Solidification Microstructure, Segregation, and Shrinkage of Fe-Mn-C Twinning-Induced Plasticity Steel by Simulation and Experiment
Source abstract
Abstract
A 3D cellular automaton finite element model with full coupling of heat, flow, and solute transfer incorporating solidification grain nucleation and growth was developed for a multicomponent system. The predicted solidification process, shrinkage porosity, macrosegregation, grain orientation, and microstructure evolution of Fe-22Mn-0.7C twinning-induced plasticity (TWIP) steel match well with the experimental observation and measurement. Based on a new solute microsegregation model using the finite difference method, the thermophysical parameters including solid fraction, thermal conductivity, density, and enthalpy were predicted and compared with the results from thermodynamics and experiment. The effects of flow and solute transfer in the liquid phase on the solidification microstructure of Fe-22Mn-0.7C TWIP steel were compared numerically. Thermal convection decreases the temperature gradient in the liquid steel, leading to the enlargement of the equiaxed zone. Solute enrichment in front of the solid/liquid interface weakens the thermal convection, resulting in a little postponement of columnar-to-equiaxed transition (CET). The CET behavior of Fe-Mn-C TWIP steel during solidification was fully described and mathematically quantized by grain morphology statistics for the first time. A new methodology to figure out the CET location by linear regression of grain mean size with least-squares arithmetic was established, by which a composition design strategy for Fe-Mn-C TWIP steel according to solidification microstructure, matrix compactness, and homogeneity was developed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. O. Grässel and G. Frommeyer: Mater. Sci. Technol., 1998, vol. 14 (12), pp. 1213–17.10.1179/mst.1998.14.12.1213 ↗
2. O. Grässel, L. Krüger, G. Frommeyer et al.: Int. J. Plast., 2000, 16 (10), pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
3. U. Brüx, G. Frommeyer, O. Grässel et al.: Steel Res., 2002, vol. 73 (13), pp. 294–98.10.1002/srin.200200211 ↗
4. G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43 (3), pp. 438–46.10.2355/isijinternational.43.438 ↗
5. S. Vercammen, B. Blanpain, B.C. De Cooman et al.: Acta Mater., 2004, vol. 52 (7), pp. 2005–12.10.1016/j.actamat.2003.12.040 ↗
6. S. Vercammen, B.C. De Cooman, and N. Akdut: Steel Res. Int., 2003, vol. 74 (6), pp. 370–75.10.1002/srin.200300200 ↗
7. A.A. Saleh, E.V. Pereloma, and A.A. Gazder: Mater. Sci. Eng. A, 2011, vol. 528 (13–14), pp. 4537–49.10.1016/j.msea.2011.02.055 ↗
8. D.B. Santos, A.A. Saleh, A.A. Gazder et al.: Mater. Sci. Eng. A, 2011, vol. 528 (13–14), 3545–55.10.1016/j.msea.2011.01.052 ↗
9. Z. Mi, D. Tang, L. Yan et al.: J. Mater. Sci. Technol., 2005, vol. 21 (4), pp. 451–54.10.1179/174328405X36593 ↗
10. K. Phiu-on, W. Bleck, A. Schwedt et al.: Steel Res. Int., 2009, vol. 80 (1), pp. 29–38.
11. M. Eskandari, A. Zarei-Hanzaki, and A. Marandi: Mater. Des., 2012, vol. 39, pp. 279–84.10.1016/j.matdes.2012.02.047 ↗
12. M. Ha, W.S. Kim, H.K. Moon et al.: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1087–98.10.1007/s11661-008-9496-3 ↗
13. K.H. Spitzer, F. Ruppel, R. Viscorova et al. (2003) Steel Res. Int., 74 (11–12):724–31.10.1002/srin.200300256 ↗
14. Y.N. Dastur and W.C. Leslie: Metall. Trans. A, 1981, vol. 12, pp. 749–59.10.1007/BF02648339 ↗
15. B.K. Zuidema, D.K. Subramanyam, and W.C. Leslie: Metall. Trans. A, 1987, vol. 8A, pp. 1629–39.10.1007/BF02646146 ↗
16. I. Karaman, H. Sehitoglu, K. Gall et al.: Acta Mater., 2000, vol. 48 (6), pp. 1345–59.10.1016/S1359-6454(99)00383-3 ↗
17. C. Scott, S. Allain, M. Faral et al.: Rev. Métall., 2006, vol. 103, no. 6, pp. 293–302.10.1051/metal:2006142 ↗
18. Y.G. Kim, J.K. Han, and E.W. Lee: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 2097–98.10.1007/BF02645012 ↗
19. Y.G. Kim and C.Y. Lim: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 1625–26.10.1007/BF02674039 ↗
20. Y.G. Kim, Y.S. Park, and J.K. Han: Metall. Mater. Trans. A, 1985, vol. 16A, pp. 1689–93.10.1007/BF02663026 ↗
21. J.M. Han and Y.G. Kim: J. Mater. Sci. Lett., 1989, vol. 8 (5), pp. 599–601.10.1007/BF00720311 ↗
22. K.H. Hwang, W.S. Yang, T.B. Wu et al.: Acta Metall. Mater., 1991, vol. 39 (5), pp. 825–31.10.1016/0956-7151(91)90282-6 ↗
23. K.H. Hwang, C.M. Wan, and J.G. Byrne: Mater. Sci. Eng. A, 1991, vol. 132, pp. 161–69.10.1016/0921-5093(91)90372-T ↗
24. T. Shun, C.M. Wan, and J.G. Byrne: Acta Metall. Mater., 1992, vol. 40 (12), pp. 3407–12.10.1016/0956-7151(92)90054-I ↗
25. O. Bouaziz and N. Guelton: Mater. Sci. Eng. A, 2001, vol. 319, pp. 246–49.10.1016/S0921-5093(00)02019-0 ↗
26. A. Dumay, J.P. Chateau, S. Allain et al.: Mater. Sci. Eng. A, 2008, vol. 483, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
27. S. Allain, J.P. Chateau and O. Bouaziz: Mater. Sci. Eng. A, 2004, vol. 387, pp. 143–47.10.1016/j.msea.2004.01.060 ↗
28. S. Allain, J.P. Chateau, D. Dahmoun et al.: Mater. Sci. Eng. A, 2004, vol. 387, pp. 272–76.10.1016/j.msea.2004.05.038 ↗
29. L. Bracke, K. Verbeken, L. Kestens et al.: Acta Mater., 2009, vol. 57 (5), pp. 1512–24.10.1016/j.actamat.2008.11.036 ↗
30. L. Bracke, L. Kestens, and J. Penning: Scripta Mater., 2009, vol. 61 (2), pp. 220–22.10.1016/j.scriptamat.2009.03.045 ↗
31. R. Ueji, N. Tsuchida, D. Terada et al.: Scripta Mater., 2008, vol. 59 (9), pp. 963–66.10.1016/j.scriptamat.2008.06.050 ↗
32. J.D. Yoo, S.W. Hwang, and K.T. Park: Mater. Sci. Eng. A, 2009, vol. 508 (1), pp. 234–40.10.1016/j.msea.2008.12.055 ↗
33. J.E. Jin and Y.K. Lee: Mater. Sci. Eng. A, 2009, vol. 527 (1), pp. 157–61.10.1016/j.msea.2009.08.028 ↗
34. M. Koyama, T. Sawaguchi, and K. Tsuzaki: ISIJ Int., 2012, vol. 52 (1), pp. 161–63.10.2355/isijinternational.52.161 ↗
35. M. Koyama, T. Sawaguchi, and K. Tsuzaki: ISIJ Int., 2013, vol. 53 (2), pp. 323–29.10.2355/isijinternational.53.323 ↗
36. S.C. Mittal, R.C. Prasad, and M.B. Deshmukh: ISIJ Int., 1995, vol. 35 (3), pp. 302–08.10.2355/isijinternational.35.302 ↗
37. R.T. Van Tol, L. Zhao, H. Schut et al.: Mater. Sci. Technol., 2012, vol. 28 (3), pp. 348–53.10.1179/1743284711Y.0000000045 ↗
38. K.H. So, J.S. Kim, Y.S. Chun et al.: ISIJ Int., 2009, vol. 49 (12), pp. 1952–59.10.2355/isijinternational.49.1952 ↗
39. M. Koyama, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2012, vol. 54, pp. 1–4.10.1016/j.corsci.2011.09.022 ↗
40. M. Koyama, E. Akiyama, T. Sawaguchi et al.: Scripta Mater., 2012, vol. 66 (7), pp. 459–62.10.1016/j.scriptamat.2011.12.015 ↗
41. M. Koyama, E. Akiyama, and K. Tsuzaki: Scripta Mater., 2012, vol. 66 (11), pp. 947–50.10.1016/j.scriptamat.2012.02.040 ↗
42. S.H. Wang, Z.Y. Liu, W.N. Zhang et al.: ISIJ Int., 2009, vol. 49 (9), pp. 1340–46.10.2355/isijinternational.49.1340 ↗
43. M. Daamen, B. Wietbrock, S. Richter et al.: Steel Res. Int., 2011, vol. 82 (1), pp. 70–75.10.1002/srin.201000267 ↗
44. Y. Saito, G. Goldbeck-Wood, and H. Müller-Krumbhaar: Phys. Rev. A, 1988, vol. 38 (4), pp. 2148–53.10.1103/PhysRevA.38.2148 ↗
45. D. Juric and G. Tryggvason: J. Comput. Phys., 1996, vol. 123 (1), pp. 127–48.10.1006/jcph.1996.0011 ↗
46. G. Caginalp and P. Fife: Phys. Rev. B, 1986, vol. 33 (11), pp. 7792–94.10.1103/PhysRevB.33.7792 ↗
47. R. Kobayashi: Phys. D, 1993, vol. 63 (3), pp. 410–23.10.1016/0167-2789(93)90120-P ↗
48. J.A. Spittle and S.G. Brown: Acta Metall., 1989, vol. 37 (7), pp. 1803–10.10.1016/0001-6160(89)90065-5 ↗
49. P.P. Zhu and R.W. Smith: Acta Metall., 1992, vol. 40 (4), pp. 683–92.10.1016/0956-7151(92)90009-4 ↗
50. C.A. Gandin and M. Rappaz: Acta Metall., 1994, vol. 42 (7), pp. 2233–46.10.1016/0956-7151(94)90302-6 ↗
51. C.A. Gandin, J.L. Desbiolles, M. Rappaz et al.: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3153–65.10.1007/s11661-999-0226-2 ↗
52. L. Nastac and D.M. Stefanescu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 4061–74.10.1007/BF02595655 ↗
53. L. Nastac and D.M. Stefanescu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 4075–83.10.1007/BF02595656 ↗
54. M. Yamazaki, Y. Natsume, H. Harada et al.: ISIJ Int., 2006, vol. 46 (6), pp. 903–08.10.2355/isijinternational.46.903 ↗
55. J. Wang, F. Wang, C. Li et al.: ISIJ Int., 2010, vol. 50 (2), pp. 222–30.10.2355/isijinternational.50.222 ↗
56. C. Jing, Z. Xu, Y. Wang et al.: China Foundry, 2012, vol. 9 (1), pp. 53–59.
57. Z. Hou, F. Jiang, and G. Cheng: ISIJ Int., 2012, vol. 52 (7), pp. 1301–09.10.2355/isijinternational.52.1301 ↗
58. P. Lan, L. Song, C. Du et al.: Mater. Sci. Technol., 2014, vol. 30 (11), pp. 1297–1304.10.1179/1743284714Y.0000000560 ↗
59. D. Djurovic, B. Hallstedt, J. von Appen et al.: Calphad, 2011, vol. 35 (4), pp. 479–91.10.1016/j.calphad.2011.08.002 ↗
60. W. Huang: Metall. Trans. A, 1990, vol. 21A, pp. 2115–23.10.1007/BF02647870 ↗
61. H. Qian, P. Lan, J. Zhang et al.: Special Steel, 2010, vol. 31 (2), pp. 25–28 (in Chinese)
62. G. Engstrom, H. Fredriksson, and B. Rogberg: Scand. J. Metall., 1983, vol. 12 (1), pp. 3–12.
63. K. Harste: Ph.D. Dissertation, Technical University of Clausthal, Clausthal-Zellerfeld, 1989.
64. A. Jablonka, K. Harste, and K. Schwerdtfeger: Steel Res., 1991, vol. 62 (1), pp. 24–33.10.1002/srin.199101722 ↗
65. H. Mizukami, A. Yamanaka, and T. Watanabe: ISIJ Int., 2002, vol. 42 (4), pp. 375–84.10.2355/isijinternational.42.375 ↗
66. P. Lan and J. Zhang: Steel Res. Int., 2016, vol. 87 (2), pp. 250–61.10.1002/srin.201500022 ↗
67. L. Yang: Master Thesis, University of Science and Technology Beijing, Beijing, 2012.
68. J. Yang, Y.N. Wang, X.M. Ruan et al.: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 1365–75.10.1007/s11663-015-0330-1 ↗
69. P. Lan and J. Zhang: Ironmaking and Steelmaking, 2014, vol. 41 (8), pp. 598–606.10.1179/1743281213Y.0000000172 ↗
70. P. Lan, H. Sun, Y. Li, et al. (2014) J. Univ. Sci. Technol. Beijing, 36(3):315–22
71. J. Miettinen: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 365–79.10.1007/s11663-000-0055-6 ↗
72. I. Hitoshi, N. Yukinobu, and O. Kenichi: ISIJ Int., 2008, vol. 48 (12), pp. 1728–33.10.2355/isijinternational.48.1728 ↗
73. C. Jing, X. Wang, M. Jiang et al.: Steel Res Int., 2011, vol. 82 (10), pp. 1173–79.10.1002/srin.201000303 ↗
74. L. Bai, H. Liu, Y. Zhang et al. (2011) J. Univ. Sci. Technol. Beijing 33(9):1091–98
75. J. Wang, F. Wang, Y. Zhao et al.: Int. J. Min. Metall. Mater., 2009, vol. 16 (6), pp. 640–45.
76. M.C. Schneider and C. Beckermann: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2373–88.10.1007/BF02671251 ↗
77. Y. Meng and B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 685–705.10.1007/s11663-003-0040-y ↗
78. M. Rappaz and C.A. Gandin: Acta Metall., 1993, vol. 41(2), pp. 345–60.10.1016/0956-7151(93)90065-Z ↗
79. C. Pequet, M. Rappaz, and M. Gremaud: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2095–2106.10.1007/s11661-002-0041-5 ↗
80. ProCAST User Manual, ESI group. The virtual try-out space company, 2011.
81. E. Scheil: Z. Metallkd., 1942, vol. 34 (3), pp. 70–72.
82. P. Lan, Y. Li, J. Zhang et al.: EPD Congress TMS2012, John Wiley & Sons, Inc., New York, NY, 2012, pp. 71–78.10.1002/9781118359341.ch8 ↗
83. P. Lan and J. Zhang: Mater. Des., 2014, vol. 53, pp. 822–29.10.1016/j.matdes.2013.07.077 ↗
84. P. Lan and J. Zhang: Mater. Des., 2014, vol. 54, pp. 112–24.10.1016/j.matdes.2013.08.031 ↗
85. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65 (1), pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
86. S.C. Flood and J.D. Hunt: J Cryst. Growth, 1987, vol. 82 (3), pp. 552–60.10.1016/0022-0248(87)90347-2 ↗
87. Z. Hou, G. Cheng, F. Jiang et al.: ISIJ Int., 2013, vol. 53 (4), pp. 655–64.10.2355/isijinternational.53.655 ↗
88. C. Wang, H. Gao, Y. Dai et al.: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1616–20.10.1007/s11661-010-0228-0 ↗
89. S. Tsuchiya, M. Ohno, and K. Matsuura: Acta Mater., 2012, vol. 60 (6), pp. 2927–38.10.1016/j.actamat.2012.01.056 ↗
90. M. Ohno, M. Maruyama, and K. Matsuura: Metall. Mater. Trans. A, 2015, vol. 46 (11), pp. 5240–47.10.1007/s11661-015-3115-x ↗
91. S.K. Choudhary and A. Ghosh: ISIJ Int., 1994, vol. 34 (4), pp. 338–45.10.2355/isijinternational.34.338 ↗
92. M.R. Bridge and G.D. Rogers: Metall. Trans. B, 1984, vol. 15B, pp. 581–89.10.1007/BF02657390 ↗
93. K.A. Jackson, J.D. Hunt, D.R. Uhlmann et al.: Trans. AIME, 1966, vol. 236 (2), pp. 149–58
94. Q. Han, H. Hu (1989) Acta Metall. Sinica Engl. Ed. B 2 (2):94–98.
95. H. Xu, L.D. Xu, S.J. Zhang et al.: Scripta Mater., 2006, vol. 54 (12), pp. 2191–96.10.1016/j.scriptamat.2006.02.035 ↗
96. Y. Shan, X. Luo, X. Hu et al.: J. Mater. Sci. Technol., 2011, vol. 27 (4), pp. 352–58.10.1016/S1005-0302(11)60073-X ↗
97. M. El-Bealy and B.G. Thomas: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 689–93.10.1007/BF02915668 ↗
98. H. Jacobi and K. Schwerdtfeger: Metall. Trans. A, 1976, vol. 7A, pp. 811–20.10.1007/BF02644078 ↗
99. H. Mizukami, K. Hayashi, M. Numata et al.: ISIJ Int., 2012, vol. 52 (12), pp. 2235–44.10.2355/isijinternational.52.2235 ↗
100. S. Tsuchiya, M. Ohno, and K. Matsuura: Acta Mater., 2012, vol. 60 (6), pp. 2927–38.10.1016/j.actamat.2012.01.056 ↗