journal article·2018-05Open access

Prediction of Precipitation Strengthening in the Commercial Mg Alloy AZ91 Using Dislocation Dynamics

L. K. Aagesen, J. Miao, J. E. Allison, S. Aubry, A. Arsenlis

Abstract

Dislocation dynamics simulations were used to predict the strengthening of a commercial magnesium alloy, AZ91, due to β-Mg17Al12 formed in the continuous precipitation mode. The precipitate distributions used in simulations were determined based on experimental characterization of the sizes, shapes, and number densities of the precipitates for 10-hour aging and 50-hour aging. For dislocations gliding on the basal plane, which is expected to be the dominant contributor to plastic deformation at room temperature, the critical resolved shear stress to bypass the precipitate distribution was 3.5 MPa for the 10-hour aged sample and 16.0 MPa for the 50-hour aged sample. The simulation results were compared to an analytical model of strengthening in this alloy, and the analytical model was found to predict critical resolved shear stresses that were approximately 30 pct lower. A model for the total yield strength was developed and compared with experiment for the 50-hour aged sample. The predicted yield strength, which included the precipitate strengthening contribution from the DD simulations, was 132.0 MPa, in good agreement with the measured yield strength of 141 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. C. R. Hutchinson, J. F. Nie, and S. Gorsse: . Metall. Mater. Trans. A, 2005, vol. 36A (8), pp. 2093–2105.10.1007/s11661-005-0330-x ↗
2. S. Celotto: Acta Mater., 2000, vol. 48 (8), pp. 1775–1787.10.1016/S1359-6454(00)00004-5 ↗
3. J. Miao, M. Li, and J. E. Allison: in Proceedings of Magnesium 2012, Vancouver, BC, Canada.
4. E. Deda, J. Miao, L.K. Aagesen, T.D. Berman, M. Li, and J.E. Allison: In preparation.
5. J. B. Clark: Acta Metall., 1968, vol. 16 (2), pp. 141–152.10.1016/0001-6160(68)90109-0 ↗
6. E. Orowan: Symposium on internal stresses in metals and alloys, Institute of Metals, London, 1948, pp. 451–452.
7. M. F. Ashby: Acta Metall., 1966, vol. 14 (5), pp. 679–681.10.1016/0001-6160(66)90074-5 ↗
8. A. J. E. Foreman and M. J. Makin: Philos. Mag., 1966, vol. 14 (131), pp. 911–924.10.1080/14786436608244762 ↗
9. A. J. E. Foreman and M. J. Makin: Can. J. Phys., 1967, vol. 45 (2), pp. 511–517.10.1139/p67-044 ↗
10. U. F. Kocks: Scr. Mater., 1967, vol. 45 (2), pp. 737–755.
11. P. B. Hirsch and F. J. Humphreys: Physics of Strength and Plasticity, MIT Press, Cambridge, MA, 1969, p. 189.
12. L. M. Brown and R. K. Ham: Strengthening Methods in Crystals, Elsevier, London, 1971, p. 12.
13. D. J. Bacon, U. F. Kocks, and R. O. Scattergood: Philos. Mag., 1973, vol. 28 (6), pp. 1241–1263.10.1080/14786437308227997 ↗
14. R. B. Schwarz and R. Labusch: J. Appl. Phys., 1978, vol. 49 (10), pp. 5174–5187.10.1063/1.324413 ↗
15. E. Nembach: Particle Strengthening of Metals and Alloys, Wiley, New York, 1996.
16. V. Mohles: Mater. Sci. Eng., A, 2001, vol. 309, pp. 265–269.10.1016/S0921-5093(00)01766-4 ↗
17. V. Mohles: . Mag. A, 2001, vol. 81 (4), pp. 971–990.10.1080/01418610108214330 ↗
18. V. Mohles: Philos. Mag. Lett., 2003, vol. 83 (1), pp. 9–19.10.1080/0950083021000048730 ↗
19. G. Monnet: Philos. Mag., 2006, vol. 86 (36), pp. 5927–5941.10.1080/14786430600860985 ↗
20. S. Queyreau and B. Devincre: Philos. Mag. Lett., 2009, vol. 89 (7), pp. 419–430.10.1080/09500830903005433 ↗
21. S. Queyreau, G. Monnet, and B. Devincre: Acta Mater., 2010, vol. 58 (17), pp. 5586–5595.10.1016/j.actamat.2010.06.028 ↗
22. G. Monnet, S. Naamane, and B. Devincre: Acta Mater., 2011, vol. 59 (2), pp. 451–461.10.1016/j.actamat.2010.09.039 ↗
23. M. E. Krug, Z. G. Mao, D. N. Seidman, and D. C. Dunand: Acta Mater., 2014, vol. 79, pp. 382–395.10.1016/j.actamat.2014.06.038 ↗
24. C. Sobie, N. Bertin, and L. Capolungo: Metall. Mater. Trans. A, 2015, vol. 46A (8), pp. 3761–3772.10.1007/s11661-015-2935-z ↗
25. A. Arsenlis, W. Cai, M. Tang, M. Rhee, T. Oppelstrup, G. Hommes, T. G. Pierce, and V. V. Bulatov: Modell. Simul. Mater. Sci. Eng., 2007, vol. 15 (6), pp. 553–595.10.1088/0965-0393/15/6/001 ↗
26. C. S. Roberts: Magnesium and Its Alloys, Wiley, New York, 1960.
27. S. Groh, E.B. Marin, M.F. Horstemeyer, and D.J. Bammann: Modell. Simul. Mater. Sci. Eng., vol. 17(7), 075009 (2009).10.1088/0965-0393/17/7/075009 ↗
28. J. P. Hirth and J. Lothe: Theory of Dislocations, Wiley, New York, 1982.
29. E. Deda, T. D. Berman, and J. E. Allison: Metall. Mater. Trans. A, 2017, vol. 48A (4), pp. 1999–2014.10.1007/s11661-017-3958-4 ↗
30. W. B. Hutchinson and M. R. Barnett: Scr. Mater., 2010, vol. 63 (7), pp. 737–740.10.1016/j.scriptamat.2010.05.047 ↗
31. C. H. Caceres and P. Lukac: Philos. Mag., 2008, vol. 88 (7), pp. 977–989.10.1080/14786430801968611 ↗
32. F. E. Hauser, P. R. Landon, and J. E. Dorn: Trans. Am. Inst. Min. Metall. Eng., 1956, vol. 206 (5), pp. 589–593.
33. C. H. Caceres, G. E. Mann, and J. R. Griffiths: Metall. Mater. Trans. A, 2011, vol. 42A (7), pp. 1950–1959.10.1007/s11661-010-0599-2 ↗
34. J. A. Yasi, L. G. Hector, and D. R. Trinkle: Acta Mater., 2010, vol. 58 (17), pp. 5704–5713.10.1016/j.actamat.2010.06.045 ↗