journal article·2011-08

Hot Deformation Characteristics of Functionally Graded Steels Produced by Electroslag Remelting

B. Naderi, J. Aghazadeh Mohandesi

Publisher page

Abstract

In this work, a hot compression test was carried out at 1173 K to 1473 K (900°C to 1200 °C), with a strain rate of 0.01 to 1 s−1 up to ~50 pct height reduction on functionally graded steel (FGS) specimens comprised of ferritic, bainitic, austenitic, and martensitic layers (αβγMγ). The stress-strain curves are strongly dependent on temperature and strain rate. Compressive flow stress varied from 40 to 105 MPa depending on the applied temperature and strain rates. Variation in steady-state flow stress with temperature and strain rates was studied. The strain-rate-sensitivity exponent (m) and deformation activation energy (Q) for the αβγMγ composite under studied condition were 0.106 and 354.8 KJ mol−1, respectively, which are within the values of boundary layers of ferrite (304.9 KJ mol−1) and austenite (454.8 KJ mol−1) layers. Given the alternative microstructure of the αβγMγ FGS, a range of deformation mechanisms from dynamic recovery to dynamic recrystallization maybe prevails, where the intensity of each mechanism depends on temperature and strain rates. In accordance with the experimental results, an empirical power-law equation was developed over the range of temperatures and strain rates investigated. The equation accurately describes temperature and strain-rate dependence of the flow stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. G.H. Paulino: Eng. Fract. Mech., 2002, pp. 1519–26.10.1016/S0013-7944(02)00045-0 ↗
2. J. Aghazadeh Mohandesi and M.H. Shahossinie: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3471–76.10.1007/s11661-005-0020-8 ↗
3. J. Aghazadeh Mohandesi and M.H. Shahossinie: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2125–32.10.1007/BF02586133 ↗
4. A. Nazari and J. Aghazadeh Mohandesi: J. Mater. Eng. Perform., 2009, pp. 1058–64, published online.10.1007/s11665-009-9578-4 ↗
5. C.M. Sellars and W.J. McG. Tegart: Mém. Sci. Rev. Metall., 1966, vol. LXIII (9), pp. 731–46.
6. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57–70.10.1016/0001-6160(84)90202-5 ↗
7. J.J. Jonas, C.M. Sellars, and W.J. McG. Tegart: Metall. Rev., 1969, vol. 14, 1969, pp. 1–12.10.1179/095066069790138056 ↗
8. A. Dehghan-Manshadi, M.R. Barnett, and P.D. Hodgson: Mater. Sci. Eng. A, 2007, pp. 664–72.10.1016/j.msea.2007.08.026 ↗
9. S. Raβbach and W. Lehnert: Comput. Mater. Sci., 2000, vol. 19, pp. 298–303.10.1016/S0927-0256(00)00167-1 ↗
10. L.X. Li, D.S. Peng, J.A. Liu, and Z.Q. Liu: J. Mater. Process. Technol., 2001, vol. 112, pp. 1–5.10.1016/S0924-0136(00)00845-1 ↗
11. W. Hai-do, Bin-shi Xu, Jia-jun Liu, Da-ming Zhuang, Shi-cheng Wei, Xian-cheng Zhang, Guo Jin, and Yi Jiang: Mater. Lett., 2005, vol. 59, 2005, pp. 1683–86.10.1016/j.matlet.2005.01.041 ↗
12. S. Hotta, T. Murakami, T. Narushima, Y. Ighchi, and C. Ouchi: ISIJ Int., 2005, vol. 45 (3), pp. 338–4610.2355/isijinternational.45.338 ↗
13. J.M Cabrera, A. Mateo, L. Llanes, J.M. Prado, and M. Anglada: J. Mater. Proc. Technol., 2003, vol. 143–144, pp. 321–25.10.1016/S0924-0136(03)00434-5 ↗
14. J.M. Cabrera, J. Ponce, and J.M. Prado: J. Mater. Proc. Technol., 2003, pp. 403–09.10.1016/S0924-0136(03)00441-2 ↗
15. F.J. Humphreys and Max Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon Materials Series, Oxford, England, 2004, p. 416.10.1016/B978-008044164-1/50012-8 ↗
16. R.A. Petkovic, M.J. Luton, and J.J. Jonas: Can. Metall. Q, 1975, vol. 14, p. 137.10.1179/000844375795050201 ↗
17. M.J. Luton and C.M. Sellars: Acta Metall., 1969, vol. 17, p. 1033.10.1016/0001-6160(69)90049-2 ↗
18. G.J. Davis, J.W. Edington, and C.P. Cutler: Mater. Sci., 1970, p. 1091.10.1007/BF02403283 ↗
19. S. Serajzadeh and A. Karimi Taheri: Mater. Des., 2002, pp. 271–76.10.1016/S0261-3069(01)00080-2 ↗