A Study of Microstructures and Tensile Properties of Two Fe-Mn-Al-Si-C Alloys
Source abstract
Abstract
Two high-manganese steel compositions were prepared (low-carbon steel (LC): 0.05C-26.3Mn-4.88Si-4.13Al-Fe, and high-carbon steel (HC): 0.52C-29.8Mn-2.96Si-2.73Al-Fe). These were homogenized, hot rolled, heat treated, and finally subjected to tensile testing and other characterizations. The LC steel, with a duplex microstructure containing body-centered-cubic (bcc) and face-centered-cubic (fcc) phases, exhibited extremely poor room-temperature ductility. On the other hand, the HC steel, with a single-phase austenitic structure, showed a good tensile property due to twin-induced plasticity (TWIP) effect, with total tensile elongation as high as 56 pct. Structural analysis of steel LC was carried out and it was found that the bcc phase of steel LC was actually an ordered DO3 phase, which was identified as the principal reason of poor ductility of steel LC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. S. Allain, J.-P. Chateau, and O. Bouaziz: Mater. Sci. Eng. A, 2004, vols. 387A–389A, pp. 143–47.10.1016/j.msea.2004.01.060 ↗
2. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
3. S. Vercammen, B. Blanpain, B.C. DeCooman, and P. Wollants: Acta Mater., 2004, vol. 52, pp. 2005–12.10.1016/j.actamat.2003.12.040 ↗
4. Y.G. Kim, J.M. Han, and J.S. Lee: Mater. Sci. Eng. A, 1989, vol. 114, pp. 51–59.10.1016/0921-5093(89)90844-7 ↗
5. N. Cabaňas, N. Akdut, J. Penning, and B.C. DeCooman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3305–15.10.1007/BF02586165 ↗
6. P. Yang, Q. Xie, L. Meng, H. Ding, and Z. Tang: Scripta Mater., 2006, vol. 55, pp. 629–31.10.1016/j.scriptamat.2006.06.004 ↗
7. D. Hua, T.Z. You, L. Wei, W. Me, and S. Dan: J. Iron Steel Res. Int., 2006, vol. 13 (6), pp. 66–70.10.1016/S1006-706X(06)60113-1 ↗
8. K. Ishida, H. Ohtani, N. Satoh, R. Kainuma, and T. Nishijawa: ISIJ Int., 1990, vol. 30, pp. 680–86.10.2355/isijinternational.30.680 ↗
9. O. Acselrad, I.S. Kalashnikov, E.M. Silva, R.A. Simao, C.A. Achete, and L.C. Pereira: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3569–73.10.1007/s11661-002-0345-5 ↗
10. K. Sato, M. Ichinose, Y. Ohirotsu, and Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–77.10.2355/isijinternational.29.868 ↗
11. S. Allain, J.-P. Chateau, D. Dahmoun, and O. Bouaziz: Mater. Sci. Eng., 2004, vols. A 387–A389, pp. 272–76.10.1016/j.msea.2004.05.038 ↗
12. D. Cornette, P. Cugy, A. Hildenbrand, M. Bouzekri, and G. Lovato: Rev. Métallurgie-CIT, 2005, Dec., pp. 905–18.10.1051/metal:2005151 ↗
13. R. Ueji, K. Harada, N. Tsuchida, and K. Kunishige: Mater. Sci. Forum, 2007, vols. 561–565, pp. 107–10.10.4028/www.scientific.net/MSF.561-565.107 ↗
14. ASM Handbook, vol. 3, Alloy Phase Diagrams, ASM INTERNATIONAL, Metals Park, OH, 1992.
15. R. Ramesh, R. Vasudevan, B. Pathiraj, and B.H. Kolster: J. Mater. Sci., 1992, vol. 27, pp. 270–78.10.1007/BF02403673 ↗
16. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley, New York, NY, 1978.
17. B. Bhattacharya and R.K. Ray: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3001–10.10.1007/s11661-000-0079-1 ↗
18. B. Bhattacharya and R K. Ray: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3605–18.10.1007/s11661-002-0236-9 ↗
19. T. Kozakai and T. Miyazaki: ISIJ Int., 1994, vol. 34, pp. 373–83.10.2355/isijinternational.34.373 ↗
20. M.G. Mendiratta and H.A. Lips: in High-Temperature Ordered Intermetallic Alloys, C.C. Koch, C.T. Liu, and N.S. Stoloff, eds., MRS, Pittsburgh, PA, 1989, pp. 155–72.
21. C.G. McKamey, C.T. Liu, J.V. Cathcart, S.A. David, and E.H. Lee: Evaluation of Mechanical and Metallurgical Properties of Fe 3 Al Based Aluminides, Oak Ridge National Laboratory, Oak Ridge, TN, 1986.10.2172/5063422 ↗
22. F. Sorbello, P.E.J. Flewitt, A.G. Crocker, and G. E. Smith: Key Eng. Mater., 2008, vol. 385–87, pp. 1–4.10.4028/www.scientific.net/KEM.385-387.1 ↗
23. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627–33.10.1002/srin.200606440 ↗