journal article·2021-06

Size Control of In Situ Synthesized TiB2 Particles in Molten Aluminum

Jie Yuan, Gongcheng Yao, Shuaihang Pan, Narayanan Murali, Xiaochun Li

Publisher page

Abstract

Aluminum-matrix nanocomposites offer advantageous properties over conventional aluminum alloys. However, controlling the size and size distribution of ceramic nanoparticles during in situ synthesis at high temperatures has been a long-term challenge due to a lack of effective size-control mechanisms. Here, we successfully synthesized titanium diboride (TiB2) nanoparticles with an unprecedented narrow size distribution in molten aluminum. The average size of TiB2 nanoparticles was tunable from 22.1 to 171.4 nm by solely controlling the reaction temperature under a diluted reactant salt solution. To uncover the mechanism of particle size control, an interface diffusion-controlled model was developed. The dilution of reactant salt was crucial to achieve a steady reaction environment while confining the growth of the particles in a shallow region. The model suggests that the average size of as-synthesized nanoparticles is mostly controlled by reaction temperature and unaffected by the titanium salt concentration in a diluted solution due to a steady diffusion of titanium and boron. Temperature controls the diffusion of reactants and nucleation rate to dictate the average size of the as-synthesized nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. J. Geng, G. Liu, T. Hong, M. Wang, D. Chen, N. Ma, and H. Wang: J. Alloys Compd., 2019, vol. 775, pp. 193–201.10.1016/j.jallcom.2018.10.078 ↗
2. C. Mallikarjuna, S.M. Shashidhara, U.S. Mallik, and K.I. Parashivamurthy: Mater. Des., 2011, vol. 32, pp. 3554–9.10.1016/j.matdes.2011.01.036 ↗
3. L.-Y. Chen, J.-Q. Xu, H. Choi, M. Pozuelo, X. Ma, S. Bhowmick, J.-M. Yang, S. Mathaudhu, and X.-C. Li: Nature, 2015, vol. 528, pp. 539–43.10.1038/nature16445 ↗
4. Q. Zhang and D.L. Chen: Scr. Mater., 2004, vol. 51, pp. 863–7.10.1016/j.scriptamat.2004.07.006 ↗
5. Z.Z. Chen and K. Tokaji: Mater. Lett., 2004, vol. 58, pp. 2314–21.10.1016/j.matlet.2004.02.034 ↗
6. C. Cao, L. Chen, J. Xu, J. Zhao, M. Pozuelo, and X. Li: Mater. Lett., 2016, vol. 174, pp. 213–6.10.1016/j.matlet.2016.03.105 ↗
7. C. Cao, W. Liu, Z. Liu, J. Xu, I. Hwang, I. De Rosa, and X. Li: Mater. Des., 2018, vol. 146, pp. 163–71.10.1016/j.matdes.2018.03.008 ↗
8. J.H. Martin, B.D. Yahata, J.M. Hundley, J.A. Mayer, T.A. Schaedler, and T.M. Pollock: Nature, 2017, vol. 549, pp. 365–9.10.1038/nature23894 ↗
9. M. Sokoluk, C. Cao, S. Pan, and X. Li: Nat. Commun., 2019, vol. 10, p. 98.10.1038/s41467-018-07989-y ↗
10. A. Javadi, C. Cao, and X. Li: Procedia Manuf., 2017, vol. 10, pp. 531–5.10.1016/j.promfg.2017.07.038 ↗
11. W. Liu, C. Cao, J. Xu, X. Wang, and X. Li: Mater. Lett., 2016, vol. 185, pp. 392–5.10.1016/j.matlet.2016.09.023 ↗
12. Y. Yang, J. Lan, and X. Li: Mater. Sci. Eng. A, 2004, vol. 380, pp. 378–83.10.1016/j.msea.2004.03.073 ↗
13. A.B. Pandey, R.S. Mishra, and Y.R. Mahajan: Mater. Sci. Eng. A, 1994, vol. 189, pp. 95–104.10.1016/0921-5093(94)90405-7 ↗
14. J. Fjellstedt and A.E.W. Jarfors: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 527–32.10.1016/j.msea.2005.09.054 ↗
15. Y. Tang, Z. Chen, A. Borbély, G. Ji, S.Y. Zhong, D. Schryvers, V. Ji, and H.W. Wang: Mater. Charact., 2015, vol. 102, pp. 131–36.10.1016/j.matchar.2015.03.003 ↗
16. N. El-Mahallawy, M.A. Taha, A.E.W. Jarfors, and H. Fredriksson: J. Alloys Compd., 1999, vol. 292, pp. 221–9.10.1016/S0925-8388(99)00294-7 ↗
17. P. Moldovan and M. Butu: J. Eng. Sci. Innov., 2019, vol. 4, pp. 285–300.
18. A.E. Karantzalis, A. Lekatou, M. Georgatis, V. Poulas, and H. Mavros: J. Mater. Eng. Perform., 2011, vol. 20, pp. 198–202.10.1007/s11665-010-9668-3 ↗
19. Y. Liang, J. Zhou, S. Dong, and T. Yang: J. Wuhan Univ. Technol. Mater Sci Ed, 2008, vol. 23, p. 342.10.1007/s11595-007-3342-0 ↗
20. Z. Liu, Q. Han, Z. Huang, and J. Xing: Metall. Mater. Trans. A, 2016, vol. 47, pp. 916–26.10.1007/s11661-015-3268-7 ↗
21. C. Cao, W. Liu, A. Javadi, H. Ling, and X. Li: Procedia Manuf., 2017, vol. 10, pp. 634–40.10.1016/j.promfg.2017.07.066 ↗
22. A. Javadi, S. Pan, C. Cao, G. Yao, and X. Li: Mater. Lett., 2018, vol. 229, pp. 107–10.10.1016/j.matlet.2018.06.054 ↗
23. N.T.K. Thanh, N. Maclean, and S. Mahiddine: Chem. Rev., 2014, vol. 114, pp. 7610–30.10.1021/cr400544s ↗
24. M.X. Guo, M.P. Wang, K. Shen, L.F. Cao, Z. Li, and Z. Zhang: J. Alloys Compd., 2008, vol. 460, pp. 585–9.10.1016/j.jallcom.2007.06.026 ↗
25. M. Estruga, L. Chen, H. Choi, X. Li, and S. Jin: ACS Appl. Mater. Interfaces, 2013, vol. 5, pp. 8813–9.10.1021/am402719p ↗
26. L. Anestiev, L. Froyen, and L. van Vugt: J. Appl. Phys., 2000, vol. 88, pp. 2130–7.10.1063/1.1303849 ↗
27. L.-Y. Chen, J.-Q. Xu, H. Choi, H. Konishi, S. Jin, and X.-C. Li: Nat. Commun., 2014, vol. 5, p. 3879.10.1038/ncomms4879 ↗
28. J. Xu: UCLA, 2015.
29. A.E. Nielsen: J. Phys. Chem., 1961, vol. 65, pp. 46–9.10.1021/j100819a014 ↗
30. L. Wang: EPJ Web Conf., 2017, vol. 151, p. 02004.10.1051/epjconf/201715102004 ↗
31. T. Wang, F. Zhang, L. Yang, X.W. Fang, S.H. Zhou, M.J. Kramer, C.Z. Wang, K.M. Ho, and R.E. Napolitano: Sci. Rep., 2015, vol. 5, pp. 1–9.
32. X. Wang, J. Song, W. Vian, H. Ma, and Q. Han: Metall. Mater. Trans. B, 2016, vol. 47, pp. 3285–90.10.1007/s11663-015-0570-0 ↗
33. M. Emamy, M. Mahta, and J. Rasizadeh: Compos. Sci. Technol., 2006, vol. 66, pp. 1063–6.10.1016/j.compscitech.2005.04.016 ↗
34. Q. Li and Y.-S. Jun: Commun. Chem., 2018, vol. 1, pp. 1–9.10.1038/s42004-018-0011-5 ↗
35. K.L. Tee, L. Lu, and M.O. Lai: Compos. Struct., 1999, vol. 47, pp. 589–93.10.1016/S0263-8223(00)00030-1 ↗
36. A. Chrysanthou and G. Erbaccio: J. Mater. Sci., 1995, vol. 30, pp. 6339–44.10.1007/BF00369685 ↗
37. E. Taheri-Nassaj, M. Kobashi, and T. Choh: Scr. Mater., 1997, vol. 37, pp. 605–14.10.1016/S1359-6462(97)00140-1 ↗
38. I. Gotman, M.J. Koczak, and E. Shtessel: Mater. Sci. Eng. A, 1994, vol. 187, pp. 189–99.10.1016/0921-5093(94)90347-6 ↗
39. C. Biselli, D.G. Morris, and N. Randall: Scr. Metall. Mater., 1994, vol. 30, pp. 1327–32.10.1016/0956-716X(94)90267-4 ↗
40. L. Lu, M.O. Lai, X.P. Niu, and H.N. Ho: Z. Fuer Met. Res. Adv. Tech., 1998, vol. 89, pp. 567–72.
41. X. Liu, Y. Liu, D. Huang, Q. Han, and X. Wang: Mater. Sci. Eng. A, 2017, vol. 705, pp. 55–61.10.1016/j.msea.2017.08.047 ↗
42. C.F. Feng and L. Froyen: J. Mater. Sci., 2000, vol. 35, pp. 837–50.10.1023/A:1004729920354 ↗
43. G. Han, W. Zhang, G. Zhang, Z. Feng, and Y. Wang: Mater. Sci. Eng. A, 2015, vol. 633, pp. 161–8.10.1016/j.msea.2015.03.021 ↗
44. D. Chen, Z. Chen, P. Zhang, Y.J. Zhang, H. Ma, and H.W. Wang: Adv. Mater. Res., 2012, vol. 535–537, pp. 1005–10.10.4028/www.scientific.net/AMR.535-537.1005 ↗
45. L. Lu, M.O. Lai, and F.L. Chen: Acta Mater., 1997, vol. 45, pp. 4297–309.10.1016/S1359-6454(97)00075-X ↗
46. M. Wang, D. Chen, Z. Chen, Y. Wu, F. Wang, N. Ma, and H. Wang: Mater. Sci. Eng. A, 2014, vol. 590, pp. 246–54.10.1016/j.msea.2013.10.021 ↗
47. J.V. Wood, P. Davies, and J.L.F. Kellie: Mater. Sci. Technol., 1993, vol. 9, pp. 833–40.10.1179/026708393790171467 ↗
48. S. Lakshmi, L. Lu, and M. Gupta: J. Mater. Process. Technol., 1998, vol. 73, pp. 160–6.10.1016/S0924-0136(97)00225-2 ↗
49. J. Xue, J. Wang, Y. Han, C. Chen, and B. Sun: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, pp. 1012–7.10.1016/S1003-6326(11)61277-6 ↗
50. Y. Chen and D.D.L. Chung: J. Mater. Sci., 1996, vol. 31, pp. 311–5.10.1007/BF01139145 ↗
51. K. Sivaprasad, S.P.K. Babu, S. Natarajan, R. Narayanasamy, B.A. Kumar, and G. Dinesh: Mater. Sci. Eng. A, 2008, vol. 498, pp. 495–500.10.1016/j.msea.2008.09.003 ↗
52. Y. Han, X. Liu, and X. Bian: Compos. Part Appl. Sci. Manuf., 2002, vol. 33, pp. 439–44.10.1016/S1359-835X(01)00124-5 ↗
53. M.A. Herbert, C. Sarkar, R. Mitra, and M. Chakraborty: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2110–26.10.1007/s11661-007-9264-9 ↗
54. A. Mandal, R. Maiti, M. Chakraborty, and B. Murty: Mater. Sci. Eng. A, 2004, vol. 386, pp. 296–300.10.1016/S0921-5093(04)00938-4 ↗
55. M. Mandal and R. Mitra: Mater. Charact., 2018, vol. 146, pp. 267–78.10.1016/j.matchar.2018.10.010 ↗
56. Z.Y. Ma, J. Bi, Y.X. Lu, H.W. Shen, and Y.X. Gao: Compos. Interfaces, 1993, vol. 1, pp. 287–91.10.1163/156855493X00121 ↗
57. Z.Y. Ma, J.H. Li, S.X. Li, X.G. Ning, Y.X. Lu, and J. Bi: J. Mater. Sci., 1996, vol. 31, pp. 741–7.10.1007/BF00367894 ↗
58. A.K. Kuruvilla, K.S. Prasad, V.V. Bhanuprasad, and Y.R. Mahajan: Scr. Metall. Mater., 1990, vol. 24, pp. 873–8.10.1016/0956-716X(90)90128-4 ↗
59. Z. Li, D. Chen, H. Wang, E.J. Lavernia, and A. Shan: J. Mater. Res. Warrendale, 2014, vol. 29, pp. 2514–24.10.1557/jmr.2014.280 ↗
60. J.P. Tu, N.Y. Wang, Y.Z. Yang, W.X. Qi, F. Liu, X.B. Zhang, H.M. Lu, and M.S. Liu: Mater. Lett., 2002, vol. 52, pp. 448–52.10.1016/S0167-577X(01)00442-6 ↗