Production and Corrosion Resistance of Thermally Sprayed Fe-Based Amorphous Coatings from Mechanically Milled Feedstock Powders
Source abstract
Abstract
Mechanically milled FeCrNbB feedstock powders from commercial precursors were used to produce amorphous coatings through two different industrial thermal-spraying techniques: high-velocity oxygen fuel (HVOF) and flame spraying. Microstructure, thermal behavior, and hardness of the coatings and their corrosion resistances in acidic and alkaline chloride-rich media were comparatively studied. HVOF process was effective to produce ~ 200-µm-thick highly amorphous coatings with hardness over than 700 HV0.3 and low porosity (~ 5 pct). Flame-sprayed ~ 220-µm-thick coatings were nanocrystalline, composed of α-Fe, Fe2B, FeNbB, and Fe2O3 phases and presented hardness of 564 HV0.3 and ~ 10 pct porosity. Electrochemical measurements indicated that HVOF coatings exhibit higher corrosion resistance than flame-sprayed ones thanks to the higher amorphous content and lower porosity resulting from the former processing route. Electrochemical impedance spectroscopy results demonstrated that amorphous HVOF Fe60Cr8Nb8B24 (at. pct) coatings are interesting to protect mild steels such as the API 5L X80 against corrosion in chloride-rich environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. A. Inoue and X.M. Wang: Acta Mater., 2000, vol. 48, pp. 1383–95.10.1016/S1359-6454(99)00394-8 ↗
2. Z.P. Lu, C.T. Liu, J.R. Thompson, and W.D. Porter: Phys. Rev. Lett., 2004, vol. 92, pp. 245503–1.
3. V. Ponnambalam, S.J. Poon, and G.J. Shiflet: J. Mater. Res., 2004, vol. 19, 19.10.1557/JMR.2004.0176 ↗
4. J. Pan, Q. Chen, N. Li, and L. Liu: J. Alloys Compd., 2008, vol. 463, pp. 246–9.10.1016/j.jallcom.2007.09.124 ↗
5. A. Inoue and A. Takeuchi: Acta Mater., 2011, vol. 59, 2243-2267.10.1016/j.actamat.2010.11.027 ↗
6. W.J. Botta, J.E. Berger, C.S. Kiminami, V. Roche, R.P. Nogueira, and C. Bolfarini: J. Alloys Compd., 2014, vol. 586, pp. S105–10.10.1016/j.jallcom.2012.12.130 ↗
7. M. Ashby and A. Greer: Scr. Mater., 2006, vol. 54, pp. 321–6.10.1016/j.scriptamat.2005.09.051 ↗
8. C. Suryanarayana and A. Inoue: Int. Mater. Rev., 2013, vol. 58, pp. 131–66.10.1179/1743280412Y.0000000007 ↗
9. A.L. Greer, K.L. Rutherford, and I.M. Hutchings: Int. Mater. Rev., 2002, vol. 47, pp. 87–112.10.1179/095066001225001067 ↗
10. X.Q. Liu, Y.G. Zheng, X.C. Chang, W.L. Hou, and J.Q. Wang: Mater. Sci. Forum, 2009, vol. 633–634, pp. 685–94.10.4028/www.scientific.net/MSF.633-634.685 ↗
11. M.J. Duarte, S. Klemm, S. Borodin, P. Keil, K. Mayrhofer, M. Stratmann, A.H. Romero, D. Crespo, J. Serrano, P. Choi, S.S.A. Gerstl, D. Raabe, and F.U. Renner: in Scientific Report 2009/2010, R. Loschen and F. Stein, eds., Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, 2010, p. 192.
12. G.Y. Koga, R. Schulz, S. Savoie, A.R.C. Nascimento, Y. Drolet, C. Bolfarini, C.S. Kiminami, and W.J. Botta: Surf. Coatings Technol., 2017, vol. 309, pp. 938–44.10.1016/j.surfcoat.2016.10.057 ↗
13. R.Q. Guo, C. Zhang, Q. Chen, Y. Yang, N. Li, and L. Liu: Corros. Sci., 2011, vol. 53, pp. 2351–6.10.1016/j.corsci.2010.12.022 ↗
14. Z. Zhou, L. Wang, D.Y. He, F.C. Wang, and Y.B. Liu: J. Therm. Spray Technol., 2010, vol. 19, pp. 1287–93.10.1007/s11666-010-9556-2 ↗
15. C. Zhang, L. Liu, K.C. Chan, Q. Chen, and C.Y. Tang: Intermetallics, 2012, vol. 29, pp. 80–85.10.1016/j.intermet.2012.05.004 ↗
16. H.S. Ni, X.H. Liu, X.C. Chang, W.L. Hou, W. Liu, and J.Q. Wang: J. Alloys Compd., 2009, vol. 467, pp. 163–7.10.1016/j.jallcom.2007.11.133 ↗
17. J.M. Guilemany, J. Fernández, N. Espallargas, P.H. Suegama, and A.V. Benedetti: Surf. Coatings Technol., 2006, vol. 200, pp. 3064–72.10.1016/j.surfcoat.2005.02.116 ↗
18. J. Cheney and K. Vecchio: Mater. Sci. Eng. A, 2008, vol. 492, pp. 230–5.10.1016/j.msea.2008.03.019 ↗
19. Y. Guo, G.Y. Koga, A. Moreira Jorge Jr., S. Savoie, R. Schulz, C. Kiminami, C. Bolfarini, and W.J. Botta: Mater. Des., 2016, vol. 111, pp. 608–15.10.1016/j.matdes.2016.09.027 ↗
20. G.Y. Koga, R.P. Nogueira, V. Roche, A.R. Yavari, A.K. Melle, J. Gallego, C. Bolfarini, C.S. Kiminami, and W.J. Botta: Surf. Coatings Technol., 2014, vol. 254, pp. 238–43.10.1016/j.surfcoat.2014.06.022 ↗
21. J.B. Cheng, Z.H. Wang, and B.S. Xu: J. Therm. Spray Technol., 2012, vol. 21, pp. 1025–31.10.1007/s11666-012-9779-5 ↗
22. S. Alleg, M. Ibrir, N.E. Fenineche, R. Bensalem, and J.J. Suñol: Surf. Coatings Technol., 2010, vol. 205, pp. 281–6.10.1016/j.surfcoat.2010.06.042 ↗
23. Y. Wu, P. Lin, Z. Wang, and G. Li: J. Alloys Compd., 2009, vol. 481, pp. 719–24.10.1016/j.jallcom.2009.03.099 ↗
24. D. Zois, A. Lekatou, M. Vardavoulias, and A. Vazdirvanidis: J. Alloys Compd., 2010, vol. 495, pp. 611–6.10.1016/j.jallcom.2009.10.055 ↗
25. G. Liu, Y. An, Z. Guo, J. Chen, G. Hou, and J. Chen: Appl. Surf. Sci., 2012, vol. 258, pp. 5380–6.10.1016/j.apsusc.2012.02.015 ↗
26. J. Cheng, X. Liang, B. Xu, and Y. Wu: J. Non. Cryst. Solids, 2009, vol. 355, pp. 1673–8.10.1016/j.jnoncrysol.2009.06.024 ↗
27. W. Guo, J. Zhang, Y. Wu, S. Hong, and Y. Qin: Mater. Des., 2015, vol. 78, pp. 118–24.10.1016/j.matdes.2015.04.027 ↗
28. C. Zhang, R.Q. Guo, Y. Yang, Y. Wu, and L. Liu: Electrochim. Acta, 2011, vol. 56, pp. 6380–8.10.1016/j.electacta.2011.05.020 ↗
29. Y. Wu, P. Lin, G. Xie, J. Hu, and M. Cao: Mater. Sci. Eng. A, 2006, vol. 430, pp. 34–9.10.1016/j.msea.2006.05.095 ↗
30. H.W. Jin, Y.M. Rhyim, S.G. Hong, and C.G. Park: Mater. Sci., 2001, vol. 306, pp. 1069–74.
31. J. Voyer: J. Therm. Spray Technol., 2010, vol. 19, pp. 1013–23.10.1007/s11666-010-9495-y ↗
32. B. Uyulgan, E. Dokumaci, E. Celik, I. Kayatekin, N.F. Ak Azem, I. Ozdemir, and M. Toparli: J. Mater. Process. Technol., 2007, vol. 190, pp. 204–10.10.1016/j.jmatprotec.2007.02.044 ↗
33. S.D. Zhang, J. Wu, W.B. Qi, and J.Q. Wang: Corros. Sci., 2016, vol. 110, pp. 57–70.10.1016/j.corsci.2016.04.021 ↗
34. Y. Huang, Y. Guo, H. Fan, and J. Shen: Mater. Lett., 2012, vol. 89, pp. 251–3.10.1016/j.matlet.2012.08.114 ↗
35. Z. Zhou, L. Wang, F.C. Wang, H.F. Zhang, Y.B. Liu, and S.H. Xu: Surf. Coatings Technol., 2009, vol. 204, pp. 563–70.10.1016/j.surfcoat.2009.08.025 ↗
36. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
37. J.C. Farmer, J.J. Haslam, S.D. Day, T. Lian, C.K. Saw, P.D. Hailey, J.-S. Choi, R.B. Rebak, N. Yang, J.H. Payer, J.H. Perepezko, K. Hildal, E.J. Lavernia, L. Ajdelsztajn, D.J. Branagan, E.J. Buffa, and L.F. Aprigliano: J. Mater. Res., 2007, vol. 22, pp. 2297–2311.10.1557/jmr.2007.0291 ↗
38. S.J. Pang, T. Zhang, K. Asami, and A. Inoue: Acta Mater., 2002, vol. 50, pp. 489–97.10.1016/S1359-6454(01)00366-4 ↗
39. V. Ponnambalam, S.J. Poon, and G.J. Shiflet: J. Mater. Res., 2004, vol. 19, pp. 3046–52.10.1557/JMR.2004.0374 ↗
40. S. Sharma and C. Suryanarayana: J. Appl. Phys., 2008, vol. 103, p. 13504.10.1063/1.2828152 ↗
41. X.J. Gu, S.J. Poon, and G.J. Shiflet: Scr. Mater., 2007, vol. 57, pp. 289–92.10.1016/j.scriptamat.2007.05.006 ↗
42. J. Balogh, T. Kemeny, I. Vincze, L. Bujdoso, L. Toth, and G. Vincze: J. Appl. Phys., 1995, vol. 77, pp. 4997–5003.10.1063/1.359522 ↗
43. N. Al-Aqeeli, M.A. Hussein, and C. Suryanarayana: Adv. Powder Technol., 2015, vol. 26, pp. 385–91.10.1016/j.apt.2014.11.008 ↗
44. F.Q. Guo and K. Lu: Metall. Mater. Trans. A, 1997, vol. 28, pp. 1123–31.10.1007/s11661-997-0278-0 ↗
45. K. Lu and J.T. Wang: Mater. Sci. Eng. A, 1991, vol. 133, pp. 500–03.10.1016/0921-5093(91)90119-8 ↗
46. B. Yao, S.E. Liu, L. Liu, L. Si, W.H. Su, and Y. Li: J. Appl. Phys., 2001, vol. 90, pp. 1650–4.10.1063/1.1385354 ↗
47. W. Yuping, L. Pinghua, C. Chenglin, W. Zehua, C. Ming, and H. Junhua: Mater. Lett., 2007, vol. 61, pp. 1867–72.10.1016/j.matlet.2006.07.147 ↗
48. H. Miura, S. Isa, K. Omuro, and N. Tanigami: Trans. Japan Inst. Met., 1981, vol. 22, pp. 597–606.10.2320/matertrans1960.22.597 ↗
49. Y. Wang, S.L. Jiang, Y.G. Zheng, W. Ke, W.H. Sun, and J.Q. Wang: Surf. Coatings Technol., 2011, vol. 206, pp. 1307–18.10.1016/j.surfcoat.2011.08.045 ↗
50. S.D. Zhang, W.L. Zhang, S.G. Wang, X.J. Gu, and J.Q. Wang: Corros. Sci., 2015, vol. 93, pp. 211–21.10.1016/j.corsci.2015.01.022 ↗
51. M.J. Duarte, J. Klemm, S.O. Klemm, K.J.J. Mayrhofer, M. Stratmann, S. Borodin, A.H. Romero, M. Madinehei, D. Crespo, J. Serrano, S.S. Gerstl, P.P. Choi, D. Raabe, F.U. Renner. Science, 2013, vol. 341, pp. 372–6.10.1126/science.1230081 ↗
52. C.A.C. Souza, M.F. de Oliveira, J.E. May, W.J. Botta, N.A. Mariano, S.E. Kuri, and C.S. Kiminami: J. Non-cryst. Solids, 2000, vol. 273, 282-288.10.1016/S0022-3093(00)00174-5 ↗
53. C.A.C. Souza, D. V. Ribeiro, and C.S. Kiminami: J. Non. Cryst. Solids, 2016, vol. 442, pp. 56–66.10.1016/j.jnoncrysol.2016.04.009 ↗
54. P. Córdoba-Torres, T.J. Mesquita, and R.P. Nogueira: Electrochim. Acta, 2013, vol. 92, pp. 323–34.10.1016/j.electacta.2013.01.036 ↗
55. H.H. Hassan, E. Abdelghani, and M.A. Amin: Electrochim. Acta, 2007, vol. 52, pp. 6359–66.10.1016/j.electacta.2007.04.046 ↗
56. H.J.W. Lenderink, M.V.D. Linden, and J.H.W. Wit: Electrochim. Acta, 1993, vol. 38, pp. 1989–92.10.1016/0013-4686(93)80329-X ↗
57. M.A. Veloz and I. Gonzalez: Electrochim. Acta, 2002, vol. 48, pp. 135–44.10.1016/S0013-4686(02)00549-2 ↗
58. F. Farelas, M. Galicia, B. Brown, S. Nesic, and H. Castaneda: Corros. Sci., 2010, vol. 52, pp. 509–17.10.1016/j.corsci.2009.10.007 ↗
59. P. Córdoba-Torres, M. Keddam, and R.P. Nogueira: Electrochim. Acta, 2008, vol. 54, pp. 518–23.10.1016/j.electacta.2008.07.023 ↗
60. B. Huet, R.P. Nogueira, and H. Takenouti: in ASM Handbook, D. Cramer and B.S. Covino Jr, eds., ASM International, Materials Park, Ohio, 2003, pp. 52–60.
61. G.J. Brug, A.L.G. van den Eeden, M. Sluyters-Rehbach, and J.H. Sluyters: J. Electroanal. Chem. Interfacial Electrochem., 1984, vol. 176, pp. 275–95.10.1016/S0022-0728(84)80324-1 ↗