Evolution of Pearlite Microstructure in Low-Carbon Cast Microalloyed Steel Due to the Addition of La and Ce
Source abstract
Abstract
The effects of rare earth elements (RE) addition on the pearlite microstructure in low-carbon microalloyed steels have been investigated under two heat treatment conditions: (1) a normalizing treatment (as a conventional heat treatment used industrially to obtain the final mechanical properties of such steels), and (2) an isothermal treatment at 650 °C. This research reports the following effects due to the addition of RE: (i) refinement of the nodule and colony size of pearlite along with the ferrite grain size in the normalized condition, without a significant change in the volume fraction of pearlite. This microstructural refinement observed at room temperature is a consequence of the refinement of cast and austenitic microstructures formed during cooling in the presence of RE; (ii) the interlamellar spacing of pearlite isothermally transformed at 650 °C, as observed by SEM and TEM, is effectively reduced in the RE-added steel. This is likely due to two different effects combined: (i) direct influence of RE on atom carbon diffusion; and (ii) pearlite growth being boundary diffusion controlled by RE partitioning.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. B. L. Bramfitt: in Materials Selection and Design, ASM Handbook, J. R. Davis, ed., ASM International, Ohio, 1998, pp. 153–73.
2. 2. M. M. Aranda, B. Kim, R. Rementeria, C. Capdevila and C. García de Andrés, Metall. Mater. Trans. A 2014, vol. 45, pp. 1778-1786.10.1007/s11661-013-1996-0 ↗
3. 3. C. Capdevila, F. G. Caballero and C. García de Andrés, Acta Mater. 2002, vol. 50, pp. 4629-4641.10.1016/S1359-6454(02)00314-2 ↗
4. 4. F. P. L. Kavishe and T. J. Baker, Mater. Sci. Technol. 1986, vol. 2, pp. 816-822.10.1179/mst.1986.2.8.816 ↗
5. 5. F. G. Caballero, C. Capdevila and C. Garcia de Andres, Scr. Mater. 2000, vol. 42, pp. 537-542.10.1016/S1359-6462(99)00398-X ↗
6. 6. A. M. Elwazri, P. Wanjara and S. Yue, Mater. Sci. Eng., A 2005, vol. 404, pp. 91-98.10.1016/j.msea.2005.05.051 ↗
7. 7. K. K. Ray and D. Mondal, Acta Metall. Mater. 1991, vol. 39, pp. 2201-2208.10.1016/0956-7151(91)90002-I ↗
8. B. Chokkalingam, S. S. MohamedNazirudeen and S. S. Ramakrishnan, Mater Tehnol. 2011, 45: 159-162.
9. 9. K. Nakase and I. M. Bernstein, Metall. Trans. A 1988, vol. 19, pp. 2819-2829.10.1007/BF02645816 ↗
10. 10. O. P. Modi, N. Deshmukh, D. P. Mondal, A. K. Jha, A. H. Yegneswaran and H. K. Khaira, Mater. Charact. 2001, vol. 46, pp. 347-352.10.1016/S1044-5803(00)00113-3 ↗
11. 11. J. C. M. Li and Y. T. Chou, Metall. Mater. Trans. B 1970, vol. 1, pp. 1145-1159.10.1007/BF02900225 ↗
12. 12. B. Garbarz and F. B. Pickering, Mater. Sci. Technol. 1988, vol. 4, pp. 328-334.10.1179/mst.1988.4.4.328 ↗
13. 13. Y. Liang, Z. Y. Shi and Y. L. Liang, Adv Mat Res. 2013, vol. 734-737, pp. 1531-1535.10.4028/www.scientific.net/AMR.734-737.1531 ↗
14. 14. R.E. Smallman and R. J. Bishop, In Modern Physical Metallurgy and Materials Engineering (Sixth Edition), (Butterworth-Heinemann: Oxford, 1999), pp 259-296.10.1016/B978-075064564-5/50008-2 ↗
15. 15. A. R. Marder and B. L. Bramfitt, Metall. Trans. A 1975, vol. 6, pp. 2009-2014.10.1007/BF03161825 ↗
16. 16. A. R. Marder and B. L. Bramfitt, Metall. Trans. A 1976, vol. 7, pp. 365-372.10.1007/BF02642832 ↗
17. 17. N. Ridley, Metall. Trans. A 1984, vol. 15, pp. 1019-1036.10.1007/BF02644694 ↗
18. 18. A. M. Elwazri, P. Wanjara and S. Yue, Mater. Charact. 2005, vol. 54, pp. 473-478.10.1016/j.matchar.2005.02.002 ↗
19. 19. J. Toribio, B. González, J.-C. Matos and F.-J. Ayaso, Metals 2016, vol. 6, pp. 1-12.
20. M. Wang, F. Zhang and Z. Yang, Mater. Sci. Technol. 2017, 79:1-8.
21. 21. C. Zener, Trans. AIME 1946, vol. 167, pp. 550-595.
22. 22. F. G. Caballero, C. Capdevila and C. García de Andrés, Mater. Sci. Technol. 2001, vol. 17, pp. 686-692.10.1179/026708301101510401 ↗
23. H. Bhadeshia and R. Honeycombe, Steels: Microstructure and Properties, Butterworth-Heinemann, Oxford, 2017, pp 101-34.10.1016/B978-0-08-100270-4.00004-4 ↗
24. 24. R. C. Sharma, G. R. Purdy and J. S. Kirkaldy, Metall. Trans. A 1979, vol. 10, pp. 1129-1139.10.1007/BF02811658 ↗
25. 25. S.K. Tewari and C.R. Sharma, Metall. Trans. A 1985, vol. 16, pp. 597-603.10.1007/BF02814233 ↗
26. 26. J. Fridberg and M. Hillert, Acta Metall 1970, vol. 18, pp. 1253-1260.10.1016/0001-6160(70)90155-0 ↗
27. 27. C. R. Hutchinson, R.E. Hackenberg and G. J. Shiflet, Acta Mater. 2004, vol. 52, pp. 3565-3585.10.1016/j.actamat.2004.04.010 ↗
28. 28. H. L. Liu, C. J. Liu and M. F. Jiang, Mater. Des 2012, vol. 33, pp. 306-312.10.1016/j.matdes.2011.06.042 ↗
29. 29. W. Lu, H. Liu, T. Y. Hsu and Z. Xu, Scr Metall Mater 1993, vol. 29, pp. 273-274.10.1016/0956-716X(93)90321-I ↗
30. 30. L. Wang, Q. Lin, J. Ji and D. Lan, J. Alloys Compd. 2006, vol. 408–412, pp. 384-386.10.1016/j.jallcom.2005.04.090 ↗
31. 31. L. M. Wang, Q. Lin, L. J. Yue, L. Liu, F. Guo and F. M. Wang, J. Alloys Compd. 2008, vol. 451, pp. 534-537.10.1016/j.jallcom.2007.04.234 ↗
32. 32. T. Y. Hsu, SIJ Int. 1998, vol. 38, pp. 1153-1164.
33. 33. C. J. Liu, Y. H. Huang and M. F. Jiang, Adv Mat Res. 2011, vol. 194-196, pp. 137-242.10.4028/www.scientific.net/AMR.189-193.137 ↗
34. 34. C. Liu, Y. Huang and M. Jiang, J. Iron & Steel Res. Int. 2011, vol. 18, pp. 52-58.10.1016/S1006-706X(11)60037-X ↗
35. 35. C. Garcia, L. F. Alvarez and M. Carsi, Welding International 1992, vol. 6, pp. 612-621.10.1080/09507119209548251 ↗
36. R.E. Dunin-Borkowski, J. Sloan, R.R. Meyer, A.I. Kirkland, and J.L. Hutchison, European JEOL Users Meeting, Jena, Germany 25-26 September 2000 (http://www.rafaldb.com/papers/A-2000-09-Jena-JEOL-users-meeting-JEM-3000F-results.pdf ).
37. E. E. Underwood: Quantitative stereology, Addison-Wesley Pub. Co., Atlanta, 1970, pp. 73-75.
38. G. F. VanderVoort and A. Roósz, Metallography 1984, vol. 17, pp. 1-17.10.1016/0026-0800(84)90002-8 ↗
39. 39. H. Petitgand, D. Benoit, M. Moukassi and B. Debyser, SIJ Int. 1990, vol. 30, pp. 546-551.
40. 40. F. G. Caballero, C. Garcia de Andres and C. Capdevila, Mater. Charact. 2000, vol. 45, pp. 111-116.10.1016/S1044-5803(00)00056-5 ↗
41. 41. C. Yang, W. Zhang, H. Li, X. Chen and Q. Zhai, In Characterization of Minerals, Metals, and Materials 2015, (Springer International Publishing: Cham, 2016), pp. 601-606.
42. 42. D. San Martín, Y. Palizdar, R. C. Cochrane, R. Brydson and A. J. Scott, Mater. Charact. 2010, vol. 61, pp. 584-588.10.1016/j.matchar.2010.03.001 ↗
43. H. Torkamani, Sh. Raygan, C. Garcia Mateo, J. Rassizadehghani, Y. Palizdar, and D. San-Martin: Met. Mater. Int., 2018.
44. 44. D. San Martín, T. de Cock, A. García-Junceda, F. G. Caballero, C. Capdevila and C. García de Andrés, Mater. Sci. Technol. 2008, vol. 24, pp. 266-272.10.1179/174328408X265640 ↗
45. 45. E. Kalinushkin, I. Mamuzic, Yu. Taran and L. Tykhonuk, METALURGIJA 2002, vol. 41 (3), pp. 131-138.
46. 46. M. Wintz, M. Bobadilla, J. Lehmann and H. Gaye, SIJ Int. 1995, vol. 35, pp. 715-722.
47. 47. Sh. Morioka and H. Suito, SIJ Int. 2008, vol. 48, pp. 286-293.
48. 48. H. Suito, H. Ohta and S. Morioka, SIJ Int. 2006, vol. 46, pp. 840-846.
49. 49. G. Muxing and S. Hideaki, SIJ Int. 1999, vol. 39, pp. 1289-1296
50. 50. R. Tuttle, IJMC 2012, vol. 6, pp. 51-65.
51. 51. J. Lan, J. He, W. Ding, Q. Wang and Y. Zhu, SIJ Int. 2000, vol. 40, pp. 1275-1282.
52. 52. J. Gao, P. Fu, H. Liu and D. Li, Metals 2015, vol. 5, pp. 383-394.10.3390/met5010383 ↗
53. 53. H. Torkamani, Sh. Raygan, C. Garcia Mateo, J. Rassizadehghani, J. Vivas, Y. Palizdar and D. San-Martin, Metals 2017, vol. 7, pp. 377-395.10.3390/met7090377 ↗
54. 54. N. Fujiyama, T. Nishibata, A. Seki, H. Hirata, K. Kojima and K. Ogawa, Science and Technology of Advanced Materials 2017, vol. 18, pp. 88-95.10.1080/14686996.2016.1244473 ↗
55. 55. Z. Adabavazeh, W. S. Hwang and A. Dezfoli, Crystals 2017, vol. 7, pp. 308-317.10.3390/cryst7100308 ↗
56. 56. F. Pan, J. Zhang, H. L. Chen, Y. H. Su, C. L. Kou, Y. H. Su, S. H. Chen, K. J. Lin, P. H. Hsieh and W. S. Hwang, Materials 2016, vol. 9, pp. 417-436.10.3390/ma9060417 ↗
57. 57. Zh. Q. Liu, G. Miyamoto, Zh. G. Yang and T. Furuhara, Metall. Mater. Trans. A 2013, vol. 44, pp. 5456-5467.10.1007/s11661-013-1885-6 ↗
58. 58. M. Umemoto, Z. Hai Guo and I. Tamura, Mater. Sci. Technol. 1987, vol. 3, pp. 249-255.10.1179/mst.1987.3.4.249 ↗
59. 59. M. Hillert, Jernkontorets. Ann 1957, vol. 141, pp. 757-746.
60. 60. M. Hillert: The mechanism of phase transformation in crystalline solids. (Institute of Metals., London, 1969).
61. A.C. Reardon: Metallurgy for the Non-Metallurgist, Second Edition. (ASM International, Ohio, 2011).10.31399/asm.tb.mnm2.9781627082617 ↗
62. 62. T. Sakuma and R. W. K. Honeycombe, Mater. Sci. Technol. 1985, vol. 1, pp. 351-356.10.1179/mst.1985.1.5.351 ↗
63. 63. C. Capdevila, F. G. Caballero and C. Garcia de Andres, SIJ Int. 2005, vol. 45, pp. 229-237.
64. M. Atkins: Atlas of Continuous Cooling Transformation Diagrams for Engineering Steels. (American Society for Metals, Ohio, 1980).
65. S.-J. Lee, D. K. Matlock and C. J. Van Tyne, Scr. Mater. 2011, vol. 64, pp. 805-808.10.1016/j.scriptamat.2011.01.001 ↗
66. 66. M. Martin-Aranda, R. Rementeria, R. Hackenberg, E. Urones-Garrote, S. P. Tsai, J. R. Yang and C. Capdevila, Materials 2016, vol. 9, pp. 998-1008.10.3390/ma9120998 ↗
67. 67. M. Honjo, T. Kimura and K. Hase, SIJ Int. 2016, vol. 56, pp. 161-167.
68. 68. Y. Wu, L. Wang and T. Du, JLCM 1985, vol. 110, pp. 187-193.
69. 69. S. A. Al-Salman, G. W. Lorimer and N. Ridley, Metall. Trans. A 1979, vol. 10, pp. 1703-1709.10.1007/BF02811704 ↗
70. 70. D. E. Coates, Metall. Trans. 1972, vol. 3, pp. 1203-1212.10.1007/BF02642453 ↗
71. 71. D. E. Coates, Metall. Trans. 1973, vol. 4, pp. 1077-1086.10.1007/BF02645611 ↗
72. 72. S. J. Lee, D. K. Matlock and Ch. J. Van Tyne, SIJ Int. 2011, vol. 51, pp. 1903-1911.
73. 73. X. Gao, H. Ren, C. Li, H. Wang, Y. Ji and H. Tan, J. Alloys Compd. 2016, vol. 663, pp. 316-320.10.1016/j.jallcom.2015.12.129 ↗
74. D.E. Laughlin and K. Hono: Physical Metallurgy. Fifth ed. (Elsevier, Amsterdam, 2014).
75. 75. J. W. Cahn, Acta Metall 1959, vol. 7, pp. 18-28.10.1016/0001-6160(59)90164-6 ↗
76. 76. G. R. Speich and A. Szirmae, Trans. TMS-AIME 1969, vol. 245, pp. 1063–1074
77. 77. A. Jacot, M. Rappaz and R. C. Reed, Acta Mater. 1998, vol. 46, pp. 3949-3962.10.1016/S1359-6454(98)00048-2 ↗
78. 78. B. E. Sundquist, Acta Metall 1968, vol. 16, pp. 1413-1427.10.1016/0001-6160(68)90037-0 ↗
79. 79. B. E. Sundquist, Acta Metall 1969, vol. 17, pp. 967-978.10.1016/0001-6160(69)90041-8 ↗