Study of Residual Stresses in Additively Manufactured Ti-6Al-4V by Neutron Diffraction Measurements
Source abstract
Abstract
Neutron diffraction is a powerful non-destructive volumetric evaluation method for the analysis of the internal stress state in components processed by laser powder bed fusion (LPBF). High cooling rates and heterogeneous distribution of temperature during additive manufacturing lead to large residual stress fields. Residual stresses developed during the building process have unquestionably an important influence on the mechanical performance and potentially lead to delamination from the support structures, shape distortion but also crack formation. In the present work, neutron measurements have been carried out on cube-shaped samples prepared by LPBF from a Ti-6Al-4V powder bed. A series of miscellaneous positions (center, edge, and corner) over three different depths (close substrate, middle, and close surface) have been analyzed by neutron diffraction so as to systematically characterize the full stress tensor. The influence of shear stresses and second-order residual stresses on the stress tensor analysis is also discussed in this work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Frazier E (2014) J Mater Eng Perform 23:1917–1928.10.1007/s11665-014-0958-z ↗
2. Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, Sing SL (2015) Appl Phys Rev 2:1-21.10.1063/1.4935926 ↗
3. L.-C. Zhang, H. Attar: Adv. Eng. Mater., 2016, vol. 18, pp. 463-475.10.1002/adem.201500419 ↗
4. W.S.W. Harun, N.S. Manam, M.S.I.N. Kamariah, S. Sharif, A.H. Zulkifly, I. Ahmad, H. Miura: Powder Technol., 2018, vol. 331, pp. 74-97.10.1016/j.powtec.2018.03.010 ↗
5. J.-P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts, B. Lauwers: J. Mater. Process. Tech., 2004, vol. 149, pp. 616-622.10.1016/j.jmatprotec.2003.11.051 ↗
6. D.W. Brown, J.D. Bernardin, J.S. Carpenter, B. Clausen, D. Spernjak, J.M. Thompson: Mater. Sci. Eng. A, 2016, vol. 678, pp. 291–298.10.1016/j.msea.2016.09.086 ↗
7. M. Awd, J. Tenkamp, M. Hirtler, S. Siddique, M. Bambach, F. Walther: Materials, 2018, vol. 11, pp. 1-17.
8. B. Vrancken: Study of residual stresses in selective laser melting, Faculty of engineering Science. PhD Dissertation, University of Leuven, 2016.
9. P. Mercelis, J.-P. Kruth: Rapid Prototyping J., 2006, vol. 12, pp. 254–265.10.1108/13552540610707013 ↗
10. H. Shipley, D. McDonnell, M. Culleton, R. Coull, R. Lupoi, G. O’Donnell, D. Trimble: Int. J. Mach. Tool. Manu., 2018, vol. 128, pp. 1–20.10.1016/j.ijmachtools.2018.01.003 ↗
11. M. B. Prime: J. Eng. Mater. Tech., 2000, vol. 123, pp. 162-168.10.1115/1.1345526 ↗
12. ASTM Standard E837 REV A: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, ASTM International, West Conshohocken, PA, 2013.
13. M.B. Prime: Appl. Mech. Rev., 1999, vol. 52, pp. 75-96.10.1115/1.3098926 ↗
14. Y. Liu, Y. Yang, D. Wang: Int. J. Adv. Manuf. Tech., 2016, vol. 87, pp. 647–656.10.1007/s00170-016-8466-y ↗
15. L.S. Anderson, A.M. Venter, B. Vrancken, D. Marais, J. Van Humbeeck, T.H. Becker: Mater. Res. Proc., 2018, vol. 4, pp. 73-78.10.21741/9781945291678-11 ↗
16. V. Hauk, Structural and Residual Stress Analysis by Nondestructive Methods, Elsevier, Amsterdam, 1997.
17. D. Gloaguen, G. Oum, V. Legrand, J. Fajoui, S. Branchu: Acta Mater., 2013, vol. 61, pp. 5779-5790.10.1016/j.actamat.2013.06.022 ↗
18. L. Pintschovius, V. Jung, E. Macherauch, O. Vohringer: Mater. Sci. Eng., 1983, vol. 61, pp. 43-50.10.1016/0025-5416(83)90124-6 ↗
19. L. Steven Anderson: Evaluating measurement techniques: establishing a testing framework for residual stress in selective laser melted Ti-6Al-4V, Faculty of Engineering PhD Dissertation, University of Stellenbosch, 2017.
20. A. Kromm, S. Cabeza, T. Mishurova, N. Nadammal, T. Thiede, G. Bruno: Mater. Res. Proc., 2018, vol. 6, pp. 259-264.10.21741/9781945291890-41 ↗
21. V.-D. Le, E. Pessard, F. Morel, F. Edy: Eng. Fract. Mech., 2019, vol. 214, pp. 410-426.10.1016/j.engfracmech.2019.03.048 ↗
22. He BB (2018) Two-dimensional X-ray diffraction. Wiley, Hoboken, pp 292–29310.1002/9781119356080 ↗
23. [23] P. J. Withers, M. Preuss, A. Steuwer, J. W. L. Pang: J. Appl. Cryst., 2007, vol. 40, pp. 891-904.10.1107/S0021889807030269 ↗
24. H. Dölle, V. Hauk: Z. Metalkde, 1978, vol. 69, pp. 410-417.
25. A. Baczmanski, N. Hfaiedh, M. François, K. Wierzbanowski: Mater. Sci. Eng. A, 2009, vol. 501, pp. 153-165.10.1016/j.msea.2008.09.072 ↗
26. [26] I.C. Noyan: Mater. Sci. Eng., 1985, vol. 75, pp. 95-103.10.1016/0025-5416(85)90181-8 ↗
27. Hofmann M, Gan W, Rebelo-Kornmeier J (2015) J Large-Scale Res Facil. 1A6:1-4.
28. Rebelo Kornmeier J, Hofmann M, Gan WM, Randau C, Braun K, Zeitelhack K, Defendi I, Krueger J, Faulhaber E, Brokmeier H (2017) Mater. Sci. Forum 905:151–156.10.4028/www.scientific.net/MSF.905.151 ↗
29. Simmons G, Wang H (1971) Single Crystal Elastic Constants and Calculated Aggregate Properties. MIT Press, Cambridge
30. D. Gloaguen, T. Berchi, E. Girard, R. Guillén: J. Nucl. Mater., 2008, vol. 374, pp. 138-146.10.1016/j.jnucmat.2007.07.017 ↗
31. Kocks UF, Tomé CN, Wenk HR (1998) Texture and Anisotropy. Cambridge University Press, Cambridge, pp 288–289
32. T. Simson, A. Emmel, A. Dwars, J. Böhm: Addit. Manuf., 2017, vol. 17, pp. 183–189.10.1016/j.addma.2017.07.007 ↗
33. [34] C. Li, Z.Y. Liu, X.Y. Fang, Y.B. Guo: Procedia CIRP, 2018, vol. 71, pp. 348-353.10.1016/j.procir.2018.05.039 ↗
34. H. Ali, L. Ma, H. Ghadbeigi, K. Mumtaz: Mater. Sci. Eng. A, 2017, vol. 695, pp. 211-220.10.1016/j.msea.2017.04.033 ↗
35. R. Mertens, B. Vranchen, N. Holmstock, Y. Kinds, J.-P. Kruth, J. Van Humbeeck: Physics Procedia, 2016, vol. 83, pp. 882-890.10.1016/j.phpro.2016.08.092 ↗
36. I. Yadroitec, I. Yadroitsava: Virtual Phys. Prototyp., 2015, vol. 10, pp. 67–76.10.1080/17452759.2015.1026045 ↗
37. M.E. Fitzpatrick, A. Lodini (2003) Analysis of Residual Stress by Diffraction using Neutron and Synchrotron radiation. Taylor & Francis, Routledge.10.1201/9780203608999 ↗
38. R.A Winholtz, A.D. Krawitz: Mater. Sci. Eng. A, 1996, vol. 205, pp. 257-258.10.1016/0921-5093(95)10040-7 ↗
39. D. Gloaguen, M. François, R. Guillén: J. Appl. Cryst., 2004, vol. 37, pp. 934-940.10.1107/S0021889804022034 ↗