The Influence of Heat Treatment on the Microstructure and Machinability of a Prehardened Mold Steel
Source abstract
Abstract
© 2015, The Minerals, Metals & Materials Society and ASM International. The machinability performance of a modified AISI P20 steel, heat treated to have the same hardness but three different microstructures, lower bainite, tempered martensite, and primary spheroidized carbides in a tempered martensite matrix, was studied. The microstructures were characterized using light optical and scanning electron microscopy and X-ray diffraction, and mechanical properties were compared by means of tensile and Charpy V-notch impact tests. The influence of microstructure and the resultant mechanical properties on machinability was studied in the context of single tooth end milling operation. The results showed that the material containing primary spheroidized carbides exhibited a superior machinability at the expense of a marginal loss of tensile strength and impact toughness, with comparable yield strength to that of the material containing tempered martensite. By contrast, the material with bainitic microstructure showed the lowest yield strength and the poorest machinability performance while having the highest uniform elongation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. F. Hippenstiel, ed.: Handbook of Plastic Mould Steels, Edelstahlwerke Buderus AG, 2004.
2. R.A. Mesquita and C.A. Barbosa: in 18th International Congress of Mechanical Engineering, Ourto Preto, MG, 2005.
3. F.B. Pickering: in Tool Materials for Molds and Dies, G. Krauss, and H. Nordberg, eds., Colorado School of Mines: St. Charles, Illinois, 1987, pp 3–29.
4. H. Hoseiny, B. Högman, U. Klement and A. Kinnander: Int. J. Mach. Mach. Mater., 2012, vol. 11, pp. 327-341.
5. M.E. Finn: Machining, In ASM Handbook, ASM International, Ohio, 1989, pp. 708–32.
6. H. Hoseiny, B. Högman, H.-O. Andrén, U. Klement, J.-E. Ståhl, A. Thuvander: Int. J. Mater. Res., 2013, vol. 104, pp. 748-761.10.3139/146.110926 ↗
7. H. Chandrasekaran and R. M’Saoubi: CIRP Ann. – Manuf. Technol., 2006, vol. 55, pp. 93–96.10.1016/S0007-8506(07)60374-6 ↗
8. D. Firrao, R. Gerosa, A. Ghidini, P. Matteis, G. Mortarino, M. R. Pinasco, B. Rivolta, G. Silva and E. Stagno: Int. J. Fatigue, 2007, vol. 29, pp. 1880-1884.10.1016/j.ijfatigue.2007.01.015 ↗
9. H. Hoseiny, U. Klement, P. Sotskovszki and J. Andersson: Mater. Des. 2011, vol. 32, pp. 21-28.10.1016/j.matdes.2010.06.045 ↗
10. M.-Y. Tu, Ch.-A. Hsu, W.-H. Wang and Y.-F. Hsu: Mater. Chem. Phys. 2008, vol. 107, pp. 418-425.10.1016/j.matchemphys.2007.08.017 ↗
11. Ch. R. Brooks: Principles of the heat treatment of plain carbon and low alloy steels,,ASM International, OH, United States of America, 1996, pp. 237-242.10.31399/asm.tb.phtpclas.9781627083539 ↗
12. H.K.D.H. Bhadeshia: in Proceedings of the International Seminar on Welding of High Strength Pipeline Steels, Araxa, Brazil, 2011, pp. 99–106.
13. H. K. D. H. Bhadeshia: Bainite in Steel: Transformations, Microstructures and Properties. 2nd ed., The Institute of Materials, London, 2001.
14. D. Kalish, S. A. Kulin and M. Cohen: J. Met., 1965, pp. 157-164.
15. B. P. J. Sandvik and H. P. Nevalainen: Met. Technol., 1981, pp. 213-220.10.1179/030716981803275992 ↗
16. G. V. S. S. Prasad, M. Goerdeler and G. Gottstein: Mater. Sci. Eng. A, 2005, vol. 400-401, pp. 231-233.10.1016/j.msea.2005.03.061 ↗
17. M. Goerdeler, M. Crumbach, M. Schneider, G. Gottstein, L. Neumann, H. Aretz and P. Kopp: Mater. Sci. Eng. A, 2004, vol. 387-389, pp. 266-271.10.1016/j.msea.2003.12.086 ↗
18. J. Daigne, M. Guttmann and J. P. Naylor: Mater. Sci. Eng., 1982, vol. 56, pp. 1-10.10.1016/0025-5416(82)90176-8 ↗
19. E. Chang, C. Y. Chang and C. D. Liu: Metall. Mater. Trans. A, 1994, vol. 25, pp. 545-555.10.1007/BF02651596 ↗
20. J.R. Davis, ed.: Metals Handbook Desk Edition, ASM International, Materials Park, 2004.
21. A. Ohmori, Sh. Torizuka and K. Nagai: ISIJ Int., 2004, vol. 44, pp. 1063-1071.10.2355/isijinternational.44.1063 ↗
22. C. García-Mateo and F. G. Caballero: Mater. Trans., JIM, 2005, vol. 46, pp. 1839-1846.10.2320/matertrans.46.1839 ↗
23. F. G. Caballero, J. Chao, J. Cornide, C. García-Mateo, M. J. Santofimia and C. Capdevila: Mater. Sci. Eng. A, 2009, vol. 525, pp. 87-95.10.1016/j.msea.2009.06.034 ↗
24. J. H. Hollomon, L. D. Jaffe, D. E. McCarthy and M. R. Norton: Trans. ASM, 1947, vol. 38, pp. 807-847.
25. S. A. Herres and C. H. Lorig: Trans. ASM, 1948, vol. 40, pp. 775-812.
26. G. Sachs, L. J. Ebert and W. F. Brown: Trans. AIME, 1948, vol. 176, pp. 424-435.
27. E. S. Davenport, E. L. Roff and E. C. Bain: Trans. ASM, 1934, vol. 22, pp. 289-310.
28. Y. H. Liu: Trans. ASM, 1969, vol. 62, pp. 55-63.
29. N. A. Abukhshim, P. T. Mativenga and M. A. Sheikh: Int. J. Mach. Tool. Manuf., 2006, vol. 46, pp. 782-800.10.1016/j.ijmachtools.2005.07.024 ↗
30. M. Bäker: J. Mater. Process. Technol., 2006, vol. 176, pp. 117-126.10.1016/j.jmatprotec.2006.02.019 ↗
31. W. F. Hosford: Mechanical Behaviour of Materials. 2nd ed., Cambridge University Press, Cambridge, 2010.
32. E. M. Trent and P. K. Wright: Metal Cutting. 4th ed., Butterworth-Heinemann, Boston, 2000.
33. T. Childs, K. Maekawa, T. Obikawa and Y. Yamane: Metal Machining, Theory and Applications. Arnold, London, 2000.
34. W. König and K. Essel: Verlag Stahleisen M.B.H., Düsseldorf, 1973.
35. S. P. F. C. Jaspers and J. H. Dautzenburg: J. Mater. Process. Technol. 2002, vol. 121, pp. 123-135.10.1016/S0924-0136(01)01227-4 ↗
36. J.-E. Ståhl: Metal Cutting-Theory and Models, Lund University, Lund, 2008.