journal article·2019-07-15

Effect of Heat Treatment on the Al-Cu Feedstock Powders for Cold Spray Deposition

Tian Liu, William A. Story, Luke N. Brewer

Publisher page

Abstract

This paper examines the effects of heat treatment on the Al-Cu feedstock powders used for cold spray deposition. In particular, we relate improvement of the powder to changes in the spray characteristics and microstructure of cold-sprayed coatings. The inert-gas-atomized Al-Cu powders were solutionized at 535 °C for 2 hours using a rotary furnace, followed by a water quench. Heat treatment of the powders not only eliminated most of the cellular solidification structure generated by the gas atomization process but also resulted in significant grain growth in the powder particles. After solution treatment, the copper content in the α-aluminum matrix increased as expected. After heat treatment, the powders were immediately cold sprayed onto AA2024 substrates. Heat treatment of Al-Cu feedstock powders significantly increased the deposition efficiency for all compositions tested. For heat-treated powders, the deposition efficiency systematically decreased with the increasing copper content, while the coating hardness increased. The formation of GP zones or θ″/θ′ strengthening precipitates through natural aging was not generally observed in the powder particles, but θ″/θ′ precipitates were observed in some cases for the cold-sprayed material with higher copper content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Aluminum Alloys Composites Properties · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. J. Villafuerte: Modern Cold Spray: Materials, Process, and Applications, Springer International Publishing, Switzerland, 2015, pp. 1-6.10.1007/978-3-319-16772-5 ↗
2. N. Matthews, R. Jones, and G. Sih: Sci. China, 2014, vol. 57, pp. 12-18.
3. R. Jones, L. Molent, S. Barter, N. Matthews, and D. Tamboli: Int. J. Fatigue, 2014, vol. 68, pp. 260-68.10.1016/j.ijfatigue.2014.03.013 ↗
4. J. Villafuerte and D. Wright: Adv. Mater. Processes, 2010, vol. 168, pp. 53-55.
5. P. Leyman and V.K. Champagne: Cold spray process development for the reclamation of the apache helicopter mast support, Report No. ARL-TR-4922, Army Research Laborotary, Aberdeen Proving Ground, MD, August 2009.
6. B. Deforce, T.J. Eden, and H.W. Pickering: Mater. Perform., 2009, vol. 48, pp. 40-44.
7. K. Petráčková, J. Kondás, and M. Guagliano: J. Therm. Spray Technol., 2017, vol. 26, pp. 1888-97.10.1007/s11666-017-0643-5 ↗
8. L. Ajdelsztajn, A. Zuniga, B. Jodoin, and E. Lavernia: Surf. Coat. Technol., 2006, vol. 201, pp. 2109-16.10.1016/j.surfcoat.2005.06.001 ↗
9. M. Rokni, C. Widener, and V. Champagne: J. Therm. Spray Technol., 2014, vol. 23, pp. 514-24.10.1007/s11666-013-0049-y ↗
10. M. Rokni, C. Widener, and V. Champagne: Appl. Surf. Sci., 2014, vol. 290, pp. 482-489.10.1016/j.apsusc.2013.11.127 ↗
11. M.R. Rokni, C.A. Widener, O.C. Ozdemir, and G.A. Crawford: Surf. Coat. Technol., 2017, vol. 309, pp. 641-50.10.1016/j.surfcoat.2016.12.035 ↗
12. M. Rokni, C. Widener, and G. Crawford: Surf. Coat. Technol., 2014, vol. 251, pp. 254-263.10.1016/j.surfcoat.2014.04.035 ↗
13. M. Rokni, C. Widener, V. Champagne, and G. Crawford: Surf. Coat. Technol., 2015, vol. 276, pp. 305-15.10.1016/j.surfcoat.2015.07.016 ↗
14. M. Rokni, C. Widener, G. Crawford, and M. West: Mater. Sci. Eng. A, 2015, vol. 625, pp. 19-27.10.1016/j.msea.2014.11.059 ↗
15. M.R. Rokni, C.A. Widener, V.K. Champagne, G.A. Crawford, and S.R. Nutt: Surf. Coat. Technol., 2017, vol. 310, pp. 278-85.10.1016/j.surfcoat.2016.10.064 ↗
16. M. Rokni, S. Nutt, C. Widener, V. Champagne, and R. Hrabe: J. Therm. Spray Technol., 2017, vol. 26, pp. 1308-55.10.1007/s11666-017-0575-0 ↗
17. B. Zheng, Y. Lin, Y. Zhou, and E.J. Lavernia: Metall. Mater. Trans. B, 2009, vol. 40, pp. 995-1004.10.1007/s11663-009-9277-4 ↗
18. A. Prasad, H. Nenein, and K. Conlon: Metall. Mater. Trans. A, 2006, vol. 37, pp. 1589-96.10.1007/s11661-006-0102-2 ↗
19. G. Kasperovich, T. Volkmann, L. Ratke, and D. Herlach: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1183-91.10.1007/s11661-008-9505-6 ↗
20. T. Liu, J.D. Leazer, S.K. Menon, and L.N. Brewer: Surf. Coat. Technol., 2018, vol. 350, pp. 621-32.10.1016/j.surfcoat.2018.07.006 ↗
21. W.A. Story and L.N. Brewer: Metall. Mater. Trans. A, 2018, vol. 49, pp. 446-49.10.1007/s11661-017-4428-8 ↗
22. A. Sabard, H. de VilliersLovelock, and T. Hussain: J. Therm. Spray Technol., 2018, vol. 27, pp. 145-58.10.1007/s11666-017-0662-2 ↗
23. A.M. Mullis, L. Farrell, R.F. Cochrane, and N.J. Adkins: Metall. Mater. Trans. B, 2013, vol. 44, pp. 992-99.10.1007/s11663-013-9856-2 ↗
24. M. Meyers and K.K. Chawla: Mechanical behavior of materials, 2nd ed., Cambridge University Press, Cambridge, UK, 2009, pp. 571-79.
25. Y. She, A.T. Nardi, and M.A. Klecka: High Temperature Fluidized Bed for Powder Treatment, US Patent 9,555,474 B2, 2017.
26. M. Rokni, A. Nardi, V. Champagne, and S. Nutt: J. Therm. Spray Technol., 2018, vol. 27, pp. 818-26.10.1007/s11666-018-0723-1 ↗
27. W.A. Story and L.N. Brewer: Method and Apparatus for Heat Treating Feedstock Powder, patent application: USPTO-U.S.S.N. 62/535,417, 2017.
28. T. Liu, J.D. Leazer, H. Bannister, and L.N. Brewer: Influence of alloy additions on the microstrcutre, texture, and properties of low-pressure cold sprayed Al-Cu alloys, J. Therm. Spray Technol. (accepted), 2019.10.1007/s11666-019-00860-6 ↗
29. A. Day, P. Trimby, K. Mehnert, and B. Neumann: Channel 5 user manual, HKL Technology A/S, Hobro, Denmark, 2001.
30. K. Mingard, A. Day, and P. Quested: Mater. Sci. Eng., 2014, vol. 55, pp. 012011.10.1088/1757-899X/55/1/012011 ↗
31. J.F. Li, Z.H. Ye, D.Y. Liu, Y.L. Chen, X.H. Zhang, X.Z. Xu, and Z.Q. Zheng: Acta Metall. Sin., 2017, vol. 30, pp. 133-45.10.1007/s40195-016-0519-6 ↗
32. G.H. Geiger and D.R. Poirier: Transport phenomena in metallurgy, Addison-Wesley Publishing Company, Reading, MA, 1973, pp. 199-203.
33. C.R. Brooks, ASM Metals Handbook, vol. 4: Heat Treating, ASM, Metals Park, OH, 1991.
34. G. Lorimer: Precipitation in aluminum alloys, Proceedings of Precipitation Processes in Solids, TMS-AIME, 1978, pp. 87–119.
35. K. Tsaknopoulos, C. Walde, V. Champagne, and D. Cote: JOM, vol. 71, 2019, pp. 435-443.10.1007/s11837-018-3175-7 ↗
36. S. Son, M. Takeda, M. Mitome, Y. Bando, and T. Endo: Mater. Lett., 2005, vol. 59, pp. 629-32.10.1016/j.matlet.2004.10.058 ↗
37. N. Ünlü, B. Gable, G. Shiflet, and E. Starke: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2757-69.10.1007/s11661-003-0177-y ↗
38. S. Ringer, B. Muddle, and I. Polmear: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1659-71.10.1007/BF02670753 ↗
39. M. Murayama, Z. Horita, and K. Hono: Acta Mater., 2001, vol. 49, pp. 21-29.10.1016/S1359-6454(00)00308-6 ↗
40. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye: Acta Mater., 2006, vol. 54, pp. 729-42.10.1016/j.actamat.2005.10.005 ↗
41. W.A. Story: Processing-Microstructure-Property Relations in High Pressure Cold Spray of AA2024 and AA7075, Metallurgical and Materials Engineering, The University of Alabama, Tuscaloosa, AL, Ph.D. Disseration, 2018.
42. J. Cahoon, W. Broughton, and A. Kutzak: Metall. Trans., 1971, vol. 2, pp. 1979-83.10.1007/BF02913433 ↗
43. M. Tiryakioğlu, J. Robinson, M. Salazar-Guapuriche, Y. Zhao, and P. Eason: Mater. Sci. Eng. A, 2015, vol. 631, pp. 196-200.10.1016/j.msea.2015.02.049 ↗
44. A.P. Sekhar, S. Nandy, K.K. Ray, and D. Das: Mater. Sci. Eng., 2018, vol. 338, pp. 012011.10.1088/1757-899X/338/1/012011 ↗
45. R. Ghelichi, D. MacDonald, S. Bagherifard, H. Jahed, M. Guagliano, and B. Jodoin: Acta Mater., 2012, vol. 60, pp. 6555-61.10.1016/j.actamat.2012.08.020 ↗
46. J. Gubicza, N.Q. Chinh, G. Krállics, I. Schiller, and T. Ungár: Curr. Appl. Phy., 2006, vol. 6, pp. 194-99.10.1016/j.cap.2005.07.039 ↗
47. M.P. Liu, H.J. Roven, M.Y. Murashkin, R.Z. Valiev, A. Kilmametov, Z. Zhang, and Y. Yu: J. Mater. Sci., 2013, vol. 48, pp. 4681-88.10.1007/s10853-012-7133-4 ↗
48. X.G. Qiao, M.J. Starink, and N. Gao: Acta Mater., 2010, vol. 58, pp. 3690-3700.10.1016/j.actamat.2010.03.004 ↗
49. X.G. Qiao, N. Gao, and M.J. Starink: Philos. Mag., 2012, vol. 92, pp. 446-70.10.1080/14786435.2011.616865 ↗
50. A.C. Hall, D. Cook, R. Neiser, T. Roemer, and D. Hirschfeld: J. Therm. Spray Technol., 2006, vol. 15, pp. 233-38.10.1361/105996306X108138 ↗
51. L. Ajdelsztajn, A. Zuniga, B. Jodoin, and E. Lavernia: J. Therm. Spray Technol., 2006, vol. 15, pp. 184-90.10.1361/105996306X107995 ↗
52. H. Lee, H. Shin, S. Lee, and K. Ko: Mater. Lett., 2008, vol. 62, pp. 1579-81.10.1016/j.matlet.2007.09.026 ↗
53. T. Van Steenkiste, J. Smith, and R. Teets: Surf. Coat. Technol., 2002, vol. 154, pp. 237-52.10.1016/S0257-8972(02)00018-X ↗
54. R. Huang, M. Sone, W. Ma, and H. Fukanuma: Surf. Coat. Technol., 2015, vol. 261, pp. 278-88.10.1016/j.surfcoat.2014.11.017 ↗