Selective Oxidation of a C-2Mn-1.3Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Heat Treatments
Source abstract
Abstract
The influence of oxygen partial pressure and annealing time on the selective oxidation of a Fe-0.1C-2Mn-1.3Si (wt pct) advanced high-strength steel during intercritical annealing was investigated. The steel was intercritically annealed at 1093 K (820 °C) for annealing times in the range of 60 to 600 seconds in a N2-5 vol pct H2 gas atmosphere with dew points ranging from 223 K to 278 K (− 50 °C to + 5 °C). The morphology, thickness, and chemistry of the oxides were determined as a function of process atmosphere oxygen partial pressure and annealing time by means of SEM, XPS, and TEM. It was found that for the 223 K (− 50 °C) dew point atmosphere, a compact, film-like external oxide comprising MnSiO3, Mn2SiO4, and SiO2 and nodule-like MnO oxides covered the surface. On the other hand, for the 278 K (+ 5 °C) dew point atmosphere, MnSiO3, Mn2SiO4, and MnO nodule/plate-like external oxides were formed, while Si was oxidized internally. Longer annealing times resulted in increasing either the thickness of the external oxide layer or the depth of internal oxidation. A comparison between the predictions of the Wagner internal-to-external transition model found good agreement between the experimental results for Mn and Si in ferrite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. C.M. Tamarelli: The Evolving Use of Advanced High-Strength Steels for Automotive Applications, Michigan, 2011.
2. [2] H. Liu, F. Li, W. Shi, S. Swaminathan, Y. He, M. Rohwerder, and L. Li: Surf. Coatings Technol., 2012, vol. 206, pp. 3428–36.10.1016/j.surfcoat.2012.02.001 ↗
3. [3] S-K. Lee, J-S. Kim, N. Kang, and K-M. Cho: Met. Mater. Int., 2012, vol. 18, pp. 951–56.10.1007/s12540-012-6006-3 ↗
4. [4] S-K. Lee, J-S. Kim, J-W. Choi, N. Kang, and K-M. Cho: Met. Mater. Int., 2011, vol. 17, pp. 251–57.10.1007/s12540-011-0411-x ↗
5. [5] X. Vanden Eynde, J.P. Servais, and M. Lamberigts: Surf. Interface Anal., 2003, vol. 35, pp. 1004–14.10.1002/sia.1639 ↗
6. [6] E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1539–53.10.1007/s11661-010-0192-8 ↗
7. S. Alibeigi: McMaster University, 2014.
8. [8] L. Cho, S.J. Lee, M.S. Kim, Y.H. Kim, and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 362–71.10.1007/s11661-012-1392-1 ↗
9. [9] L. Cho, G.S. Jung, and B.C. De Cooman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5158–72.10.1007/s11661-014-2442-7 ↗
10. E.M. Bellhouse: McMaster University, 2010.
11. [11] J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–8.10.1007/s11661-001-1042-5 ↗
12. I. Parezanović: Rheinisch-Westfälische Technische Hochschule Aachen, 2005.
13. [13] E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2426–41.10.1007/s11661-011-0983-6 ↗
14. [14] M. Norden, M. Blumenau, T. Wuttke, and K-J. Peters: Appl. Surf. Sci., 2013, vol. 271, pp. 19–31.10.1016/j.apsusc.2012.12.103 ↗
15. [15] E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1460–73.10.1007/s11661-010-0185-7 ↗
16. [16] G.M. Song, T. Vystavel, N. van der Pers, J.T.M De Hosson, and W.G. Sloof: Acta Mater., 2012, vol. 60, pp. 2973–81.10.1016/j.actamat.2012.02.003 ↗
17. [17] E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2753–68.10.1007/s11661-011-0685-0 ↗
18. [18] R. Khondker, A. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗
19. [19] R. Kavitha and J.R. McDermid: Surf. Coatings Technol., 2012, vol. 212, pp. 152–58.10.1016/j.surfcoat.2012.09.038 ↗
20. [20] R. Sagl, A. Jarosik, D. Stifter, and G. Angeli: Corros. Sci., 2013, vol. 70, pp. 268–75.10.1016/j.corsci.2013.01.039 ↗
21. Y.F. Gong, T.J. Song, H.S. Kim, J.H. Kwak, and B.C. De Cooman: in Asia-Pacific Galvaniz. Conf., Seoul, 2009.
22. [22] M. Blumenau, M. Norden, F. Friedel, and K. Peters: Surf. Coat. Technol., 2011, vol. 205, pp. 3319–27.10.1016/j.surfcoat.2010.11.053 ↗
23. [23] C. Wagner: Zh. Elektrochem., 1959, vol. 63, pp. 772–82.
24. [24] R.A. Rapp: Corrosion, 1965, vol. 21, pp. 382–401.10.5006/0010-9312-21.12.382 ↗
25. [25] V.A. Lashgari, C. Kwakernaak, and W.G. Sloof: Oxid. Met., 2014, vol. 81, pp. 435–51.10.1007/s11085-013-9456-1 ↗
26. J.M. Mataigne, M. Lamberigts, and V. Leroy: in Development of Annealing Sheet Steels, R. Pradhan and I. Gupta, eds., Minerals, Metals & Materials Society, Pittsburgh, 1992, pp. 511–28.
27. [27] H. Liu, Y. He, S. Swaminathan, M. Rohwerder, and L. Li: Surf. Coatings Technol., 2011, vol. 206, pp. 1237–43.10.1016/j.surfcoat.2011.08.038 ↗
28. T.L. Baum, R.J. Fruehan, and S. Sridhar: Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 2007, vol. 38, pp. 287–97.10.1007/s11663-007-9023-8 ↗
29. [29] A.P. Grosvenor, E.M. Bellhouse, A. Korinek, M. Bugnet, and J.R. McDermid: Appl. Surf. Sci., 2016, vol. 379, pp. 242–48.10.1016/j.apsusc.2016.03.235 ↗
30. [30] B.R. Strohmeier and D.M. Hercules: J. Phys. Chem., 1984, vol. 88, pp. 4929–92.10.1021/j150665a026 ↗
31. [31] J. Finster: Surf. Interface Anal., 1988, vol. 12, pp. 309–14.10.1002/sia.740120507 ↗
32. [32] L. Laffont and P. Gibot: Mater. Charact., 2010, vol. 61, pp. 1268–73.10.1016/j.matchar.2010.09.001 ↗
33. [33] H.K. Schmid and W. Mader: Micron, 2006, vol. 37, pp. 426–32.10.1016/j.micron.2005.12.004 ↗
34. [34] C.C. Ahnn and O.L. Krivanek: EELS Atlas, Gatan Inc., Warrendale, 1983.
35. G. Seyed Mousavi and J.R. McDermid: in Int. Conf. Zinc Zinc Alloy Coat. Steel Sheet, 2017, pp. 485–92.
36. [36] Y.F. Gong, H.S. Kim, and B.C. De Cooman: ISIJ Int., 2009, vol. 49, pp. 557–63.10.2355/isijinternational.49.557 ↗
37. [37] M. Blumenau, M. Norden, F. Friedel, and K. Peters: Surf. Coatings Technol., 2011, vol. 206, pp. 559–67.10.1016/j.surfcoat.2011.07.088 ↗
38. [38] V.A. Lashgari, G. Zimbitas, C. Kwakernaak, and W.G. Sloof: Oxid. Met., 2014, vol. 82, pp. 249–69.10.1007/s11085-014-9490-7 ↗
39. [39] Y.F. Gong, H.S. Kim, and B.C. De Cooman: ISIJ Int., 2008, vol. 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗
40. [40] D. Huin, P. Flauder, and J.B. Leblond: Oxid. Met., 2005, vol. 64, pp. 131–67.10.1007/s11085-005-5718-x ↗
41. [41] Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, and S. Yamaguchi: ISIJ Int., 2009, vol. 49, pp. 564–73.10.2355/isijinternational.49.564 ↗
42. [42] A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
43. [43] M. Guttmann: Mater. Sci. Forum, 1994, vol. 155–156, pp. 527–48.10.4028/www.scientific.net/MSF.155-156.527 ↗
44. [44] J. Maki, J. Mahieu, B.C. De Cooman, and S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125–31.10.1179/026708303225009300 ↗
45. [45] Y. Takada, S. Shimada, J. Lee, M. Kurosaki, and T. Tanaka: ISIJ Int., 2009, vol. 49, pp. 100–104.10.2355/isijinternational.49.100 ↗
46. [46] Y. Kim, M. Shin, C. Tang, and J. Lee: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 872–75.10.1007/s11663-010-9366-4 ↗
47. [47] S. Alibeigi, R. Kavitha, R.J. Meguerian, and J.R. McDermid: Acta Mater., 2011, vol. 59, pp. 3537–49.10.1016/j.actamat.2011.02.027 ↗
48. [48] M. Pourmajidian and J.R. Mcdermid: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1795–1808.10.1007/s11661-018-4513-7 ↗
49. C. Horvath, C. Matthew Enloe, J. Coryell, J.P. Singh, and General Motors Co.: in Proc. Int. Symp. New Dev. Adv. High-Strength Sheet Steels, Warrendale, 2017, pp. 1–10.