Hot Tearing Behavior in Double Ternary Eutectic Alloy System: Al-Mg-Si Alloys
Source abstract
Abstract
The hot tearing behavior of the double ternary eutectic alloy system, Al-6Mg-xSi (0 to 6.0 wt pct Si) alloys, was evaluated by a constrained rod casting mold equipped with a thermocouple and a load cell connected to a data acquisition system. Experimental results were compared with the results calculated by Scheil’s model using Pandat software to predict the occurrence of hot tearing in Al-6Mg-xSi alloys. The curve of hot tearing susceptibility contained two peaks, which were mainly affected by the double ternary eutectic reactions and the solidification phases evolution. And it agreed with the Kou’s hot tearing index precisely. The types and fractions of solidification phases (Al3Mg2, Mg2Si, and eutectic Si) determined by the addition of Si content changed the freezing range and eutectic liquid fraction greatly. In addition, the types, fractions, sizes, and distributions of solidification phases affected the nucleation, propagation, and healing of hot tear cracks. The maximum contraction force value decreased as the reduction of volume shrinkage coefficient due to the addition of Si content. The drop-in force value on the contraction force curve could indicate the occurrence of hot tearing, and predict the hot tearing susceptibility when considering the shrinkage coefficient.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. O. Engler, J. Hirsch: Mater. Sci. Eng. A, 2002, vol. 336, pp. 249-262.10.1016/S0921-5093(01)01968-2 ↗
2. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, A. Vieregge: Mater. Sci. Eng. A, 2000, vol. 280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
3. A.H. Musfirah, A.G. Jaharah: J. Appl. Sci. Res., 2012, vol. 8, pp. 4865-75.
4. J. Cui, H.J. Roven: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 2057-63.10.1016/S1003-6326(09)60417-9 ↗
5. M. Tisza and I. Czinege: Int. J. Lightweight Mater. and Manuf., 2018, vol. 1, pp. 229-38.
6. O. Trudonoshyn, O. Prach: Heliyon, 2019, vol. 5, pp. 1-12.10.1016/j.heliyon.2019.e01202 ↗
7. G.B. Burger, A.K. Gupta, P.W. Jeffrey, and D.J. Lloyd: Mater. Charact., 1995, vol. 35, pp. 23-39.10.1016/1044-5803(95)00065-8 ↗
8. S. Ji, F. Yan, and Z. Fan: Mater. Sci. Eng. A, 2014, vol. 626, pp. 165-74.10.1016/j.msea.2014.12.019 ↗
9. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworth, London, 1976.
10. J. Campbell: Castings, Butterworth-Heinemann, Oxford, United Kingdom, 1991.
11. Z. Shi, W.J. Kim, F. Cao, M.S. Dargusch, A. Atrens: J. Magnes. Alloys, 2015, vol. 3, pp. 271-282.10.1016/j.jma.2015.11.006 ↗
12. F. D’Elia, C. Ravindran, D. Sediako: Mater. Sci. Eng. A, 2015, vol. 624, pp. 169-180.10.1016/j.msea.2014.11.057 ↗
13. Eskin DG, Suyitno S, Mooney JF, Katgerman L (2004) Metall Mater Trans A 35A:1325-3510.1007/s11661-004-0307-1 ↗
14. G. Cao, C. Zhang, H. Cao, Y.A. Chang and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 706-16.10.1007/s11661-009-0134-5 ↗
15. J.W. Liu and S. Kou: Acta Mater., 2015, vol. 100, pp. 359-68.10.1016/j.actamat.2015.08.064 ↗
16. J. Vero: Met. Ind., 1936, vol. 48, pp. 431-42.
17. I.I. Novikov: Hot shortness of non-ferrous metals and alloy, Moscow, Nauka, 1966, pp. 299.
18. A.R.E. Singer and P.H. Jennings: J. Inst. Met., 1947, vol. 73, pp. 197-212.
19. W.I. Pumphrey, J.V. Lyons: J. Inst. Met., 1947, vol. 74, pp. 439-55.
20. R.A. Rosenberg, M.C. Flemings, and H.F. Taylor: Trans. AFS, 1960, vol. 68, pp. 518-28.
21. P.H. Jennings, A.R.E. Singer, W.I. Pumphrey: J. Inst. Met., 1947, vol. 74, pp. 227-47.
22. M.A. Easton, H. Wang, J. Grandfield, C.J. Davidson, D.H. Stjohn, L.D. Sweet and M.J. Couper: Metall. and Mater. Trans. A, 2012, vol. 43, pp. 3227-38.10.1007/s11661-012-1132-6 ↗
23. T.W. Clyne, G.J. Davies: Solidification and casting of metals, The Metals Society, London, 1979, pp. 275-78.
24. J.F. Song, F.S. Pan, B. Jiang, A. Atrens, M.X. Zhang, Y. Lu: J. Magnes. Alloy., 2016, vol. 4, pp. 151-72.10.1016/j.jma.2016.08.003 ↗
25. M.O. Pekguleryuz, P. Vermette: Trans. AFS, 2006, vol. 114, pp. 729-36.
26. W.I. Pumphrey, P.H. Jennings: J. Inst. Met., 1948, vol. 75, pp. 235-56.
27. S. Li, D. Apelian: Int. J. Metalcasting, 2011, vol. 11, pp. 23-40.
28. S. Kou: Acta Mater., 2015, vol. 88, pp. 366-374.10.1016/j.actamat.2015.01.034 ↗
29. M. Rappaz, J.M. Drezet and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449-55.10.1007/s11661-999-0334-z ↗
30. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, 1974, pp. 252-56.
31. CompuTherm (2001) Pandat-Phase Diagram Calculation Software Package for Multicomponent Systems. CompuTherm LLC, Madison, WI
32. Vinodh G, Jafari Nodooshan HR, Li DJ, Zeng XQ, Hu B, Carter JT, Sachdev AK (2020) Metall Mater Trans A 51A:1897-191010.1007/s11661-020-05657-9 ↗
33. D. Argo, M. Pekguleryuz, P. Vermette, and M. Lefebvre: Die Casting 2001, Oct. 29–Nov. 1, 2001, Cincinnati, OH, pp. 181–86.
34. Eskin DG, Suyitno S, Katgerman L (2004) Prog Mater Sci 49:629-71110.1016/S0079-6425(03)00037-9 ↗
35. J.W. Liu, S. Kou: Acta Mater., 2016, vol. 110, pp. 84-94.10.1016/j.actamat.2016.03.030 ↗
36. Z. Wang, J.F. Song, Y.D. Huang, A. Srinivasan, Z. Liu, K.U. Kainer, and N. Hort: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2108-18.10.1007/s11661-015-2755-1 ↗
37. Z. Wang, Y.D. Huang, A. Srinivasan, Z. Liu, F. Beckmann, K.U. Kainer and N. Hort: Mater. Des., 2013, vol. 47, pp. 90-100.10.1016/j.matdes.2012.12.044 ↗
38. J.F. Song, Z. Wang, Y.D. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer, and N. Hort: Mater. Des., 2015, vol. 87, pp. 157-70.10.1016/j.matdes.2015.08.026 ↗
39. G. Cao and S. Kou: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3647-63.10.1007/s11661-006-1059-x ↗
40. M.A. Easton, J.F. Grandfield, D.H. StJohn, and B. Rinderer: Mater. Sci. Forum, 2006, vols. 519–521, pp. 1675-80.10.4028/www.scientific.net/MSF.519-521.1675 ↗
41. M. Bassan, B. Buonomo, G. Cavallari, E. Coccia, S. D’Antonio, V. Fafone, L. G. Foggetta, C. Ligi, A. Marini, G. Mazzitelli, G. Modestino, G. Pizzella, L. Quintieri, F. Ronga and P. Valente: Int. J. Mod. Phys. B, 2012, vol. 27, pp. 1491-77.
42. Z.S. Zhen, N. Hort, Y.D. Huang, N. Petri, O. Utke and K.U. Kainer: Mater. Sci. Forum., 2009, vols. 618-619, pp. 533-40.10.4028/www.scientific.net/MSF.618-619.533 ↗