Tailoring the Microstructure of a β-Solidifying TiAl Alloy by Controlled Post-solidification Isothermal Holding and Cooling
Source abstract
Abstract
In this study, the microstructure of a β-solidifying TiAl alloy was modified by means of temperature-controlled cooling. The microstructural evolution of the Ti-44.5Al-4Nb-2Cr-0.1B alloy in different cooling processes was investigated. The results showed firstly that both the solidification-segregation (S-segregation) and β-segregation were reduced considerably by raising the temperature or extending the time in the single β-phase region. Then samples were cooled through the β + α phase region at the cooling rates of 2, 50, and 650 K/min. The B2-phase and some large γ-phases exist in lamellar microstructure, which might be more evident at a higher cooling rate. Further, the Burgers relationships of {0001} α2//{110} β(B2) and {11 $$ \bar{2} $$ 0} α2//{111} β(B2) were identified in the fast cooling microstructure, and the non-Burgers equiaxed α-grains grew easily at a slow cooling rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. X. Wu: Intermetallics, 2006, vol. 14, pp 1114-22.10.1016/j.intermet.2005.10.019 ↗
2. R. Chen, H. Fang, X. Chen, Y. Su, H. Ding, J. Guo, H. Fu: Intermetallics, 2017, vol. 81, pp 9-15.10.1016/j.intermet.2017.02.025 ↗
3. J. Aguilar, A. Schievenbusch, O. Kättlitz: Intermetallics, 2011, vol. 19, pp 757-61.10.1016/j.intermet.2010.11.014 ↗
4. Z.C. Liu, J.P. Lin, S.J. Li, G.L. Chen: Intermetallics, 2002, vol. 10, pp 653-59.10.1016/S0966-9795(02)00037-7 ↗
5. Y. Chen, H. Niu, F. Kong, S. Xiao: Intermetallics, 2011, vol. 19, pp 1405-10.10.1016/j.intermet.2011.05.006 ↗
6. G. Liu, Z. Wang, T. Fu, Y. Li, H. Liu, T. Li, M. Gong, G. Wang: J. Alloy. Compd., 2015, vol. 650, pp 45-52.10.1016/j.jallcom.2015.07.259 ↗
7. E. Schwaighofer, H. Clemens, S. Mayer, J. Lindemann, J. Klose, W. Smarsly, V. Güther: Intermetallics, 2014, vol. 44, pp 128-40.10.1016/j.intermet.2013.09.010 ↗
8. G. Yang, H. Kou, J. Yang, J. Li, H. Fu: Acta Mater., 2016, vol. 112, pp 121-31.10.1016/j.actamat.2016.04.021 ↗
9. R.R. Zope, Y. Mishin: Phys. Rev. B, 2003, vol. 68, 024102.10.1103/PhysRevB.68.024102 ↗
10. D. Daloz, U. Hecht, J. Zollinger, H. Combeau, A. Hazotte, M. Založnik: Intermetallics, 2011, vol. 19, pp 749-56.10.1016/j.intermet.2010.11.013 ↗
11. P. Han, H.C. Kou, J.R. Yang, G. Yang, J.S. Li: Rare Metals, 2016, vol. 35, pp 35-41.10.1007/s12598-015-0633-z ↗
12. S.W. Kim, J.K. Hong, Y.S. Na, J.T. Yeom, S.E. Kim: Mater. Design, 2014, vol. 54, pp 814-19.10.1016/j.matdes.2013.08.083 ↗
13. W. Wallgram, T. Schmölzer, L. Cha, G. Das, V. Güther, H. Clemens: Int. J. Mater. Res., 2009, vol. 100, pp 1021-30.10.3139/146.110154 ↗
14. D. Hu, A.J. Huang, X. Wu: Intermetallics, 2007, vol. 15, pp 327-32.10.1016/j.intermet.2006.07.007 ↗
15. P.A. McQuay, D.M. Dimiduk, S.L. Semiatin: Scripta metall. Mater., 1991, vol. 25, pp 1689-94.10.1016/0956-716X(91)90476-H ↗
16. R.M. Imayev, V.M. Imayev, M. Oehring, F. Appel: Intermetallics, 2007, vol. 15, pp 451-60.10.1016/j.intermet.2006.05.003 ↗
17. T.T. Cheng, M.H. Loretto: Acta Mater., 1998, vol. 46, pp 4801-19.10.1016/S1359-6454(98)00113-X ↗
18. G.L. Chen, X.J. Xu, Z.K. Teng, Y.L. Wang, J.P. Lin: Intermetallics, 2007, vol. 15, pp 625-31.10.1016/j.intermet.2006.10.003 ↗
19. J. San Juan, P. Simas, T. Schmoelzer, H. Clemens, S. Mayer, M.L. Nó: Acta Mater., 2014, vol. 65, pp 338-50.10.1016/j.actamat.2013.10.075 ↗
20. R. Chen, S. Dong,, J. Guo, H. Ding, Y. Su, H. Fu: J. Alloy. Compd., 2015, vol 648, pp 667-675.10.1016/j.jallcom.2015.06.279 ↗
21. X.F. Ding, J.P. Lin, L.Q. Zhang, G.L. Chen: T. Nonferr. Metal. Soc., 2011, vol. 21, pp 26-31.10.1016/S1003-6326(11)60673-0 ↗
22. S. Divinski, F. Hisker, C. Klinkenberg, C. Herzig: Intermetallics, 2006, vol. 14, pp 792-99.10.1016/j.intermet.2005.12.007 ↗
23. Y. Mishin, C. Herzig: Acta Mater., 2000, vol. 48, pp 589-623.10.1016/S1359-6454(99)00400-0 ↗
24. Y.W. Cui, G. Xu, R. Kato, X.G. Lu, R. Kainuma, K. Ishida: Metall. Mater. Trans. A, 2013, Vol. 44, pp 1621–1625.10.1007/s11661-012-1586-6 ↗
25. G. Yang and J. Yang: Northwestern Polytechnical University, Xi’an, China, private communication, 2017.
26. E. Schwaighofer, B. Rashkova, H. Clemens, A. Stark, S. Mayer: Intermetallics, 2014, vol. 46, pp 173-184.10.1016/j.intermet.2013.11.011 ↗
27. F.W. Chen, G. Xu, X.Y. Zhang, K.C. Zhou, Y. Cui: J. Alloy. Compd., 2017, vol. 70, pp 352-365.10.1016/j.jallcom.2017.01.209 ↗
28. L. Song, X.J. Xu, L. You, Y.F. Liang, J.P. Lin: J. Alloy. Compd., 2014, vol. 616, pp 483-91.10.1016/j.jallcom.2014.07.130 ↗
29. X.Y. Wang,J.R. Yang, L. Song, H.C. Kou, J.S. Li,H.Z. Fu: Intermetallics, 2017, vol. 82, pp 32-39.10.1016/j.intermet.2016.11.007 ↗
30. M. Oehring, A. Stark, J.D.H. Paul, T. Lippmann, F. Pyczak: Intermetallics, 2013, vol. 32, pp 12-20.10.1016/j.intermet.2012.08.010 ↗
31. D. Hu, H. Jiang: Intermetallics, 2015, vol. 56, pp 87-95.10.1016/j.intermet.2014.09.007 ↗
32. U. Hecht, V. Witusiewicz, A. Drevermann, J. Zollinger: Intermetallics, 2008, vol. 16, pp 969-78.10.1016/j.intermet.2008.04.019 ↗
33. D. Hu, C. Yang, A. Huang, M. Dixon, U. Hecht: Intermetallics, 2012, vol. 23, pp 49-56.10.1016/j.intermet.2011.12.022 ↗
34. G. Yang, H.C. Kou, J.R. Yang: J. Alloy. Compd., 2016, vol. 66, pp 594-600.10.1016/j.jallcom.2015.12.110 ↗