Quantitative Assessment of Deformation-Induced Damage in a Semisolid Aluminum Alloy via X-ray Microtomography
Source abstract
Abstract
Semisolid tensile testing combined with X-ray microtomography (XMT) was used to characterize the development of internal damage as a function of strain in an aluminum-magnesium alloy, AA5182. Novel techniques were developed to allow the quantification of both the size evolution and orientation of the damage to determine mechanisms controlling the early stage growth and localization. During the initial stages of semisolid deformation, it was observed that strain was accommodated by both the growth of as-cast porosity and the detection of new damage-based voids. As the volume fraction of damage increases, the growth of voids occurs in an orientation perpendicular to the loading direction, both through expansion within the grain boundary liquid and void coalescence. The damage then localizes, causing failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. J. Campbell: Castings, 2nd ed., Butterworth Heinemann, London, UK, 2003
2. S. David, T. Debroy: Science, 1992, vol. 257, pp. 497–50610.1126/science.257.5069.497 ↗
3. W.S. Pellini: Foundry, 1952, pp. 125–37
4. U. Feurer: Giesserei-Forschung, 1976, pp. 75–80
5. D. Warrington, D.G. McCartney: Cast Met., 1991, vol. 3, pp. 202–0810.1080/09534962.1990.11819040 ↗
6. Y.F. Guven, J.D. Hunt: Cast Met., 1988, vol. 1, pp. 104–1110.1080/09534962.1988.11818955 ↗
7. H. Fredriksson, B. Lehtinen: Int. Conf. Solidification and Casting of Metals, Metals Society, Sheffield, United Kingdom, 1977, pp. 260–67
8. D. Davidson, D. Viano, L. Liming, D. St. John: Shape Casting: The John Campbell Symp., M. Tiryakioglu, P.N. Crepeau, eds., TMS, San Francisco, CA, 2005, pp. 175–82
9. I. Farup, J.M. Drezet, M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261–6910.1016/S1359-6454(01)00013-1 ↗
10. H. Fredriksson, M. Haddad-Sabzervar, K. Hansson, J. Kron: Mater. Sci. Technol., 2005, vol. 21, pp. 521–2910.1179/174328405X29276 ↗
11. T.S. Piwonka, M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 1157–65
12. J.P. Hirth, G.M. Pound, G.R. St. Pierre: Metall. Trans., 1970, vol. 1, pp. 939–4510.1007/BF02642816 ↗
13. L.J. Colley, M.A. Wells, D.M. Maijer: Mater. Sci. Eng. A, 2004, vol. 386 (1–2), pp. 140–4810.1016/S0921-5093(04)00928-1 ↗
14. W.M. van Haaften, W.H. Kool, L. Katgerman: Mater. Sci. Eng. A, 2002, vol. 336, pp. 1–610.1016/S0921-5093(01)01987-6 ↗
15. S. Thompson, S.L. Cockcroft, M.A. Wells: Mater. Sci. Technol., 2004, vol. 20 (4), pp. 497–50410.1179/026708304225012053 ↗
16. A.B. Phillion, S.L. Cockcroft, P.D. Lee: Scripta Mater., 2006, vol. 55, pp. 489–9210.1016/j.scriptamat.2006.03.035 ↗
17. H. Toda, T. Ohgaki, K. Uesugi, M. Kobayashi, N. Koroda, T. Kobayashi, M. Ninomi, T. Akahori, K. Makii, Y. Aruga: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1211–1910.1007/s11661-006-1072-0 ↗
18. E. Maire, J.Y. Buffiere, L. Salvo, J.J. Blandin, W. Ludwig, J.M. Letang: Adv. Eng. Mater., 2001, vol. 3, pp. 539–4610.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6 ↗
19. L. Salvo, P. Cloetens, E. Maire, S. Zabler, J.J. Blandin, J.Y. Buffiere, W. Ludwig, E. Boller, D. Bellet, C. Josserond: Nucl. Instrum. Meth. Phys. Res., Sect. B, 2003, vol. 200, pp. 273–8610.1016/S0168-583X(02)01689-0 ↗
20. J. Baruchel, J.-Y. Buffiere, P. Cloetens, M.D. Michiel, E. Ferrie, W. Ludwig, E. Maire, L. Salvo: Scripta Mater., 2006, vol. 55, pp. 41–4610.1016/j.scriptamat.2006.02.012 ↗
21. M.D. Abramoff, P.F. Magelhaes, and S.J. Ram: Biophotonics Int., 2004, vol. 11 (7), pp. 36–42
22. P. Perona, J. Malik: IEEE-PAMI, 1990, vol. 12, pp. 629–3910.1109/34.56205 ↗
23. E. Maire, J.C. Grenier, D. Daniel, A. Baldacci, H. Klocker, A. Bigot: Scripta Mater., 2006, vol. 55, pp. 123–2610.1016/j.scriptamat.2006.03.066 ↗
24. L. Arnberg, L. Backerud, G. Chai: Solidification Characteristics of Al Alloys-V3 Dendrite Coherency, American Foundry Society, Des Plaines, IL, 1996
25. P.D. Lee, J.D. Hunt: Acta Mater., 2001, vol. 49, pp. 1383–9810.1016/S1359-6454(01)00043-X ↗
26. P.D. Lee, R.C. Atwood, R.J. Dashwood, H. Nagaumi: Mater. Sci. Eng. A, 2002, vol. 328, pp. 213–2210.1016/S0921-5093(01)01687-2 ↗
27. P.D. Lee, J.D. Hunt: Acta Mater., 1997, vol. 45, pp. 4155–6910.1016/S1359-6454(97)00081-5 ↗
28. T.S. Yoo, M.J. Ackerman, W.E. Lorensen, W. Schroeder, V. Chalana, S. Aylward, D. Metaxes, and R. Whitaker: Proc. Medicine Meets Virtual Reality, J. Westwood, ed., Press Amsterdam, 2002, pp. 586–92
29. N.R. Green and J. Campbell: AFS Trans., 1994, pp. 341–47
30. J. Mi, R.A. Harding, J. Campbell: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2893–90210.1007/s11661-004-0237-y ↗
31. X. Cao, J. Campbell: Can. Met. Q., 2005, vol. 44, pp. 435–4710.1179/cmq.2005.44.4.435 ↗
32. J. Campbell: Mater. Sci. Technol., 2006, vol. 22, pp. 127–4510.1179/174328406X74248 ↗