Factors Distinguishing Hydrogen-Assisted Intergranular and Intergranular-Like Fractures in a Tempered Lath Martensitic Steel
Source abstract
Abstract
Intergranular fracture is the primary fracture mode when a significant amount of hydrogen is introduced into lath martensitic steels. When the introduced hydrogen content is reduced, the contribution of plasticity in the intergranular fracture is significant. Specifically, the crack path is still along prior austenite grain boundaries, but there are some signs of activation of the ductile mechanism (i.e., the tear ridges) on the fracture surface. The plasticity-assisted fracture mode is classified as an intergranular-like fracture. To characterize the difference between intergranular and intergranular-like fractures, these two hydrogen-assisted fracture modes were analyzed in terms of crack path, crack morphology, and local plasticity evolutions. Intergranular fracture occurred in the macroscopically elastic regime with a significant portion of smooth regions on the fracture surface. The intergranular crack growth was discontinuous at the grain size scale, and the preferential microstructure preventing the crack growth was triple junctions of the prior austenite grain boundary. For intergranular-like fracture, plasticity significantly evolved during crack growth, which caused nano-voids in the vicinity of the crack tip. Coalescence of the crack and nano-voids resulted in intergranular-like crack growth along prior austenite grain boundaries. The coalescence with nano-voids caused tear ridges on the intergranular-like fracture surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. G. Krauss and A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343–57.10.1007/BF02814873 ↗
2. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
3. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
4. J.W. Morris, C. Kinney, K. Pytlewski, and Y. Adachi: Sci. Technol. Adv. Mater., DOI: https://doi.org/10.1088/1468-6996/14/1/014208.10.1088/1468-6996/14/1/014208 ↗
5. T. Ohmura, A.M. Minor, E.A. Stach, and J.W. Morris: J. Mater. Res., 2004, vol. 19, pp. 3626–32.10.1557/JMR.2004.0474 ↗
6. M. Nagumo: Fundamentals of Hydrogen Embrittlement, 1st ed. Springer, Tokyo, 2016.10.1007/978-981-10-0161-1 ↗
7. M.L. Martin, J.A. Fenske, G.S. Liu, P. Sofronis, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 1601–06.10.1016/j.actamat.2010.11.024 ↗
8. C.J. McMahon Jr.: Eng. Fract. Mech., 2001, vol. 68, pp. 773–88.10.1016/S0013-7944(00)00124-7 ↗
9. Y. Matsumoto and K. Takai: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 490–97.10.1007/s11661-017-4435-9 ↗
10. Y. Matsumoto, K. Takai, M. Ichiba, T. Suzuki, T. Okamura, and S. Mizoguchi: ISIJ Int., 2013, vol. 53, pp. 714–22.10.2355/isijinternational.53.714 ↗
11. Y. Matsumoto and K. Takai: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 666–77.10.1007/s11661-016-3885-9 ↗
12. G. Ming and R.P. Wei: Acta Metall., 1984, vol. 32, pp. 2115–24.10.1016/0001-6160(84)90190-1 ↗
13. Y.H. Kim and J.W. Morris: Metall. Trans. A., 1983, vol. 14A, pp. 1883–88.10.1007/BF02645559 ↗
14. P. Lejček: Springer Ser. Mater. Sci., 2010, vol. 136, pp. 173–201.10.1007/978-3-642-12505-8_7 ↗
15. G.C. Allen and R.K. Wild: Philos. Mag. A., 1986, vol. 54, pp. L37-l42.10.1080/01418618608242876 ↗
16. P. Novak, R. Yuan, B.P. Somerday, P. Sofronis, and R.O. Ritchie: J. Mech. Phys. Solids., 2010, vol. 58, pp. 206–26.10.1016/j.jmps.2009.10.005 ↗
17. L. Cho, P.E. Bradley, D.S. Lauria, M.L. Martin, M.J. Connolly, J.T. Benzing, E.J. Seo, K.O. Findley, J.G. Speer, and A.J. Slifka: Acta Mater., 2021, vol. 206, p. 116635.10.1016/j.actamat.2021.116635 ↗
18. K. Saito, T. Hirade, and K. Takai: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 5091–102.10.1007/s11661-019-05450-3 ↗
19. A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Procedia Mater. Sci., 2014, vol. 3, pp. 1700–05.10.1016/j.mspro.2014.06.274 ↗
20. K. Ogawa, Y. Matsumoto, H. Suzuki, and K. Takai: ISIJ Int., 2019, vol. 59, pp. 1705–14.10.2355/isijinternational.ISIJINT-2019-130 ↗
21. T. Chen, T. Chiba, M. Koyama, A. Shibata, E. Akiyama, and K. Takai: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 4703–13.10.1007/s11661-021-06423-1 ↗
22. M. Yamaguchi, J. Kameda, K.I. Ebihara, M. Itakura, and H. Kaburaki: Philos. Mag., 2012, vol. 92, pp. 1349–68.10.1080/14786435.2011.645077 ↗
23. J.R. Rice, Z. Suo, and J.-S. Wang: Met. Interfaces., 1990, vol. 4, pp. 269–94.10.1016/B978-0-08-040505-6.50036-2 ↗
24. M. Nagumo and H. Matsuda: Philos. Mag. A., 2002, vol. 82, pp. 3415–25.10.1080/01418610208240452 ↗
25. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A., 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
26. T. Matsumoto, J. Easrman, and H.K. Birnbaum: Scr. Mater., 1981, vol. 15, p. 5.
27. P. Sofronis, Y. Liang, and N. Aravas: Eur. J. Mech. A., 2001, vol. 20, pp. 857–72.10.1016/S0997-7538(01)01179-2 ↗
28. I.M. Robertson: Eng. Fract. Mech., 2001, vol. 68, pp. 671–92.10.1016/S0013-7944(01)00011-X ↗
29. A. Nagao, M. Dadfarnia, B.P. Somerday, P. Sofronis, and R.O. Ritchie: J. Mech. Phys. Solids., 2018, vol. 112, pp. 403–30.10.1016/j.jmps.2017.12.016 ↗
30. A. Shibata, H. Takahashi, and N. Tsuji: ISIJ Int., 2012, vol. 52, pp. 208–12.10.2355/isijinternational.52.208 ↗
31. M. Ohori, T. Chiba, Y. Matsumoto, H. Suzuki, and K. Takai: IOP Conf. Ser. Mater. Sci. Eng., 2018, vol. 461, p. 012062.10.1088/1757-899X/461/1/012062 ↗
32. K. Takai and R. Watanuki: ISIJ Int., 2003, vol. 43, pp. 520–26.10.2355/isijinternational.43.520 ↗
33. M. Wang, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2007, vol. 49, pp. 4081–97.10.1016/j.corsci.2007.03.038 ↗
34. D. Stojakovic: Process. Appl. Ceram., 2012, vol. 6, pp. 1–13.10.2298/PAC1201001S ↗
35. M. Nagumo and K. Takai: Acta Mater., 2019, vol. 165, pp. 722–33.10.1016/j.actamat.2018.12.013 ↗
36. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng. A., 2010, vol. 527, pp. 2738–46.10.1016/j.msea.2010.01.004 ↗
37. S. Dejan: Process. Appl. Ceram., 2012, vol. 6, pp. 1–13.10.2298/PAC1201001S ↗
38. A. Shibata, T. Yonemura, Y. Momotani, M. Heom Park, S. Takagi, Y. Madi, J. Besson, and N. Tsuji: Acta Mater., 2021, vol. 210, p. 116828.10.1016/j.actamat.2021.116828 ↗
39. Y. Takeda and C.J. McMahon: Metall. Trans. A., 1981, vol. 12A, pp. 1255–66.10.1007/BF02642339 ↗
40. Y. Momotani, A. Shibata, D. Terada, and N. Tsuji: Int. J. Hydrogen Energy., 2017, vol. 42, pp. 3371–79.10.1016/j.ijhydene.2016.09.188 ↗
41. K. Takai, J. Seki, and Y. Homma: Mater. Trans. JIM., 1995, vol. 36, pp. 1134–39.10.2320/matertrans1989.36.1134 ↗
42. A. Shibata, T. Murata, H. Takahashi, T. Matsuoka, and N. Tsuji: Metall. Mater. Trans. A., 2015, vol. 46, pp. 5685–96.10.1007/s11661-015-3176-x ↗
43. S.F. Anis, M. Koyama, S. Hamada, and H. Noguchi: Theor. Appl. Fract. Mech., 2020, vol. 107, p. 102561.10.1016/j.tafmec.2020.102561 ↗
44. Y.Z. Wang, J.D. Atkinson, R. Akid, and R.N. Parkins: Fatigue Fract. Eng. Mater. Struct., 1996, vol. 19, pp. 427–39.10.1111/j.1460-2695.1996.tb00979.x ↗
45. V. Venegas, F. Caleyo, T. Baudin, J.M. Hallen, and R. Penelle: Corros. Sci., 2009, vol. 51, pp. 1140–45.10.1016/j.corsci.2009.02.010 ↗
46. K. Okada, A. Shibata, Y. Takeda, and N. Tsuji: Int. J. Hydrogen Energy., 2018, vol. 43, pp. 11298–306.10.1016/j.ijhydene.2018.05.011 ↗
47. T. Homma, S. Anata, S. Onuki, and K. Takai: ISIJ Int., 2021, vol. 61, pp. 2654–65.10.2355/isijinternational.ISIJINT-2021-228 ↗
48. M. Koyama, K. Habib, T. Masumura, T. Tsuchiyama, and H. Noguchi: Int. J. Hydrogen Energy., 2020, vol. 45, pp. 10209–18.10.1016/j.ijhydene.2020.02.014 ↗
49. A. Shibata, Y. Momotani, T. Murata, T. Matsuoka, M. Tsuboi, and N. Tsuji: Mater. Sci. Technol., 2017, vol. 33, pp. 1524–32.10.1080/02670836.2017.1312210 ↗
50. M. Michiuchi, S. Nambu, Y. Ishimoto, J. Inoue, and T. Koseki: Acta Mater., 2009, vol. 57, pp. 5283–91.10.1016/j.actamat.2009.06.021 ↗
51. Y. Mine, K. Hirashita, H. Takashima, M. Matsuda, and K. Takashima: Mater. Sci. Eng. A., 2013, vol. 560, pp. 535–44.10.1016/j.msea.2012.09.099 ↗
52. A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Acta Mater., 2012, vol. 60, pp. 5182–89.10.1016/j.actamat.2012.06.040 ↗
53. M.B. Djukic, G.M. Bakic, V. Sijacki Zeravcic, A. Sedmak, and B. Rajicic: Eng. Fract. Mech., 2019, p. 106528.10.1016/j.engfracmech.2019.106528 ↗
54. A. Shibata, Y. Madi, K. Okada, N. Tsuji, and J. Besson: Int. J. Hydrogen Energy., 2019, vol. 44, pp. 29034–46.10.1016/j.ijhydene.2019.09.097 ↗
55. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, CRC Press, New York, 2004.