Kohyamab: J. Alloys. Comp., 2010, Vol. 489, pp. 45–51.
7. O. Torun, A. Karabulut, B. Baksan and I. Çelikyürek: Mater. Des., 2008, Vol. 29, pp. 2043–6.10.1016/j.matdes.2008.04.003 ↗
8. G. Can and M. Kocak: Int. Mater. Rev., 1998, Vol. 43, pp.1-44.10.1179/095066098790093135 ↗
9. B. Kurt, N. Orhan and M. Kaya: Mater. Sci. Technol., 2009, Vol. 25, pp. 556-60.10.1179/174328408X311107 ↗
10. H. Kato, M. Shibata and K. Yoshikawa: Mater. Sci. Technol., 1986, Vol. 2, pp. 405-9.10.1179/026708386790328821 ↗
11. M. Eroglu, T.I. Khan and N. Orhan: Mater. Sci. Technol., 2002, Vol. 18, pp. 68-72.10.1179/026708301125000230 ↗
12. J. G. Lee, S.J. Hong, M.K. Lee and C.K. Rhee: J. Nucl. Mater. 2009, Vol. 395, pp. 145–149.10.1016/j.jnucmat.2009.10.045 ↗
13. R.K. Shiue, S.K. Wu, C.H. Chan and C.S. Huang: Met. Mater. Trans. A, 2006, Vol. 37, pp. 2207–2217.10.1007/BF02586140 ↗
14. A.S. Ramos, M.T. Vieira, J. Morgiel, J. Grzonka, S. Simões and M.F. Vieira: J. Alloys Comp., 2009, Vol. 484, pp. 335–340.10.1016/j.jallcom.2009.04.098 ↗
15. R.K. Shiue, S.K. Wu and J.Y. Shiue: Mater. Sci. Eng. A, 2008, Vol. 488, pp. 186–194.10.1016/j.msea.2007.10.075 ↗
16. P. He, JH.. Zhang, R. Zhou and X. Li: Mater. Charact. 1999, Vol. 43, pp. 287-92.10.1016/S1044-5803(99)00008-X ↗
17. P. He, J.H. Zhang, and X. Li: Mater. Sci. Technol., 2001, Vol. 17, pp. 1158-62.10.1179/026708301101511112 ↗
18. N. Orhan, T.I. Khan and M. Eroglu: Scr. Metar., 2001, Vol. 45, pp. 441-6.10.1016/S1359-6462(01)01041-7 ↗
19. G.B. Kale, R.V. Patil and P.S. Gawde: J. Nucl. Mater., 1998, Vol. 257, pp. 44-50.10.1016/S0022-3115(98)00179-2 ↗
20. S. Kundu and S. Chatterjee: Mater. Sci. Eng. A, 2006, Vol. 425, pp. 107-13.10.1016/j.msea.2006.03.034 ↗
21. X.J. Yuan, G.M. Sheng, B. Qin, W.Z. Huang and B. Zhou: Mater. Charact., 2008, Vol. 59, pp. 930–6.10.1016/j.matchar.2007.08.003 ↗
22. S. Kundu and S. Chatterjee: Mater. Sci. Eng. A, 2008, Vol. 480, pp. 316–22.10.1016/j.msea.2007.07.033 ↗
23. B. Aleman, I. Guitterrez, and J.J. Urcola: Mater. Sci. Technol., 1993, Vol. 9, pp. 633-641.10.1179/026708393790172376 ↗
24. A.A.M. Elrefaey and W. Tillmann: J. Mater. Sci., 2007, Vol. 42, pp. 9553–9558.10.1007/s10853-007-1935-9 ↗
25. A. Changing and J. Zhangpeng: J. Less. Com. Mater., 1990, Vol. 162, pp. 315-322.10.1016/0022-5088(90)90347-M ↗
26. M.F. Islam and N. Ridley: Mater. Sci. Technol., 1996, Vol. 12, pp.623-7.10.1179/026708396790122521 ↗
27. M.T. Salehi, J. Plling, N. Ridley and D.L. Hamilton: Mater. Sci. Eng. A, 1992, Vol. 150, pp. 1-6.10.1016/0921-5093(90)90002-K ↗
28. G.M. Sheng, J.W. Huang, B. Qin, B. Zhou and S.Y. Qiu: J. Mater. Sci., 2005, Vol. 40, pp. 6385-90.10.1007/s10853-005-1629-0 ↗
29. H. Wenbo, Z. Kaifeng and W. Guofeng: J. Mater. Proc. Technol., 2007, Vol. 183, pp. 450–4.10.1016/j.jmatprotec.2006.10.041 ↗
30. B. Bai, H. S. Yang, N. Chen and A. K. Mukherjee: Scr. Mater., 1999, Vol. 40, pp. 1079-1088.10.1016/S1359-6462(98)00476-X ↗
31. J. O. Nilsson: Mater. Sci. Technol., 1992, Vol. 8, pp. 685-699.10.1179/mst.1992.8.8.685 ↗
32. R.M. Millar, T.R. Bieler and S.L.Semiatin: Scr. Mater., 1999, Vol. 40, pp. 1387-1393.10.1016/S1359-6462(99)00061-5 ↗
33. Y. Meahara, Y. Komizo and T. G. Langdon: Mater. Sci. Technol., 1998, Vol. 4, pp. 8-14.
34. R. Pederson: Thesis, Lulea University of Technology. ISSN: 1402-1757.
35. ASTM, Annual Book of ASTM Standards, Philadelphia, PA, 1997; 87–89.
36. M.J. Tan and G.W. Chen: J. Mater. Proc. Technol., 2007, Vol. 192, pp. 434–8.10.1016/j.jmatprotec.2007.04.027 ↗
37. P. Villars, A. Prince and H. Okamoto: Hand book of Ternary Phase Alloys, 2nd edition, Materials Park, OH, ASM International, 1995, 8903–28.
38. S Kundu, S Sam, S Chatterjee: Mater. Sci. Eng. A, 2011, Vol. 528, pp. 4910-4916.10.1016/j.msea.2011.02.050 ↗
39. S. Hinotani and Y. Ohmori: Trans. Japan Inst. Mater., 1988, Vol. 29, pp. 116-24.10.2320/matertrans1960.29.116 ↗
40. N. Orhan, M. Aksoy and M. Eroglu: Mater. Sci. Eng.A, 1999, Vol. 271, pp. 458-68.10.1016/S0921-5093(99)00315-9 ↗
41. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd edition, ASM International, Materials Park, OH: 1996, p. 1735.
42. J. Laeng, Z. Xiu, X. Xu, X. Sun, H. Ru and Y Liu: Phy. Scr., 2007, Vol. T129, pp. 250-54.10.1088/0031-8949/2007/T129/056 ↗
43. A. Laik, P.S. Gawde, K. Bhanumurthy and G.B. Kale: Met. Mater. Trans. A, 2008, Vol. 39, pp. 733–741.10.1007/s11661-007-9457-2 ↗
44. S. Kundu and S. Chatterjee: Mater. Sci. Technol., 2006, Vol. 22, pp.1201-7.10.1179/174328406X118357 ↗