Effect of Process Variables on the Inertia Friction Welding of Superalloys LSHR and Mar-M247
Source abstract
Abstract
The effect of inertia friction welding process parameters on microstructure evolution, weld plane quality, and the tensile behavior of welds between dissimilar nickel-base superalloys was established. For this purpose, the fine-grain, powder metallurgy alloy LSHR was joined to coarse-grain cast Mar-M247 using a fixed level of initial kinetic energy, but different combinations of the flywheel moment of inertia and initial rotation speed. It was found that welds made with the largest moment of inertia resulted in a sound bond with the best microstructure and room-temperature tensile strength equal to or greater than that of the parent materials. A relationship between the moment of inertia and weld process efficiency was established. The post-weld tensile behavior was interpreted in the context of observed microstructure gradients and weld-line defects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. M. Preuss, A. Steuwer, P. J. Withers, G. J. Baxter and S. Bray, In Trends in Welding Research: Proceedings of the 6th International Conference, April 15, 2002—April 19, 2002, (ASM International: Phoenix, AZ, United states, 2002), pp 886–90.
2. Z. W. Huang, H. Y. Li, M. Preuss, M. Karadge, P. Bowen, S. Bray and G. Baxter: Metall. Mater. Trans. A 2007, vol. 38 A, pp. 1608–20.10.1007/s11661-007-9194-6 ↗
3. H. S. Jeong, J. R. Cho and H. C. Park: Key Eng. Mater. 2007, vol. 345–346, pp. 1429-32.10.4028/www.scientific.net/KEM.345-346.1429 ↗
4. O.N. Senkov, D.W. Mahaffey, S. L. Semiatin and C. Woodward: Metall. Mater. Trans. A 2014, vol. 45A, pp. 5545–61.10.1007/s11661-014-2512-x ↗
5. M. Maalekian: Sci. Technol. Weld. Join. 2007, vol. 12, pp. 738–59.10.1179/174329307X249333 ↗
6. M.M. Attallah and M. Preuss, In Welding and Joining of Aerospace Materials, M.C. Chaturvedi, ed., Woodhead Publishing, Oxford, 2012).
7. O. N. Senkov, D. W. Mahaffey, S. L. Semiatin and C. Woodward: J. Mater. Eng. Perform. 2015, vol. 24, pp. 1173–84.10.1007/s11665-014-1379-8 ↗
8. M. Preuss, P. J. Withers and G. J. Baxter: Mater. Sci. Eng. A 2006, vol. 437, pp. 38–45.10.1016/j.msea.2006.04.058 ↗
9. M. Preuss, J.Q. Da Fonseca, I. Kyriakoglou, P. J. Withers and G. J. Baxter, In Superalloys 2004, TMS, Warrendale, 2004, pp 477–84.10.7449/2004/Superalloys_2004_477_484 ↗
10. A. Chamanfar, M. Jahazi and J. Cormier: Metall. Mater. Trans. A 2015, vol. 46A, pp. 1639–69.10.1007/s11661-015-2752-4 ↗
11. M.B. Mohammed, T. H. Hyde, C. J. Bennett and E.J. Williams, In ASME Turbo Expo 2009: Power for Land, Sea and Air, ASME, Orlando, 2009, pp 829–37.
12. O.T. Midling and O. Grong: Acta Metall. Mater. 1994, vol. 42, pp. 1595–1609.10.1016/0956-7151(94)90369-7 ↗
13. D.F. Wilcock and E.R. Booser: Bearing Design and Application, McGraw-Hill, New York, 1957.
14. F. Kreith and D.Y. Goswami: The CRC Handbook of Mechanical Engineering, 2nd ed., CRC Press, Boca Raton, 2005.
15. B.S. Herbage, In Sixth Turbomachinery Symposium, M. P Boyce ed., Texas A&M University Press, College Station, 1977, pp 33–38.
16. F.F. Wang, W.Y. Li, J.L. Li and A. Vairis: Int. J. Adv. Manuf. Technol 2014, vol. 71, pp. 1909–18.10.1007/s00170-013-5569-6 ↗
17. L. W. Zhang, J. B. Pei, Q. Z. Zhang, C. D. Liu, W. H. Zhu, S. Qu and J. H. Wang: Acta Metall. Sinica (English Letters) 2007, vol. 20, pp. 301–06.10.1016/S1006-7191(07)60043-X ↗
18. I. Wang, M. Preuss, P.J. Withers, G. Baxter and P. Wilson: Metall. Mater. Trans. B 2005, vol. 36B, pp. 513–23.10.1007/s11663-005-0043-y ↗
19. L. B. Yang, J. C. Gebelin and R. C. Reed: Mater. Sci. Technol. 2011, vol. 27, pp. 1249–64.10.1179/1743284710Y.0000000022 ↗
20. J.S. Tiley, D.W. Mahaffey, O.N. Senkov, T. Alam, P. Rojhirunsakool, T. Parthasarthy and R. Banerjee: Mater. Sci. Eng. A 2016, vol. 662, pp. 26–35.10.1016/j.msea.2016.03.030 ↗