journal article·2014-12

Mechanism of Secondary Hardening in Rapid Tempering of Dual-Phase Steel

Dulal Chandra Saha, Sashank S. Nayak, Elliot Biro, Adrian P. Gerlich, Y. Zhou

Publisher page

Abstract

Dual-phase steel with ferrite-martensite-bainite microstructure exhibited secondary hardening in the subcritical heat affected zone during fiber laser welding. Rapid isothermal tempering conducted in a Gleeble simulator also indicated occurrence of secondary hardening at 773 K (500 °C), as confirmed by plotting the tempered hardness against the Holloman–Jaffe parameter. Isothermally tempered specimens were characterized by analytic transmission electron microscopy and high-angle annular dark-field imaging. The cementite (Fe3C) and TiC located in the bainite phase of DP steel decomposed upon rapid tempering to form needle-shaped Mo2C (aspect ratio ranging from 10 to 25) and plate-shaped M4C3 carbides giving rise to secondary hardening. Precipitation of these thermodynamically stable and coherent carbides promoted the hardening phenomenon. However, complex carbides were only seen in the tempered bainite and were not detected in the tempered martensite. The martensite phase decomposed into ferrite and spherical Fe3C, and interlath-retained austenite decomposed into ferrite and elongated carbide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. R. Nadlene, H. Esah, S. Norliana, and M. A. Mohd Irwan: World Acad. Sci. Eng. Technol., 2011, vol. 50, pp. 564–67.
2. C. Yao, B. Xu, J. Huang, P. Zhang, Y. Wu: Opt. Laser Eng., 2010, vol. 48, pp. 20–26.10.1016/j.optlaseng.2009.05.001 ↗
3. S.S. Nayak, V.H. Baltazar Hernandez, Y. Zhou: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3242–48.10.1007/s11661-011-0868-8 ↗
4. V.H. Baltazar Hernandez, S.S. Nayak, Y. Zhou: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3115–29.10.1007/s11661-011-0739-3 ↗
5. E. Biro and A. Lee: Sheet Metal Welding Conference XI, Sterling Heights, MI, 2004.
6. T. Burns: Master Thesis, University of Waterloo, 2009.
7. M. Xia, E. Biro, Z. Tian, and Y. Zhou: ISIJ Int., 2008, vol. 48, pp. 809–14.10.2355/isijinternational.48.809 ↗
8. P. Ghosh: ISIJ Int., 1990, vol. 30, pp. 317–24.10.2355/isijinternational.30.317 ↗
9. V.H. Baltazar Hernandez, S.K. Panda, Y. Okita, and Y. Zhou: J. Mater. Sci., 2010, vol. 45, pp. 1638–47.10.1007/s10853-009-4141-0 ↗
10. H. Tanabe, A. Miyasaka, I. Anai, and S. Tanioka: Nippon Steel Tech. Rep., 1995, pp. 62–68.
11. M. Jung, S.-J. Lee, and Y.-K. Lee: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 551–59.10.1007/s11661-008-9756-2 ↗
12. G.B. Olson and W.S. Owen: Martensite, Asm International, Metals Park, OH, 1992, p. 261.
13. R. C. Thomson and M. K. Miller: Acta Mater., 1998, vol. 46, pp. 2203–13.10.1016/S1359-6454(97)00420-5 ↗
14. D. Huang, S.S. Nayak, M.A. Wells, Y. Zhou, E. Biro, Sheet Metal Welding Conference XV Proceedings, Livonia, MI, 2012, pp. 1–11.
15. A.D.B. Gingell, H.K.D.H. Bhadeshia, D.G. Jones, K.J.A. Mawella: J. Mater. Sci., 1997, vol. 32, pp. 4815–20.10.1023/A:1018695317549 ↗
16. H.K.D.H. Bhadeshia: Bainite in Steels: Transformations, Microstructure and Properties, IOM Communications Ltd, London, 2001.
17. D. Delagnes, P. Lamesle, M.H. Mathon, N. Mebarki, and C. Levaillant: Mater. Sci. Eng. A, 2005, vol. 394, pp. 435–44.10.1016/j.msea.2004.11.050 ↗
18. C.H. Yoo, H.M. Lee, J.W. Chan, J.W. Morris Jr.: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3466–72.10.1007/BF02595438 ↗
19. D. Rosenthal: Weld. J., 1941, vol. 20, p. 220s.
20. A.K. Jena, M.C. Chaturvedi: Mater. Sci. Eng., 1988, vol. 100, pp. 1–6.10.1016/0025-5416(88)90232-7 ↗
21. N. Saeidi, A. Ekrami: Mater. Sci. Eng. A, 2009, vol. 523, pp. 125–39.10.1016/j.msea.2009.06.057 ↗
22. F. Danoix, R. Danoix, J. Akre, A. Grellier, D. Delagnes: J. Microscopy, 2011, vol. 244, pp. 305–10.10.1111/j.1365-2818.2011.03537.x ↗
23. J. H. Hollomon and L. D. Jaffe: Trans. TMS-AIME, 1945, vol. 162, pp. 223–49.
24. D. Kuhlmann-Wilsdorf: Metall. Trans. A, 1985, vol. 16A, pp. 2091–108.10.1007/BF02670414 ↗
25. W. Saikaly, X. Bano, C. Issartel, G. Rigaut, L. Charrin, A. Charai: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1939–47.10.1007/s11661-001-0006-0 ↗
26. J.H. Jang, C.-H. Lee, H.N. Han, H.K.D.H. Bhadeshia, and D.-W. Suh: Mater. Sci. Technol., 2013, pp. 1–6.
27. K. Nishioka, K. Ichikawa: Sci. Technol. Adv. Mater., 2012, vol. 13, pp. 1–20.
28. G.K. Tirumalasetty, C.M. Fang, Q. Xu, J. Jansen, J. Sietsma, M.A. Huis, H.W. Zandbergen: Acta Mater., 2012, vol. 60, pp. 7160–68.10.1016/j.actamat.2012.09.025 ↗
29. K. Aigner, W. Lengauer, D. Rafaja, P. Ettmayer: J. Alloy. Compd., 1994, vol. 215, pp. 121–26.10.1016/0925-8388(94)90828-1 ↗
30. W. Kim, J. Park, C. Suh, S. Cho, S. Lee, I.-J. Shon: Mater. Trans., 2009, vol. 50, pp. 2897–99.10.2320/matertrans.M2009297 ↗
31. H.A. Wriedt, J.L. Murray: Bull. Alloy Phase Diagr., 1987, vol. 8, pp. 378–88.10.1007/BF02869274 ↗
32. Y. Kang, Q. Han, X. Zhao, M. Cai: Mater. Des., 2013, vol. 44, pp. 331–39.10.1016/j.matdes.2012.07.068 ↗
33. J.M. Schissler, J. Arnould, G. Metauer: Mem. Sci. Rev. Metall., 1975, vol. 6, pp. 779–93.
34. J.H. Jang, I.G. Kim, H.K.D.H. Bhadeshia: Comput. Mater. Sci., 2009, vol. 44, pp. 1319–26.10.1016/j.commatsci.2008.08.022 ↗
35. T. Furuhara, K. Kobayashi, T. Maki: ISIJ Int., 2004, vol. 44, pp. 1937–44.10.2355/isijinternational.44.1937 ↗
36. S. Yamasaki, H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2003, vol. 19, pp. 723–31.10.1179/026708303225002929 ↗
37. D. Delagnes, F. Pettinari-Sturmel, M.H. Mathon, R. Danoix, F. Danoix, C. Bellot, P. Lamesle, A. Grellier: Acta Mater., 2012, vol. 60, pp. 5877–88.10.1016/j.actamat.2012.07.030 ↗
38. T.P. Hou, Y. Li, Y.D. Zhang, and K.M. Zu: Metall. Trans. A, 2014, vol. 45A, pp. 2553–61.10.1007/s11661-014-2188-2 ↗
39. A.-M.E. Rakayby, B. Mills: Mater. Sci. Technol., 1986, vol. 2, pp. 175–80.10.1179/mst.1986.2.2.175 ↗
40. Z. Hu, X. Wu, C. Wang: Mater. Sci. Technol., 2004, vol. 20, pp. 425–28.
41. M.S. Bhat, J. Garrison, W.M., V.F. Zackay: Mater. Sci. Eng., 1979, vol. 41, pp. 1–15.10.1016/0025-5416(79)90038-7 ↗
42. W.B. Pearson: A Handbook of Lattice Spacings and Structures of Metals and Alloys, Pergamon Press, Oxford, 1958, pp. 895–1037.10.1016/B978-1-4832-1318-7.50016-4 ↗
43. J. Koo and M. J. Luton: United Nations Patent, 5545269, 1996.
44. C.H. Yoo, H.M. Lee, J.W. Chan, J. Morris, John W.: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3466–72.10.1007/BF02595438 ↗
45. K. Cho, J. Choi, H. Kang, S. Kim, K. Lee, H. Yang, H. Kwon: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7286–93.10.1016/j.msea.2010.07.069 ↗