journal article·2020-05Open access

Nitrogen Effects in Additively Manufactured Martensitic Stainless Steels: Conventional Thermal Processing and Comparison with Wrought

Eric A. Lass, Fan Zhang, Carelyn E. Campbell

Abstract

The microstructures of additively manufactured (AM) precipitation-hardenable stainless steels 17-4 and 15-5 were investigated and compared to those of conventionally produced materials. The residual N found in N2-atomized 17-4 powder feedstock is inherited by the additively produced material, and has dramatic effects on phase stability, microstructure, and microstructural evolution. Nitrogen is a known austenite stabilizing element, and the as-built microstructure of AM 17-4 can contain up to 90 pct or more retained austenite, compared to the nearly 100 pct martensite structure of wrought 17-4. Even after homogenization and solutionization heat treatments, AM 17-4 contains 5 to 20 pct retained austenite. In contrast, AM 15-5 and Ar-atomized AM 17-4 contain<5 pct retained austenite in the as-built condition, and this level is further decreased following post-build thermal processing. Computational thermodynamics-based calculations qualitatively describe the observed depression in the martensite start temperature and martensite stability as a function of N-content, but require further refinements to become quantitative. A significant increase in the volume fraction of fine-scale carbide precipitates attributed to the high N-content of AM 17-4 is also hypothesized to give rise to additional activation barriers for the dislocation motion required for martensite nucleation and subsequent growth. An increase in the volume fraction of carbide/nitride precipitates is observed in AM 15-5, although they do not inhibit martensite formation to the extent observed in AM 17-4.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. AK Steel Product Data Bulletin, 17-4 PH Stainless Steel, AK Steel Corporation, West Chester, OH, December 2016.
2. ATI Technical Data Sheet, ATI 17-4 Precipitation Hardening Stainless Steel, Allegheny Technologies Incorporated, Pittsburgh, PA, August 2016.
3. AK Steel Product Data Bulletin, 15-5 PH Stainless Steel, AK Steel Corporation, West Chester, OH, July 2007.
4. ATI Technical Data Sheet, ATI 15-5 Precipitation Hardening Stainless Steel, Allegheny Technologies Incorporated, Pittsburgh, PA, March 2012.
5. Aerospace Material Specification 5355J, Steel, Corrosion Resistant, Investment Castings, 16Cr-4.1Ni-0.28Nb-3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated. SAE Aerospace, SAE International, 2009.
6. T.L. Starr, K. Rafi, B. Stucker, C.M. Scherzer, 23rd Annual Solid Freeform Fabrication Symposium, 2012, pp. 439–46.
7. L.E. Murr, E. Martinez, J. Hernandez, S. Collins, K.N. Amato, S.M. Gaytan, P.W. Shindo, J. Mater. Res. Technol., 2012, vol. 1, pp. 167-77.10.1016/S2238-7854(12)70029-7 ↗
8. S.D. Meredith, J.S. Zuback, J.S. Keist, T.A. Palmer, Mater. Sci. Eng. A, 2018, vol. 738, pp. 44-56.10.1016/j.msea.2018.09.066 ↗
9. S. Cheruvathur, E.A. Lass, C.E. Campbell, JOM, 2016, vol. 68, pp. 930-42.10.1007/s11837-015-1754-4 ↗
10. E.A. Lass, M.R. Stoudt, M.E. Williams, Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1619-24.10.1007/s11661-019-05124-0 ↗
11. M.R. Stoudt, R.E. Ricker, E.A. Lass, L.E. Levine, JOM, 2017, vol. 69, pp. 506-15.10.1007/s11837-016-2237-y ↗
12. B.D. Salzbrenner, M.S. Thesis, The University of New Mexico, Albuquerque, New Mexico, 2017.
13. A.B. Lass, G. Welsh, U.S. Naval Air Systems Command (NAVAIR), private communication, 2017.
14. J.S. Keist, T.A. Palmer, Pennsylvania State University, private communication, 2017.
15. Additive Manufacturing Benchmark Test Series (AM-Bench). https://www.nist.gov/ambench. Accessed 12 Dec 2018.
16. K.M. Coffy, M.S. Thesis, University of Central Florida, Orlando, Florida, 2014.
17. E.W. Lum, M.S. Thesis, Air Force Institute of Technology, Wright-Patterson Air Force Base, Ohio, 2017.
18. W.E. Luecke, J.A. Slotwinski, J. Res. Natl. Inst. Stand. Technol., 2014, vol. 119, pp. 398-418.10.6028/jres.119.015 ↗
19. H.K. Rafi, D. Pal, N. Patil, T.L. Starr, B.E. Stucker, J. Mater. Eng. Perf., 2014, vol. 23, pp. 4421-8.10.1007/s11665-014-1226-y ↗
20. B. Clausen, D.W. Brown, J.S. Carpenter, K.D. Clarke, A.J. Clarke, S.C. Vogel, J.D. Bernardin, D. Spernjak, J.M. Thompson, Mater. Sci. Eng. A, 2017, vol. 696, pp. 331-40.10.1016/j.msea.2017.04.081 ↗
21. D.W. Brown, J.D. Bernardin, J.S. Carpenter, B. Clausen, D. Spernjak, J.M. Thompson, Mater. Sci. Eng. A, 2016, vol. 678, pp. 291-8.10.1016/j.msea.2016.09.086 ↗
22. G.E. Dieter, Mechanical Metallurgy, 3rd Edition. McGraw Hill, Boston, Massachusetts, 1986.
23. A. Yadollahi, N. Shamsaei, S.M. Thompson, A. Elwany, L. Bian, Int. J. Fatigue, 2017, vol. 94, pp. 218-35.10.1016/j.ijfatigue.2016.03.014 ↗
24. B. AlMangour, J.-M. Yang, Int. J. Adv. Manuf. Technol., 2017, vol. 90, pp. 119-26.10.1007/s00170-016-9367-9 ↗
25. H.K. Rafi, T.L. Starr, B.E. Stucker, Int. J. Adv. Manuf. Technol., 2013, vol. 69, pp. 1299-1309.10.1007/s00170-013-5106-7 ↗
26. C. Buchannan, V.-P. Matilainen, A. Salminen, L. Gardner, J. Constr. Steel Res., 2017, vol. 136, pp. 35-48.10.1016/j.jcsr.2017.05.002 ↗
27. D. Roberts, Y. Zhang, I. Charit, J. Zhang, Prog. Add. Manuf., 2018, vol. 3, pp. 183-90.10.1007/s40964-018-0051-5 ↗
28. T. LeBrun, T. Nakamoto, K. Horikawa, H. Kobayashi, Mater. Des., 2015, vol. 81, pp. 44-53.10.1016/j.matdes.2015.05.026 ↗
29. H.Ö. Gülsoy, S. Özbek, T. Baykara, Powder Metall., 2007, vol. 50, pp. 120-26.10.1179/174329007X153288 ↗
30. R. Gerling, R. Leitgeb, F.-P. Schimansky, Mater. Sci. Eng. A, 1998, vol. 252A, pp. 239-47.10.1016/S0921-5093(98)00656-X ↗
31. G. Wegmann, R. Gerling, F.-P. Schimansky, Acta Mater., 2003, vol. 51, pp. 741-52.10.1016/S1359-6454(02)00465-2 ↗
32. B.D. Cullity, “Elements of X-ray Diffraction”, 2nd Edition. Addison-Wesley Publishing Company, Inc., Philippines, 1978.
33. P.L. Lee, D. Shu, M. Ramanathan, C. Preissner, J. Wang, M.A. Beno, R.B. Von Dreele, L. Ribaud, C. Kurtz, S.M. Antao, J. Synchrotron Radiat., 2008, vol. 15, pp. 427-32.10.1107/S0909049508018438 ↗
34. B.H. Toby, R.B. Von Dreele, J. Appl. Crystallogr., 2013, vol. 46, pp. 544-4910.1107/S0021889813003531 ↗
35. F. Zhang, L.E. Levine, A.J. Allen, S.W. Young, M.E. Williams, M.R. Stoudt, K.-W. Moon, J.C. Heigel, J. Ilavsky, IMMI, 2019, submitted
36. Thermo-Calc 2018b, Themo-Calc Software AB, Stockholm, Sweden, 2018.
37. TCFE8 Fe-based superalloy database, Themo-Calc Software AB, Stockholm, Sweden, 2016.
38. G. Ghosh, G.B. Olson, Acta Metall. Mater., 1994, vol. 42, pp. 3361-70.10.1016/0956-7151(94)90468-5 ↗
39. G. Ghosh, G.B. Olson, Acta Metall. Mater., 1994, vol. 42, pp. 3371-79.10.1016/0956-7151(94)90469-3 ↗
40. G.B. Olson, M. Cohen, Metall. Trans. A, 1976 vol. 7A, pp. 1897-1904.
41. G.B. Olson, M. Cohen, Metall. Trans. A, 1976 vol. 7A, pp. 1905-14.
42. G.B. Olson, M. Cohen, Metall. Trans. A, 1976 vol. 7A, pp. 1915-23.10.1007/BF02654989 ↗
43. H.K. Danielsen, Ph.D. Dissertation, Technical University of Denmark, 2007.
44. H.K. Danielsen, Mater. Sci. Tech., 2016, vol. 32, pp. 126-37.10.1179/1743284715Y.0000000066 ↗
45. M. Alnajjar, F. Christien, K. Wolski, C. Bosch, Additive Manuf., 2019, vol. 25, pp. 187-95.
46. E.A. Lass, M.R. Stoudt, M.E. Williams, M.B. Katz, L.E. Levine, T.Q. Phan, T.H. Gnaeupel-Herold, D.S. Ng: Metall. Mater. Trans. A, vol. 48A, pp. 5547-58 (2017)10.1007/s11661-017-4304-6 ↗
47. M. Wendler, B. Reichel, R. Eckner, O. Fabrichnaya, L. Krüger, A. Weiss, J. Mola, Metall. Mater. Trans. A, 2016, vol. 47A, pp. 139-51.10.1007/s11661-014-2716-0 ↗
48. T. Sawaguchi, L.-G. Bujoreanu, T. Kikuchi, K. Ogawa, F. Yin, ISIJ Int., 2008, vol. 48, pp. 99-106.10.2355/isijinternational.48.99 ↗
49. M. Grujicic, G.B. Olson, W.S. Owen, Metall. Trans. A, 1985, vol. 16A, pp. 1713-22.10.1007/BF02670359 ↗
50. M. Grujicic, G.B. Olson, W.S. Owen, Metall. Trans. A, 1985, vol. 16A, pp. 1723-34.10.1007/BF02670360 ↗
51. M. Grujicic, G.B. Olson, W.S. Owen, Metall. Trans. A, 1985, vol. 16A, pp. 1735-44.10.1007/BF02670361 ↗