journal article·2015-08

Microheterogeneous Structure of Local Melted Zones in the Process of Explosive Welding

Bella A. Greenberg, Mikhail A. Ivanov, Alexei V. Inozemtsev, Alexander M. Patselov, Mark S. Pushkin, Alisa M. Vlasova

Publisher page

Abstract

The dispersed structures formed in the process of explosive welding and solidification after melting were investigated in areas near the interface. It was shown that melting can be initiated by particles flying away as a result of granulating fragmentation. This is the fastest process during explosive welding, which is similar to fragmentation in conventional explosions with the formation of fragments but occurring in the presence of a barrier. The reaction between the particles and their environment may lead to local heating sufficient for melting. This is confirmed by the observation of numerous particles of the refractory phase within the local melted zones. In the absence of mutual solubility of the initial phases, the solidified local melted zones are to a certain extent analogous to colloidal solutions of immiscible liquids. Correlations between the typical temperatures were obtained that determine the conditions for the formation of various types of colloidal solutions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Thermal and Kinetic Analysis · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. A.A. Deribas: High Pressure Res., 1989, vol. 1, pp. 365-376.10.1080/08957958908202499 ↗
2. J.F. Lancaster: Metallurgy of welding, 6th ed., p. 446, Abington Pub., Abington Cambridge, 1999.10.1533/9781845694869 ↗
3. V.I. Lysak, S.V. Kuzmin: J. Mater. Process. Technol., 2012, vol. 212, pp. 150-156.10.1016/j.jmatprotec.2011.08.017 ↗
4. B.A. Greenberg, M.A. Ivanov, V.V. Rybin, O.A. Elkina, O.V. Antonova, A.M. Patselov, A.V. Inozemtsev, A.V. Plotnikov, A.Yu. Volkova, and Yu.P. Besshaposhnikov: Mater. Charact., 2013, vol. 75, pp. 51–62.10.1016/j.matchar.2012.10.011 ↗
5. B.A. Greenberg, M.A. Ivanov, A.M. Patselov, and Yu.P. Besshaposhnikov: AASRI Procedia, vol. 3d, Elsevier, Oxford, 2012, p. 66.10.1016/j.aasri.2012.11.012 ↗
6. N.F. Mott: Proc. R. Soc. London, Ser. A., 1947, vol. 189, pp. 300-308.10.1098/rspa.1947.0042 ↗
7. D. Grady: Fragmentation of Rings and Shells The Legacy of NF Mott, Springer, Berlin, 2006, p. 376.10.1007/b138675 ↗
8. B.A. Grinberg, M.A. Ivanov, V.V. Rybin, O.A. Elkina, A.M. Patselov, O.V. Antonova, A.V. Inozemtsev, and T.P. Tolmachev: Russ. Metall., 2013, vol. 10, pp. 727–37.10.1134/S0036029513100030 ↗
9. V.V. Rybin, B.A. Grinberg, M.A. Ivanov, S.V. Kuz’min, V.I. Lysak, O.A. Elkina, A.M. Patselov, A.V. Inozemtsev, O.V. Antonova, and V.E. Kozhevnikov: Russ. Metall., 2011, vol. 10, pp. 1008–15.10.1134/S0036029511100107 ↗
10. B.A. Grinberg, M.A. Ivanov, V.V. Rybin, S.V. Kuz’min, V.I. Lysak, O.A. Elkina, A.M. Patselov, O.V. Antonova, A.V. Inozemtsev: Russ. Metall., 2011, vol. 10, pp. 1016–25.10.1134/S0036029511100053 ↗
11. V.V. Rybin, B.A. Greenberg, M.A. Ivanov, A.M. Patselov, O.V. Antonova, O.A. Elkina, A.V. Inozemtsev, and G.A. Salishchev: J. Nanosci. Nanotechnol., 2011, vol. 11, pp. 8885–95.10.1166/jnn.2011.3513 ↗
12. B.A. Greenberg, A.V. Inozemtsev, O.V. Antonova, O.A. Elkina, A.M. Patselov, M.A. Ivanov, V.V. Rybin, S.V. Kuz’min, V.I. Lysak, V.E. Kozhevnikov: Phys. Met. Metall., 2012, vol. 113, pp. 176-189.10.1134/S0031918X12020056 ↗
13. B.A. Greenberg, O.A. Elkina, A.M. Patselov, O.V. Antonova, A.V. Inozemtsev, M.A. Ivanov, V.V. Rybin, G.A. Salishchev, and V.E. Kozhevnikov: Russ. Metall., 2012, vol. 10, pp. 913–20.
14. B.A. Greenberg, O.A. Elkina, A.M. Patselov, A.V. Inozemtsev, A.V. Plotnikov, A.Yu. Volkova, M.A. Ivanov, V.V. Rybin, and Yu.P. Besshaposhnikov: Paton Weld. J., 2012, vol. 9, pp. 12–19.
15. M.S. Pushkin, A.V. Inozemtsev, and B.A. Greenberg: Abstracts of International Conference: Zababakhin Scientific Talks, Snezhinsk, Russia, 2014, p. 223.
16. B. Mandelbrot: The Fractal Geometry of Nature, p. 468, Henry Holt and Company, New York, 1983.
17. J. Feder: Fractals, p. 283, Springer-Verlag, Berlin, 1988.10.1007/978-1-4899-2124-6 ↗
18. K.S. Birdi: Handbook of Surface and Colloid Chemistry, 3d ed., p. 756, Boca Raton: CRC Press, London, 2008.10.1201/9781420007206 ↗
19. B.A. Greenberg, M.A. Ivanov, V.V. Rybin, O.A. Elkina, A.V. Inozemtsev, A.Yu. Volkova, S.V. Kuz’min, and V.I. Lysak: Phys. Met. Metall., 2012, vol. 113, pp. 1099–1110.
20. F. Czerwinski, ed.: Magnesium Alloys-Design, Processing and Properties, In Tech, Rijeka, Croatia, 2011, p. 526.10.5772/560 ↗
21. A.V. Pocius: Adhesion and adhesives technology, 2nd ed., p. 373, Hanser Publishers, Munich, 2002.
22. D. Frey and J. Banker: Proceedings of Corrosion Solutions Conference 2003, Wah Chang, 2003, p. 163.