journal article·2016-08

Influence of Composition and Hot Rolling on the Subsurface Microstructure and Bendability of Ultrahigh-Strength Strip

Antti Juhani Kaijalainen, Mia Liimatainen, Vili Kesti, Jouko Heikkala, Tommi Liimatainen, David A. Porter

Publisher page

Abstract

The effect of subsurface microstructure on the bendability of three 8-mm-thick low-alloyed hot-rolled and direct-quenched ultrahigh-strength strip steels with yield strengths in the range 800 to 1100 MPa has been investigated. Rolling to lower finish rolling temperatures increased austenite pancaking, leading to the formation of ferritic/granular bainitic subsurface microstructures that are softer than the upper bainitic microstructures found with higher finish rolling temperature. In addition, increased austenite pancaking was found to increase the intensities of ~{112}〈111〉α and ~{110}〈112〉α to {110}〈111〉α texture components in the surface layers, especially in upper bainitic microstructures. It is shown that the bendability of ultrahigh-strength steels is governed by subsurface hardness and crystallographic texture. Bendability was found to be related to mean microhardness 0.1 to 0.4 mm below the surface, such that excellent bendability was achieved with a relatively soft subsurface layer down to a depth of 0.4 mm, i.e., 5 pct of the sheet thickness. Intense ~{112}〈111〉α texture combined with upper bainite containing MA islands in the subsurface region is shown to be detrimental to bendability when the bend axis is perpendicular to the rolling direction probably as a result of geometrical softening combined with high hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. H. Asahi, E. Tsuru, T. Hara, M. Sugiyama, Y. Terada, H. Shinada, S. Ohkita, H. Morimoto, N. Doi, M. Murata, H. Miyazaki, E. Yamashita, T. Yoshida, N. Ayukawa, H. Akasaki, M. L. Macia, C. W. Petersen, J. Y. Koo, N. V. Bangaru, and M. J. Luton: Int. J. Offshore Polar Eng., 2004, vol. 14, pp. 36–41.
2. M. Hemmilä, R. Laitinen, T. Liimatainen, and D.A. Porter: in Proc. 1st Int. Conf. “Super-High Strength Steels” (Associazone Italiana di Metallurgica – AIM, Rome, 2005).
3. A. J. Kaijalainen, P. P. Suikkanen, T. J. Limnell, L. P. Karjalainen, J. I. Kömi, and D. A. Porter: J. Alloys Compd., 2013, vol. 577, pp. S642–48.10.1016/j.jallcom.2012.03.030 ↗
4. A. J. Kaijalainen, P. Suikkanen, L. P. Karjalainen, J. J. Jonas: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1273–83.10.1007/s11661-013-2062-7 ↗
5. J. Heikkala and A. Väisänen: in Proc. 11th Bienn. Conf. Eng. Syst. Des. Anal. (2012), pp. 1–13.
6. D. Rèche, T. Sturel, O. Bouaziz, A. Col, and A. F. Gourgues-Lorenzon: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5241–50.10.1016/j.msea.2011.03.042 ↗
7. C. Soyarslan, M. Malekipour Gharbi, and A. E. Tekkaya: Int. J. Solids Struct., 2012, vol. 49, pp. 1608–26.10.1016/j.ijsolstr.2012.03.009 ↗
8. M. Kaupper and M. Merklein: CIRP Ann. - Manuf. Technol., 2013, vol. 62, pp. 247–50.10.1016/j.cirp.2013.03.049 ↗
9. M. Liimatainen: The Effect of Microstructure on Bendability of Ultra-High Strength Steels, Tampere University of Technology, 2015.
10. A. J. Kaijalainen, P. P. Suikkanen, L. P. Karjalainen, and D. A. Porter: Mater. Sci. Eng. A, 2016, vol. 654, pp. 151–60.10.1016/j.msea.2015.12.030 ↗
11. V. Kesti, A. Kaijalainen, J. Mourujärvi, and R. Ruoppa: in 13th Nord. Steel Constr. Conf. (2015).
12. J. Hannula, D. A. Porter, M. C. Somani, A. Kaijalainen, P. Suikkanen, Y. R. Yang, and S. Tsai: in Int. Symp. Wear Resist. Alloy. Min. Process. Ind. (ASM, Sao Paulo, 2015), p. to be published.
13. R. Barbosa, F. Boratto, S. Yue, and J. J. Jonas: in Processing Microstructure and Properties of HSLA Steels, edited by A. J. Deardo, TMS, Warrendale, 1988, pp. 51–61.
14. F. C. Campbell: Elements of Metallurgy and Engineering Alloys, ASM International, Materials Park, Ohio, 2008.10.31399/asm.tb.emea.9781627082518 ↗
15. W. Steven and A. G. Haynes: J. Iron Steel Inst., 1956, vol. 183, pp. 349–59.
16. W. Stuhlmann: Härterei Tech. Mitteilungen, 1954, vol. 6, pp. 31–48.
17. A. Brownrigg, P. Curcio, and R. Boelen: Metallography, 1975, vol. 8, pp. 529–33.10.1016/0026-0800(75)90028-2 ↗
18. R. L. Higginson and C. M. Sellars: Worked Examples in Quantitative Metallography, Maney, London, 2003.
19. G. Krauss: Steels—Processing, Structure, and Performance, 2nd ed., ASM International, Materials Park, 2015.10.31399/asm.tb.spsp2.9781627082655 ↗
20. B. Bacroix: Effect of Molybdenum on Dynamic Precipitation and Recrystallization in Niobium and Vanadium Bearing Steels, McGill University, 1982.
21. I. Kozasu: in Int. Conf. Thermomechanical Process. Steels Other Mater., T. Chandra and T. Sakai, eds., The Minerals, Metals & Materials Society, Wollongong, 1997, pp. 47–55.
22. F.B. Pickering: in Microalloying’75, edited by M. Korchysky (Union Carbide Corporation, Washinghton DC, 1977), pp. 9–31.
23. G.D. Wang, Z.D. Wang, J.B. Qu, Z.Y. Jiang, and X.H. Liu: in Int. Conf. Thermomechanical Process. Steels Other Mater., T. Chandra and T. Sakai, eds., The Minerals, Metals & Materials Society, Wollongong, 1997, pp. 717–23.
24. K.A. Taylor and S.S. Hansen: in Heat Treat. Surf. Eng. New Technol. Pract. Appl., Chicago, 1988, pp. 137–42.
25. M.C. Somani, D.A. Porter, J.M. Pyykkönen, J.M. Tarkka, J.I. Kömi, T. A. Intonen, and L.P. Karjalainen: in Int. Conf. Microalloyed Steels Process. Microstruct. Prop. Perform., Association for Iron & Steel Technology, Pittsburgh, 2007, pp. 95–106.
26. J. Pyykkönen, P. Suikkanen, M. C. Somani, and D. A. Porter: Matériaux Tech., 2012, vol. 100, pp. S17–19.
27. H.K. D.H. Bhadeshia, Bainite in Steels: Transformations, Microstructure and Properties, 2nd ed., Institute of Materials, London, 2001.
28. N. J. Wittridge and J. J. Jonas: Acta Mater., 2000, vol. 48, pp. 2737–49.10.1016/S1359-6454(99)00460-7 ↗
29. C. G. Kang, H. G. Kang, H. C. Kim, M. Y. Huh, and H. G. Suk: J. Mater. Process. Technol., 2007, vol. 187–188, pp. 542–45.10.1016/j.jmatprotec.2006.11.096 ↗
30. M. Oka and T. Takechi: in Formability Metall. Struct., A. Sachdev and J. D. Embury, eds., Metallurgical Society, Warrendale, 1986, pp. 83–99.
31. K. Yamazaki, M. Oka, H. Yasuda, Y. Mizuyama, and H. Tsuchiya, Nippon Steel Tech. Rep., 1995, vol. 64, pp. 37–44.
32. E. Schmid and W. Boas: Kristallplastizität: Mit Besonderer Berücksichtigung Der Metalle (in German), Springer, Berlin, 1935.10.1007/978-3-662-34532-0 ↗
33. W. F. Hosford: Mechanical Behavior of Materials, Cambridge University Press, New York, 2005.10.1017/CBO9780511810930 ↗
34. R. J. Asaro: Acta Metall., 1979, vol. 27, pp. 445–53.10.1016/0001-6160(79)90036-1 ↗
35. C. N. Reid: Deformation Geometry for Materials Scientists, Pergamon Press, Oxford, 1973.
36. I. L. Dillamore, J. G. Roberts, and A. C. Bush: Met. Sci., 1979, vol. 13, pp. 73–77.10.1179/msc.1979.13.2.73 ↗
37. S. Zajac, V. Schwinn, and K. H. Tacke: Mater. Sci. Forum, 2005, vol. 500–501, pp. 387–94.10.4028/www.scientific.net/MSF.500-501.387 ↗
38. T. Furuhara, H. Kawata, S. Morito, G. Miyamoto, and T. Maki: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2008, vol. 39 A, pp. 1003–13.10.1007/s11661-008-9510-9 ↗
39. R. K. Ray and J. J. Jonas: Int. Mater. Rev., 1900, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗