Effect of Extrusion Temperature on the Plastic Deformation of an Mg-Y-Zn Alloy Containing LPSO Phase Using In Situ Neutron Diffraction
Source abstract
Abstract
The evolution of the internal strains during in situ tension and compression tests has been measured in an MgYZn alloy containing long-period stacking ordered (LPSO) phase using neutron diffraction. The alloy was extruded at two different temperatures to study the influence of the microstructure and texture of the magnesium and the LPSO phases on the deformation mechanisms. The alloy extruded at 623 K (350 °C) exhibits a strong fiber texture with the basal plane parallel to the extrusion direction due to the presence of areas of coarse non-recrystallised grains. However, at 723 K (450 °C), the magnesium phase is fully recrystallised with grains randomly oriented. On the other hand, at the two extrusion temperatures, the LPSO phase orients their basal plane parallel to the extrusion direction. Yield stress is always slightly higher in compression than in tension. Independently on the stress sign and the extrusion temperature, the beginning of plasticity is controlled by the activation of the basal slip system in the dynamic recrystallized grains. Therefore, the elongated fiber-shaped LPSO phase which behaves as the reinforcement in a metal matrix composite is responsible for this tension–compression asymmetry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. A. Inoue, Y. Kawamura, M. Matsushita, K. Hayashi and J. Koike: J. Mater. Res., 2001, vol. 21, pp. 1894-1900.10.1557/JMR.2001.0260 ↗
2. M. Yamasaki, K. Hashimoto, K.Hagihara and Y.Kawamura: Acta Mater., 2011, Vol 59, pp. 3646-3658.10.1016/j.actamat.2011.02.038 ↗
3. G. Garcés, M. Maeso, I. Todd, P. Pérez and P. Adeva: J. Alloys Comp., 2007, vol. 432, pp. L10-L14.10.1016/j.jallcom.2006.06.009 ↗
4. G. Garcés, E. Oñorbe, F. Dobes, P. Pérez, J.M. Antoranz and P. Adeva: Mat. Sci. Eng. A, 2012, vol. 539, pp. 48-55.10.1016/j.msea.2012.01.023 ↗
5. Y. Jono, M. Yamasaki and Y. Kawamura: Mater. Trans., 2013, vol. 54, pp.703-71210.2320/matertrans.MI201218 ↗
6. E. Oñorbe, G. Garcés, F. Dobes, P. Pérez and P. Adeva: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2869-2883.10.1007/s11661-013-1628-8 ↗
7. Y.M. Zhu, A.J. Morton and J.F. Nie: Acta Mater., 2010, vol. 58, pp. 2936-2947.10.1016/j.actamat.2010.01.022 ↗
8. D. Egusa and E. Abe: Acta Mater., 2012, vol. 60, pp. 166-178.10.1016/j.actamat.2011.09.030 ↗
9. M. Hirano, K. Yamasaki, K. Hagihara and Y. Kawamura: Mater. Trans., 2010, vol. 51, pp. 1640-1647.10.2320/matertrans.MAW201026 ↗
10. K. Hagihara, A. Kinoshita, Y. Sugino, M. Yamasaki, Y. Kawamura, H.Y. Yasuda and Y. Umakoshi: Acta Mater., 2010, vol 58,pp. 6282-6293.10.1016/j.actamat.2010.07.050 ↗
11. G. Garces, M.A. Muñoz-Morris, D.G. Morris, P. Perez and P. Adeva: Mater. Sci. Eng. A, 2014, vol. 614, pp. 96-105.10.1016/j.msea.2014.07.012 ↗
12. G. Garces, D.G. Morris, M.A. Muñoz-Morris, P. Perez, D. Tolnai, C. Mendis, A. Stark, H.K. Lim, S. Kim, N. Shell and P. Adeva: Acta Mater., 2015, vol. 94, pp. 78-8610.1016/j.actamat.2015.04.048 ↗
13. E. Oñorbe, G. Garcés, P. Pérez, S. Cabeza, M. Klaus, C. Genzel, E. Frutos and P.Adeva: Scr. Mater., 2011, vol. 65, pp. 719-722.10.1016/j.scriptamat.2011.07.017 ↗
14. E. Oñorbe, G. Garcés, P. Pérez and P. Adeva: J. Mater. Sci., 2012, vol. 47, pp. 1085-109310.1007/s10853-011-5899-4 ↗
15. M. Tane, Y. Nagai, H. Kimizuka, K. Hagihara and Y. Kawamura, Acta Mater., 2013, vol. 61, pp. 6338-6351.10.1016/j.actamat.2013.06.041 ↗
16. K. Hagihara, N. Yokotani and Y. Umakoshi: Intermetallics, 2010, vol. 18, pp. 267-276.10.1016/j.intermet.2009.07.014 ↗
17. G. Garces, M.A. Munoz-Morris, D.G. Morris, J.A. Jimenez, P. Perez and P. Adeva., Intermetallics, 2014, vol. 55, pp. 167-176.10.1016/j.intermet.2014.07.015 ↗
18. S. Kleiner and P.J. Uggowitzer: Mater. Sci. Eng. A, 2004, vol. 379, pp. 258–263.10.1016/j.msea.2004.02.020 ↗
19. G. Garces, P. Perez, S. Cabeza, H.K. Lin, S. Kim, W. Gan and P. Adeva: Mater. Sci. Eng. A, 2015, vol. 647, pp. 287-293.10.1016/j.msea.2015.09.003 ↗
20. C. Randau, H.G. Brokmeier, W.M. Gan, M. Hofmann, M. Voeller, W. Tekouo, N. Al-hamdany, G. Seidl and A. Schreyer: Nucl. Instr. Meth. Phys. Res. A, 2015, vol. 794, pp. 67-7510.1016/j.nima.2015.05.014 ↗
21. J.R. Santisteban, M.R. Daymond, L. Edwards and J.A. James: J. Applied Cryst., 2006, vol. 39, pp. 812-82510.1107/S0021889806042245 ↗
22. G. Garces, G. Requena, D. Tolnai, P. Perez, P. Adeva, A. Stark and N. Schell: J. Mater. Sci., 2014, vol. 49, pp. 2714–2722.10.1007/s10853-013-7967-4 ↗
23. G. Garcés, G. Requena, D. Tolnai, P. Pérez, P. Adeva, J.A. Jiménez, A. Stark and N. Schell: Rev. Metal., 2015, vol 51, e043. DOI:10.3989/revmetalm.043.10.3989/revmetalm.043 ↗
24. M.R. Barnett, Z. Keshavarz, A.G. Beer and D. Atwell: Acta Mater., 2004, vol. 52, pp. 5093-510310.1016/j.actamat.2004.07.015 ↗
25. S.R. Agnew, D.W. Brown and C.N. Tome: Acta Mater., 2006, vol. 54, pp. 4841-4852.10.1016/j.actamat.2006.06.020 ↗
26. E.A. Brandes and G.B. Brooks (eds.): Smithells Metals Reference Book, 15-2. Butterworth-Heinemann, London.
27. M.A. Gharghouri, G.C. Weatherly, J.D. Embury and J. Root: Phil. Mag. A, 1999, vol. 79, pp. 1671-1695.10.1080/01418619908210386 ↗
28. B. Clausen, C.N. Tomé, D.W. Brown and S.R. Agnew, Acta Mater., 2008, vol. 56, pp. 2456-2468.10.1016/j.actamat.2008.01.057 ↗
29. G. Garcés, P. Pérez and P. Adeva: Scr. Mater., 2005, vol. 52, pp. 615-619.10.1016/j.scriptamat.2004.11.024 ↗
30. E.A. Ball and P.B. Prangnell: Scr. Metal. Mater., 1994, vol. 31, pp. 111-116.10.1016/0956-716X(94)90159-7 ↗