Grain Breakup During Elevated Temperature Deformation of an HCP Metal
Source abstract
Abstract
Abstract A combination of mechanical testing, EBSD and crystal plasticity finite element modeling were used to investigate the influence of temperature on the fragmentation of grains in a zirconium alloy. The results demonstrate that grains of Zircaloy-4 fragment more as the temperature rises. This trend can be explained by an increasing difference between the CRSS values for 〈c+a〉 slip and 〈a〉 slip as temperature rises. This change in relative slip activities with temperature is supported by experimental observations of macroscopic anisotropy and in-grain misorientation axes calculated from EBSD data, as well as plasticity modeling. By tracking the microstructural evolution during deformation, it is shown that the two major texture components fragment to different degrees under the action of prismatic slip. Grains in the$$ \left\langle {11\overline{2} 0} \right\rangle $$fiber are significantly more stable than those in the$$ \left\langle {10\overline{1} 0} \right\rangle $$fiber, which break up. Grains of the latter fiber fragment heterogeneously as portions of the grain rotate in opposite directions, and some do not rotate at all.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. B. Cox: J. Nucl Mater., 2005, vol. 336, pp. 331–68.10.1016/j.jnucmat.2004.09.029 ↗
2. C. E. Coleman and D. Hardie: J. Less-Common Met., 1966, vol. 11, pp. 168–85.10.1016/0022-5088(66)90003-8 ↗
3. P. Rodriguez: Encyclopedia of Materials: Science and Technology, K.H. Jurgen-Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, and P. Veyssière, eds., Elsevier Science Ltd, Oxford, 2001.
4. V. Fidleris: J. Nucl. Mater., 1988, vol. 159, pp. 22–42.10.1016/0022-3115(88)90083-9 ↗
5. K. Vaibhaw, S.V.R. Rao, S.K. Jha, N. Saibaba, and R.N. Jayaraj: J. Nucl. Mater., 2008, vol. 383, pp. 71–77.10.1016/j.jnucmat.2008.08.035 ↗
6. H.G. Kim, T.H. Kim, and Y.H. Jeong: J. Nucl. Mater., 2002, vol. 306, pp. 44–53.10.1016/S0022-3115(02)01226-6 ↗
7. G.P. Sabol: J. ASTM Int., 2005, vol. 2, pp. 3–24.10.1520/JAI12942 ↗
8. F. Wagner, N. Bozzolo, O. Van Landuyt, and T. Grosdidier: Acta Mater., 2002, vol. 50, pp. 1245–59.10.1016/S1359-6454(01)00427-X ↗
9. S.K. Sahoo, V.D. Hiwarkar, I. Samajdar, G.K. Dey, D. Srivastav, R. Tiwari, and S. Banerjee: Scripta Mater., 2007, vol. 56, pp. 963–66.10.1016/j.scriptamat.2007.02.008 ↗
10. K.Y. Zhu, D. Chaubet, B. Bacroix, and F. Brisset: Acta Mater., 2005, vol. 53, pp. 5131–40.10.1016/j.actamat.2005.07.034 ↗
11. F. Gerspach, N. Bozzolo, and F. Wagner, Scripta Mater., 2009, vol. 60, pp. 203–206.10.1016/j.scriptamat.2008.09.031 ↗
12. C. Vanitha, M.K. Kumar, G.K. Dey, D. Srivastava, R. Tewari, and S. Banerjee: Mater. Sci. Eng. A Struct. Mater., 2009, vol. 519, pp. 51–60.10.1016/j.msea.2009.04.042 ↗
13. N. Dewobroto, N. Bozzolo, and F. Wagner: Icotom 14: Textures of Materials, Pts 1 and 2, 2005, vol. 495–497, pp. 711–16.10.4028/www.scientific.net/MSF.495-497.711 ↗
14. K.V.M. Krishna, S.K. Sahoo, I. Samajdar, S. Neogy, R. Tewari, D. Srivastava, G.K. Dey, G.H. Das, N. Saibaba, and S. Banarjee: J. Nucl. Mater., 2008, vol. 383, pp. 78–85.10.1016/j.jnucmat.2008.08.050 ↗
15. V.D. Hiwarkar, S.K. Sahoo, I. Samajdar, A. Satpathy, K.V.M. Krishna, G.K. Dey, D. Srivastav, R. Tewari, and S. Banarjee: J. Nucl Mater., 2011, vol. 412, pp. 287–93.10.1016/j.jnucmat.2011.02.043 ↗
16. C.L. Whitmarsh: Oak Ridge National Laboratory, USA, 1962.
17. R.J. McCabe, E.K. Cerreta, A. Misra, G.C. Kaschner, and C.N. Tome: Philos. Mag., 2006, vol. 86, pp. 3595–3611.10.1080/14786430600684500 ↗
18. G.C. Kaschner, C.N. Tome, I.J. Beyerlein, S.C. Vogel, D.W. Brown, and R.J. McCabe: Acta Mater., 2006, vol. 54, pp. 2887–96.10.1016/j.actamat.2006.02.036 ↗
19. J.H. Cho, A.D. Rollett, and K.H. Oh: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3427–38.10.1007/s11661-005-0016-4 ↗
20. Y.B. Chun, M. Battaini, C.H.J. Davies, and S.K. Hwang: Metall. Mater. Trans. A, 2010, 41A, pp. 3473–87.10.1007/s11661-010-0410-4 ↗
21. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy, 1st ed., ASTM, Philadelphia, 1988.10.1520/JAI12945 ↗
22. P. Bate: Philos. Trans. R. Soc. A, 1999, vol. 357, pp. 1589–1601.10.1098/rsta.1999.0391 ↗
23. J.Q. da Fonseca and P.S. Bate: Icotom 14: Textures of Materials, Pts 1 and 2, 2005, vol. 495-497, pp. 1055–60.10.4028/www.scientific.net/MSF.495-497.1055 ↗
24. P.S. Bate and J.Q. da Fonseca: Mater. Sci. Eng., 2004, vol. 380, pp. 365–77.10.1016/j.msea.2004.04.007 ↗
25. D.S. Sarma, K.M. Alotaibi, and K.L. Murty: Mater. Trans. JIM, 1992, vol. 33, pp. 596–603.10.2320/matertrans1989.33.596 ↗
26. F. Xu, R.A. Holt, and M.R. Daymond: J. Nucl. Mater., 2008, vol. 373, pp. 217–25.10.1016/j.jnucmat.2007.05.052 ↗
27. A. Akhtar: J. Nucl. Mater., 1973, vol. 47, pp. 79–86.10.1016/0022-3115(73)90189-X ↗
28. P. Soo and G.T. Higgins: Acta Metall., 1968, vol. 16, pp. 177–86.10.1016/0001-6160(68)90113-2 ↗
29. F. Xu, R.A. Holt, and M.R. Daymond: J. Nucl. Mater., 2009, vol. 394, pp. 9–19.10.1016/j.jnucmat.2009.07.006 ↗
30. I.J. Beyerlein and C.N. Tome: Int. J. Plast., 2008, vol. 24, pp. 867–95.10.1016/j.ijplas.2007.07.017 ↗
31. P. Das Gupta and V.S. Arunachalam: J. Mater. Sci., 1968, vol. 3, pp. 271–81.10.1007/BF00741961 ↗
32. D. Caillard and J. Martin: Thermally Activated Mechanisms in Crystal Plasticity, Cambridge Univ Press, Cambridge, 2003.
33. R.J. McCabe, G. Proust, E.K. Cerreta, and A. Misra: Int. J. Plast., 2009, vol. 25, pp. 454–72.10.1016/j.ijplas.2008.03.010 ↗
34. G.C. Kaschner and G.T. Gray: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1997–2003.10.1007/s11661-000-0227-7 ↗
35. A.T. Churchman: Proc. R. Soc. Lond. Ser. A, 1954, vol. 226, pp. 216–26.10.1098/rspa.1954.0250 ↗
36. D. Raabe, Z. Zhao, and F. Roters: Scripta Mater., 2004, vol. 50, pp. 1085–90.10.1016/j.scriptamat.2003.11.061 ↗
37. O. Van Landuyt, T. Grosdidier, and F. Wagner: Icotom 12, J.A. Szpunar, eds., NRC Research Press, Montreal Canada, 1999.
38. T. Mayama, M. Noda, R. Chiba, and M. Kuroda: Int. J. Plast., 2011, vol. 27, pp. 1916–35.10.1016/j.ijplas.2011.02.007 ↗
39. M.J. Philippe, M. Serghat, P. Vanhoutte, and C. Esling: Acta Metall. Mater., 1995, vol. 43, pp. 1619–30.10.1016/0956-7151(94)00329-G ↗