High-Temperature Creep Deformation and Fracture Behavior of a Directionally Solidified Ni-Base Superalloy DZ951
Source abstract
Abstract
The high-temperature creep deformation and fracture behavior of a directionally solidified Ni-base superalloy DZ951 have been investigated over a wide stress range of 110 to 880 MPa at high temperatures (700 degrees C to 1000 degrees C). In this article, the detailed creep deformation and fracture mechanism have been studied. The results show that the creep curves exhibit strong temperature dependence. From transmission election microscopy (TEM) observations, it is suggested that the deformation mechanism is temperature dependent and mainly consists of three dislocation-controlling mechanisms: stacking faults and dislocation-pair shearing, dislocation bowing, and dislocation climbing. It is found that the fracture mode of DZ951 alloy changes from cleavagelike fracture at low temperature to ductile fracture at high temperature. At 700 degrees C, the creep cracks mainly initiate at the surface and propagate along the cleavagelike facets. With increasing temperature, cracks can initiate at the surface, carbide/matrix interface, and cast pore. The growth of microcrack has a direction perpendicular to the stress direction. The creep-rupture data follow the Monkman-Grant relationship in different temperature regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. F.L. VerSynder and R.W. Guard: Trans. ASM, 1960, vol. 32, pp. 485–93.
2. F.L. VerSynder and M.E. Shank: Mater. Sci. Eng., 1970, vol. 6, pp. 213–47.10.1016/0025-5416(70)90050-9 ↗
3. M. McLean: Directionally Solidified Materials for High Temperature Service, TMS, London, 1983, pp. 180–89.
4. D.N. Duhl: in Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds., John Wiley and Sons, New York, NY, 1987, pp. 189–92.
5. F.R.N. Nabarro and H.L. de Villiers: The Physics of Creep, Taylor and Francis, London, 1995, pp. 83–97.
6. L.R. Liu, T. Jin, N.R. Zhao, Z.H. Wang, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2003, vol. 361, pp. 191–97.10.1016/S0921-5093(03)00517-3 ↗
7. L.R. Liu, T. Jin, N.R. Zhao, Z.H. Wang, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2004, vol. 385, pp. 105–12.10.1016/j.msea.2004.06.003 ↗
8. Q.Z. Chen, C.N. Jones, and D.M. Knowles: Mater. Sci. Eng. A, 2004, vol. 385, pp. 402–18.10.1016/S0921-5093(04)00905-0 ↗
9. X.B. Liu, B. Kang, W. Carpenter, and E. Barbero: J. Mater. Sci., 2004, vol. 39, pp. 1967–73.10.1023/B:JMSC.0000017758.91184.ac ↗
10. U. Krupp, R. Orosz, H.J. Christ, U. Buschmann, and W. Wiechert: Mater. Sci. Forum, 2004, vols. 461–464, pp. 37–43.10.4028/www.scientific.net/MSF.461-464.37 ↗
11. A. Jacques and P. Bastie: Phil. Mag., 2003, vol. 83, pp. 3005–27.10.1080/1478643031000149108 ↗
12. R.C. Reed, N. Matan, D.C. Cox, M.A. Rist, and C.M.F. Rae: Acta Mater., 1999, vol. 47, pp. 3367–81.10.1016/S1359-6454(99)00217-7 ↗
13. M. Kolbe, K. Neuking, and G. Eggeler: Mater. Sci. Eng. A, 1997, vol. 234, pp. 877–79.10.1016/S0921-5093(97)00366-3 ↗
14. M. Kolbe, A. Dlouhy, and G. Eggeler: Mater. Sci. Eng. A, 1998, vol. 246, pp. 133–42.10.1016/S0921-5093(97)00733-8 ↗
15. V. Sass and M. Feller-Kniepmeier: Mater. Sci. Eng. A, 1998, vol. 245, pp. 19–28.10.1016/S0921-5093(97)00709-0 ↗
16. S. Nategh and S.A. Sajjadi: Mater. Sci. Eng. A, 2003, vol. 339, pp. 103–08.10.1016/S0921-5093(02)00125-9 ↗
17. A.C. Picasso, A.J. Marzocca, and I. Alvarez: Mater. Sci. Eng. A, 1997, vol. 234, pp. 1099–1102.10.1016/S0921-5093(97)00352-3 ↗
18. R. Srinicasan, G.F. Eggeler, and M.J. Mills: Acta Mater., 2000, vol. 48, pp. 4867–78.10.1016/S1359-6454(00)00292-5 ↗
19. T. Tong, S. Dalby, J. Byrne, M.B. Henderson, and M.C. Hardy: Int. J. Fatigue, 2001, vol. 23, pp. 897–902.10.1016/S0142-1123(01)00049-4 ↗
20. M. Okazaki and Y. Yamazaki: Int. J. Fatigue, 1999, vol. 21, pp. 79–86.10.1016/S0142-1123(99)00058-4 ↗
21. Z.K. Chu, J.J. Yu, X.F. Sun, N.R. Zhao, H.R. Guan, and Z.Q. Hu: Trans. Nonferrous Metall. Soc. China, 2006, vol. 16, pp. 1949–52.
22. P.C. Xia, J.J. Yu, X.F. Sun, H.R. Guan, and Z.Q. Hu: J. Alloys Compd., 2006, vol. 443, pp. 125–31.10.1016/j.jallcom.2006.09.123 ↗
23. J.H. Gittus: Creep Viscoelasticity and Creep Fracture in Solids, Applied Science, London, 1975, pp. 473–79.
24. S.A. Sajjadi and S. Nategh: Mater. Sci. Eng. A, 2001, vol. 307, pp. 158–64.10.1016/S0921-5093(00)01822-0 ↗
25. L.Z. He, Q. Zheng, X. F. Sun, H.R. Guan, Z.Q. Hu, A.K. Tieu, C. Lu, and H.T. Zhu: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2385–91.10.1007/s11661-005-0111-6 ↗
26. F.C. Monkman and N.J. Grant: Proc. ASTM, 1956, vol. 56, pp. 593–620.
27. A.K. Koul, R. Castillo, and K. Willett: Mater. Sci. Eng., 1984, vol. 66, pp. 213–26.10.1016/0025-5416(84)90182-4 ↗
28. S.A. Sajjadi, S. Nategh, and R.I.L. Guthrie: Mater. Sci. Eng. A, 2002, vol. 325, pp. 484–89.10.1016/S0921-5093(01)01709-9 ↗
29. G.L. Erickson, K. Harris, and R.E. Schwer: TMS-AIME Meeting, Houston, TX, Mar. 1985, pp. 1–10.
30. T. Link and M. Feller-Kniepmeier: Metall. Trans. A, 1992, vol. 23A, pp. 99–105.10.1007/BF02660857 ↗
31. B.H. Kear, J.M. Oblak, and A.F. Giamei: Metall. Trans., 1970, vol. 1, pp. 2477–86.10.1007/BF03038373 ↗
32. P.R. Bhowal, E.F. Wright, and E.L. Raymond: Metall. Trans. A, 1990, vol. 21A, pp. 1709–17.10.1007/BF02672587 ↗
33. B.A. Lerch and V. Gerold: Acta Metall., 1985, vol. 33, pp. 1709–16.10.1016/0001-6160(85)90165-8 ↗
34. B.A. Lerch and V. Gerold: Metall. Trans. A, 1987, vol. 18A, pp. 2135–41.10.1007/BF02647085 ↗
35. S.G. Tian, J.H. Zhang, H.C. Yang, Y.B. Xu, and Z.Q. Hu: Mater. Sci. Eng. A, 1999, vol. 262, pp. 271–78.10.1016/S0921-5093(98)00990-3 ↗
36. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 42, pp. 1–30.10.1016/0956-7151(92)90195-K ↗
37. T.P. Gabb, S.L. Draper, D.R. Hull, R.A. Mackay, and M.V. Nathal: Mater. Sci. Eng. A, 1989, vol. 118, pp. 59–69.10.1016/0921-5093(89)90058-0 ↗
38. J.T. Guo, D. Ranucci, E. Picco, and P.M. Strocchi: Metall. Trans. A, 1983, vol. 14A, pp. 2329–35.
39. J.T. Guo, C. Yuan, H.C. Yang, V. Lupinc, and M. Maldini: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1103–10.10.1007/s11661-001-0121-y ↗
40. R.S. Mishra, S.P. Singh, A.M. Sriramamurthy, and M.C. Pandey: Mater. Sci. Technol., 1995, vol. 11, pp. 341–45.10.1179/mst.1995.11.4.341 ↗