journal article·2014-03

Mechanical Behavior of Carbide-free Medium Carbon Bainitic Steels

Xiaoxu Zhang, Guang Xu, Xiang Wang, David Embury, Olivier Bouaziz, Gary R. Purdy, Hatem S. Zurob

Publisher page

Abstract

The effect of bainitic transformation time on the microstructure and mechanical properties was investigated in a steel containing 0.4 pct C-2.8 pct Mn-1.8 pct Si. The microstructure was characterized using optical and transmission electron microscopy; it consisted of bainitic ferrite, martensite, and retained austenite. The volume fraction of bainite increased from 0.4 for the shortest bainitic transformation time (30 minutes) to 0.9 at the longest time (120 minutes). The above microstructures exhibited an extended elasto-plastic transition leading to very high initial work-hardening rates. The work-hardening behavior was investigated in detail using strain-path reversals to measure the back stresses. These measurements point to a substantial kinematic hardening due to the mechanical contrast between the microstructural constituents. The onset of necking coincided with the saturation of kinematic hardening. Examination of the fracture surfaces indicated that the prior austenite grain boundaries play an important role in the fracture process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. H.K.D.H. Bhadeshia and D.V. Edmonds: Met. Sci., 1983, vol. 17, pp. 420-25.10.1179/030634583790420646 ↗
2. F.G. Caballero, H.K.D.H. Bhadeshia, J.A. Mawella, D.G. Jones and P. Brown: Mater Sci Technol., 2001, vol. 17, pp. 512-16.10.1179/026708301101510348 ↗
3. F.G. Caballero, H.K.D.H. Bhadeshia, J.A. Mawella, D.G. Jones and P. Brown: Mater Sci Technol., 2001, vol. 17, pp. 517-22.10.1179/026708301101510357 ↗
4. F.G. Caballero and H. K. D. H. Bhadeshia: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 251-57.10.1016/j.cossms.2004.09.005 ↗
5. C. Garcıa-Mateo and F.G. Caballero: Mater. Trans., 2005, vol. 46, pp. 1839-46.10.2320/matertrans.46.1839 ↗
6. B.R. Somers: Introduction to the Selection of Carbon and Low-Alloy Steels, in ASM Handbook, 6th ed., ASM International, Metals Park, OH, 1993.10.31399/asm.hb.v06.a0001404 ↗
7. F.G. Caballero, M.J. Santofimia, C. Garcia-Mateo, J. Chao and C. Garcia de Andres: Mater. Des., 2009, vol. 30, pp. 2077-83.10.1016/j.matdes.2008.08.042 ↗
8. F.G. Caballero, C. Garcia-Mateo, C. Capdevila and C. Garcia de Andres: Mater. Manuf. Process., 2007, vol. 22, pp. 502-06.10.1080/10426910701236023 ↗
9. S. Allain and T. Iung: Rev. Metall., 2008, vol. 105, pp. 520-30.10.1051/metal:2008068 ↗
10. K.I. Sugimoto: Mater. Sci. Technol., 2009, vol. 25, pp. 1108-117.10.1179/174328409X453307 ↗
11. M. Soliman, H. Mostafa, A.S. El-Sabbagh and H. Palkowski: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7706-713.10.1016/j.msea.2010.08.037 ↗
12. S.K. Putatunda, A.V. Singar, R. Tackett and G. Lawes: Mater. Sci. Eng. A, 2009, 513–514, pp. 329–39.10.1016/j.msea.2009.02.013 ↗
13. B.A. Graville: in Welding of HSLA (Microalloyed) Structural Steels, Proceedings International Conference, American Society of Metals, Materials Park, 1976.
14. ASTM E975-03 (2008): ASTM Annual Book of Standards (2008), ASTM International, West Conshohocken, 2008.
15. J.S. Kirkaldy, J. von Destinon-Forstmann, and R.J. Brigham: Can. Metall. Q., 1962, vol. 59, pp. 59-81.10.1179/cmq.1962.1.1.59 ↗
16. R.E. Stoltz and R.M. Pelloux: Metall. Trans. A, 1976, vol. 7 (9), pp. 1295–1306.10.1007/BF02658814 ↗
17. S.S. Brenner: Growth and Perfection of Crystals, R.H. Doremus, B.W. Roberts, and D. Turnbull, , eds., Wiley, New York, 1958, pp. 157–90.
18. A. Kelly and H. MacMillan: Strong Solids, Clarendon Press, Oxford, 1986.
19. G. Masing: Proceedings of 2nd International Congress for Applied Mechanics, Zurich, Switzerland, 1926, pp. 332–35.
20. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76-85.10.1115/1.3443340 ↗
21. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29(11), pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
22. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, 1986, p. 283.
23. X. Wang, H.S. Zurob, G. Xu, Q. Ye, O. Bouaziz, and D. Embury: Metall. Mater. Trans. A, 2013, vol. 44 (3), pp. 1454–61.10.1007/s11661-012-1501-1 ↗
24. K.I. Sugimoto, T. Iida, J. Sakaguchi and T. Kashima: ISIJ Int., 2000, vol. 40, no. 9, pp. 902-08.10.2355/isijinternational.40.902 ↗
25. K.I. Sugimoto, K. Nakano, S.M. Song and T. Kashima: ISIJ Int., 2002, vol. 42, no. 4, pp. 450-55.10.2355/isijinternational.42.450 ↗
26. J. Hell, M.Dehmas, S. Allain, J. M. Prado, A. Hazotte and J. Chateau: ISIJ Int., 2011, vol. 51, no. 10, pp. 1724-32.10.2355/isijinternational.51.1724 ↗
27. C.T. Liu, C.L. White and J.A. Horton: Acta Metall., 1985, vol. 33, no. 2, pp. 213-29.10.1016/0001-6160(85)90139-7 ↗