The effect of mischmetal addition on the structure and mechanical properties of a cast Al-7Si-0.3Mg alloy containing excess iron (up to 0.6 Pct)
Source abstract
Abstract
The effect of Fe content (0.2 to 0.6 pct) on the microstructure and mechanical properties of a cast Al-7Si-0.3Mg (LM 25/356) alloy has been investigated. Further, 1 pct mischmetal (MM) additions (a mixture of rare-earth (RE) elements) were made to these alloys, and their mechanical properties at room and at elevated temperatures (up to 200 °C) were evaluated. A structure-property correlation on this alloy was attempted using optical microstructure analysis, fractographs, X-ray diffraction, energy-dispersive analysis of X-rays (EDX), and quantitative metallography by image analysis. An increase in Fe content increased the volume percentage of Fe-bearing intermetallic compounds (β and π phases), contributing to the loweryield strength (YS), ultimate tensile strength (UTS), percentage elongation, and higher hardness. An addition of 1 pct MM to the alloys containing 0.2 and 0.6 pct Fe was found to refine the microstructure; modify the eutectic silicon and La, Ce, and Nd present in the MM; form different intermetallic compounds with Al, Si, Fe, and Mg; and improve the mechanical properties of the alloys both at room and elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Metals Hand book, 9th ed., ASM, Metals Park, OH, 1979, vol. 2, p. 164.
2. M. Ravi, U.T.S. Pillai, B.C. Pai, A.D. Damodaran, and E.S. Dwarakadasa: Int. J. Cast Met. Res., 1998, vol. 11, pp. 113–25.10.1080/13640461.1998.11819265 ↗
3. B. Closset and J.E. Gruzleski: Metall. Trans. A, 1982, vol. 13A, pp. 945–51.10.1007/BF02643389 ↗
4. G.K. Sigworth, S. Shivakumar, and D. Apelian: Trans. AFS, 1989, vol. 97, pp. 791–810.
5. W.A. Bailey: Foundry, 1964, May, pp. 54–60.10.11619/africa1964.1964.54 ↗
6. Z.W. Chen and W.R. Thorpe: Cast Met., 1995, vol. 8 (3), pp. 179–91.10.1080/09534962.1995.11819206 ↗
7. D.A. Granger, R.R. Sawtell, and M.M. Kersker: Trans. AFS, 1984, vol. 92, pp. 579–86.
8. M. Tsukda, T. Suzuki, and S. Koike: J. Jpn. Inst. Light Met., 1979, vol. 29, p. 131.10.2464/jilm.29.131 ↗
9. O. Vorren, J.E. Evensen, and T.B. Pedersen: Trans. AFS, 1984, vol. 92, pp. 459–66.
10. G. Gustafsson, T. Thorvaldsson, and G.L. Dunlop: Metall. Trans. A, 1986, vol. 17A, pp. 45–52.10.1007/BF02644441 ↗
11. V.G. Rivlin and G.V. Reynar: Inst. Met. Rev., 1981, vol. 26, p. 133.10.1179/imr.1981.26.1.133 ↗
12. L.F. Mondolfo: Aluminium Alloys: Structure and Properties, Butter-worth & Co (Publishers) Ltd., London, 1976, p. 760.
13. R.S. Archer and L.W. Kemp: AIME Trans., 1931, vol. 93, pp. 448–79.
14. A. Couture: AFS. Int. Cast. Met. J., 1981, Dec, pp. 9–17.10.1016/0047-2670(81)85190-8 ↗
15. G. Pragmen: J. Inst. Met., 1950, vol. 77, pp. 489.
16. S. Murali, K.S. Raman, and K.S.S. Murthy: Cast Met., 1994, vol. 6, pp. 189–98.10.1080/09534962.1994.11819149 ↗
17. C. Houska: Met. Mater., 1988, vol. 4, p. 100.
18. W.A. Beily: Trans. AFS, 1964, vol. 72, pp. 443–54.
19. Xiufang Bian, Guobua Zang, Shengxu Zhao, and Jiaji Ma: Cast Met., 1992, vol. 5, pp. 39–41.10.1080/09534962.1992.11819090 ↗
20. V.S. Zolotorevsky, A.A. Axenov, and N.A. Belov: Key Eng. Mater., 1990, vols. 44–45, pp. 347–64.10.4028/www.scientific.net/KEM.44-45.347 ↗
21. B.J. Ye, C.R. Loper, Jr., D.Y. Lu, and C.S. Kang: Trans. AFS, 1985, vol. 93, pp. 533–44.
22. R. Sharan and T.R. Anantharaman: Curr. Sci., 1967, vol. 5, pp. 568–570.
23. R. Sharan and P. Saksena: Castings, 1978, Jan.–Feb., pp. 37–41.
24. E.N. Pan, H.S. Chiou, and G.J. Liao: Trans. AFS, 1991, vol. 99, pp. 605–21.
25. M. Ravi, U.T.S. Pillai, B.C. Pai, A.D. Damodaran, and E.S. Dwarakadasa: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1283–92.10.1007/BF02649865 ↗
26. J.C. Jaquet and W. Hotz: Cast Met., 1992, vol. 4 (4), pp. 200–25.10.1080/09534962.1991.11819081 ↗
27. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill Book Company, New York, NY, 1986, p. 451.
28. Abdel-Hady Mohamed and Khalid Kher Ramadan: Metallkd., 1989, vol. 80, pp. 431–37.
29. W. Unsworth: Light Alloys, 1988, vol. H6, pp. 83–86.