Novel Surface Topography and Microhardness Characterization of Laser Clad Layer on TC4 Titanium Alloy Using Laser-Induced Breakdown Spectroscopy and Machine Learning
Source abstract
Abstract
Abstract This study was performed to characterize surface topography and microhardness of 40 wt pct NiCrBSiC-60 wt pct WC hard coating on TC4 titanium after coaxial laser claddingviaLaser Induced Breakdown Spectroscopy (LIBS) and machine learning. The high content of the hard WC particles is accomplished to enhance the abrasion wear resistance of such alloy. Various powder feeding rates were carried out during laser cladding process. The energy-dispersive X-ray analysis assured that W content in the metal matrix notably increased from 26.19 to 53.49 pct while the Ti content decreased from about 15.16 to 0.46 pct for the clad layer processed at 20 and 60 g min−1, respectively. The LIBS measurements successfully estimated such elements’ concentration as well as the clad layers' topography indicating that the effect of material matrix is a crucial challenge. Therefore, canonical correlation analysis and Belsley collinearity diagnostics were established to identify the essential emission lines from the whole spectra. Then, an optimized adaptive boosted random forest classifier was developed for microhardness investigation, with accuracy, sensitivity, and F1 score values of 0.9667. The results, confirmed by the metallurgical study, clarified that most of the titanium and tungsten emission lines have a significant impact on the surface topography as well as the microhardness values. The misclassification was attributed to the matrix effect such that the samples processed at 40 and 60 g min−1were comparable in microstructure and chemical characterization unlike the one processed at 20 g min−1. Vickers microhardness of the metal matrix coating increased with the increase in the powder feeding rate, which is assured by the quantitative classification model. Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser-induced spectroscopy and plasma · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. S.R. Al-Sayed-Ali, A.H.A. Hussein, A. Nofal, S.I. Hassab-Elnaby, and H. Elgazzar: Metall. Res. Technol., 2019, https://doi.org/10.1051/metal/2019060.10.1051/metal/2019060 ↗
2. S.R. Al-Sayed and A. Abdelfatah: Metallogr. Microstruct. Anal., 2020, vol. 9, pp. 553–60.10.1007/s13632-020-00667-w ↗
3. A.A. Hussein, S.R. Al-Sayed, S.I.H. Elnaby, A.A. Nofal, and H. Elgazzar: Key Eng. Mater., 2018, vol. 786, pp. 87–97.10.4028/www.scientific.net/KEM.786.87 ↗
4. J. Dai, J. Zhu, C. Chen, and F. Weng: J. Alloys Compd., 2016, vol. 685, pp. 784–98.10.1016/j.jallcom.2016.06.212 ↗
5. M.V.D.S. Kalyan, H. Kumar, and L. Nagdeve: IOP Conf Mater. Sci. Eng Ser, 2021, https://doi.org/10.1088/1757-899X/1104/1/012020.10.1088/1757-899X/1104/1/012020 ↗
6. S.R. Al-Sayed, A.M. Elshazli, and A.H.A. Hussein: Metals (Basel), 2020, vol. 10, pp. 1–9.10.3390/met10060795 ↗
7. S. Singh, D. Kumar, P. Kumar, and A. Bansal: Int. J. Refract. Met. Hard Mater., 2022, vol. 105, p. 105825.10.1016/j.ijrmhm.2022.105825 ↗
8. W.Y.S. Lim, J. Cao, A. Suwardi, T.L. Meng, C.K.I. Tan, and H. Liu: J. Adhes. Sci. Technol., 2022, https://doi.org/10.1080/01694243.2022.2085499.10.1080/01694243.2022.2085499 ↗
9. L. Zhu, P. Xue, Q. Lan, G. Meng, Y. Ren, Z. Yang, P. Xu, and Z. Liu: Opt. Laser Technol., 2021, vol. 138, p. 106915.10.1016/j.optlastec.2021.106915 ↗
10. L. Yang, X. Yang, T. Zhang, and R. Sun: Ceram. Int., 2021, vol. 47, pp. 2230–43.10.1016/j.ceramint.2020.09.063 ↗
11. S. R. Al-Sayed and D. Youssef: in Laser Congress 2021 (ASSL,LAC), Optica Publishing Group, 2021, Washington, DC United States, 2021, p. paper JM3A.60.10.1364/ASSL.2021.JM3A.60 ↗
12. S. Lu, J. Zhou, L. Wang, and J. Liang: Surf. Coat. Technol., 2021, vol. 405, p. 126734.10.1016/j.surfcoat.2020.126734 ↗
13. T. Lindner, A. Günen, G. Töberling, S. Vogt, M.S. Karakas, M. Löbel, and T. Lampke: Appl. Sci., 2021, https://doi.org/10.3390/app112411935.10.3390/app112411935 ↗
14. S.R. Al-Sayed, H. Elgazzar, and A. Nofal: Met. Mater. Int., 2022, https://doi.org/10.1007/s12540-021-01160-x.10.1007/s12540-021-01160-x ↗
15. D. Youssef and S.R. Al-Sayed: in NILES 2021—3rd Novel Intelligent and Leading Emerging Sciences Conference, Proceedings, Institute of Electrical and Electronics Engineers Inc., 2021, pp. 413–15.
16. J. Dutta, S. Katharina, K. Wissenbach, S. Katharina, C. Blawert, and A. Weisheit: Procedia Manuf., 2019, vol. 35, pp. 840–46.10.1016/j.promfg.2019.06.030 ↗
17. U.O. Okoli, I.O. Otunniyi, and I.D. Adebiyi: Mater. Today Proc., 2021, vol. 38, pp. 988–93.10.1016/j.matpr.2020.05.560 ↗
18. F. Weng, H. Yu, C. Chen, J. Liu, and L. Zhao: J. Alloys Compd., 2016, vol. 686, pp. 74–81.10.1016/j.jallcom.2016.05.319 ↗
19. D. Dey, K. Simant, I. Khan, I. Bangia, A. Kumar, and A. Roy: Opt. Laser Technol., 2022, vol. 150, p. 107982.10.1016/j.optlastec.2022.107982 ↗
20. X. Zhang, S. Pfei, P. Rutkowski, M. Makowska, D. Kata, J. Yang, and T. Graule: Appl. Surf. Sci., 2020, https://doi.org/10.1016/j.apsusc.2020.146304.10.1016/j.apsusc.2020.146304 ↗
21. A. Günen and A. Çürük: JOM, 2020, vol. 72, pp. 673–83.10.1007/s11837-019-03950-6 ↗
22. A. Günen: Acta Phys. Pol. A, 2016, vol. 130, pp. 217–22.10.12693/APhysPolA.130.217 ↗
23. S. Al-Sayed Ali, A. Hussein, A. Nofal, S. Hasseb Elnaby, H. Elgazzar, and H. Sabour: Materials (Basel), 2017, vol. 10, p. 1178.10.3390/ma10101178 ↗
24. A.M. Elshazli, R.N. Elshaer, A. Hamid, A. Hussein, and S.R. Al-sayed: Micromachines, 2021, vol. 12, p. 739.10.3390/mi12070739 ↗
25. T. Ctvrtnickova, L. Cabalin, J. Laserna, V. Kanicky, and G. Nicolas: Appl. Surf. Sci., 2009, vol. 255, pp. 5329–33.10.1016/j.apsusc.2008.08.017 ↗
26. J.S. Cowpe, R.D. Moorehead, D. Moser, J.S. Astin, S. Karthikeyan, S.H. Kilcoyne, G. Crofts, and R.D. Pilkington: Spectrochim. Acta, 2011, vol. 66, pp. 290–94.10.1016/j.sab.2011.03.007 ↗
27. K. Ahmad, W. Tawfik, W.A. Farooq, and J.P. Singh: Appl. Phys. A Mater. Sci. Process., 2014, vol. 117, pp. 1315–22.10.1007/s00339-014-8544-7 ↗
28. J. Huang, M. Dong, S. Lu, W. Li, J. Lu, C. Liu, and J.H. Yoo: J. Anal. At. Spectrom., 2018, vol. 33, pp. 720–29.10.1039/C8JA00030A ↗
29. J. Pareja, S. López, D. Jaramillo, D.W. Hahn, and A. Molina: Appl. Opt., 2013, vol. 52, pp. 2470–77.10.1364/AO.52.002470 ↗
30. A.H. Galmed, C.M. Steenkamp, I. Ahmed, H. Von Bergmann, M.A. Harith, and M. Maaza: J. Laser Appl., 2020, vol. 32, 012012.10.2351/1.5122751 ↗
31. K. Tsuyuki, S. Miura, N. Idris, K.H. Kurniawan, T.J. Lie, and K. Kagawa: Appl. Spectrosc., 2006, vol. 60, pp. 61–64.10.1366/000370206775382668 ↗
32. J.A. Varela, J.M. Amado, M.J. Tobar, M.P. Mateo, A. Yañez, and G. Nicolas: Appl. Surf. Sci., 2015, vol. 336, pp. 396–400.10.1016/j.apsusc.2015.01.037 ↗
33. V.N. Lednev, P.A. Sdvizhenskii, R.D. Asyutin, and A.V. Perestoronin: J. Anal. At. Spectrom., 2021, vol. 36, pp. 540–47.10.1039/D0JA00437E ↗
34. V.N. Lednev, P.A. Sdvizhenskii, M.N. Filippov, M.Y. Grishin, V.A. Filichkina, A.Y. Stavertiy, R.S. Tretyakov, A.F. Bunkin, and S.M. Pershin: Appl. Surf. Sci., 2017, vol. 416, pp. 302–07.10.1016/j.apsusc.2017.04.108 ↗
35. P.A. Sdvizhenskii, V.N. Lednev, R.D. Asyutin, M.Y. Grishin, and S.M. Pershin: Moscow Univ. Chem. Bull., 2020, vol. 75, pp. 77–81.10.3103/S0027131420020133 ↗
36. C. Ni, Y. Shi, J. Liu, and G. Huang: Opt. Laser Technol., 2018, vol. 105, pp. 257–63.10.1016/j.optlastec.2018.01.058 ↗
37. L.M. Cabalín, D. Romero, J.M. Baena, and J.J. Laserna: Surf. Interface Anal., 1999, vol. 27, pp. 805–10.10.1002/(SICI)1096-9918(199909)27:9<805::AID-SIA576>3.0.CO;2-K ↗
38. L. Zhu, S. Wang, H. Pan, C. Yuan, and X. Chen: J. Manuf. Process., 2020, vol. 49, pp. 344–54.10.1016/j.jmapro.2019.12.009 ↗
39. I. Lopez-Quintas, V. Piñon, M.P. Mateo, and G. Nicolas: Appl. Surf. Sci., 2012, vol. 258, pp. 9432–36.10.1016/j.apsusc.2012.04.026 ↗
40. H. Sattar, S. Jielin, H. Ran, M. Imran, W. Ding, P. Das-Gupta, and H. Ding: J. Nucl. Mater., 2020, vol. 540, p. 152389.10.1016/j.jnucmat.2020.152389 ↗
41. M.M. Elfaham, W.M. Elthalabawy, O.E. Mohamed, and A.Z.M. Abdelhamid: Appl. Phys. A, 2020, vol. 126, pp. 1–9.10.1007/s00339-020-3348-4 ↗
42. R.H. El-Saeid, M. Abdelhamid, Z. Abdel-Salam, and M. Abdel-Harith: Appl. Phys. B Lasers Opt., 2020, vol. 126, pp. 1–0.10.1007/s00340-019-7356-z ↗
43. S. Messaoud Aberkane, A. Bendib, K. Yahiaoui, S. Boudjemai, S. Abdelli-Messaci, T. Kerdja, S.E. Amara, and M.A. Harith: Appl. Surf. Sci., 2014, vol. 301, pp. 225–29.10.1016/j.apsusc.2014.02.046 ↗
44. T.A. Labutin, A.M. Popov, D.N. Sychev, and N.B. Zorov: Adv. Laser Technol., 2007, vol. 7022, p. 70221C.
45. D.R. Hardoon, S. Szedmak, and J. Shawe-Taylor: Neural Comput., 2004, vol. 16, pp. 2639–64.10.1162/0899766042321814 ↗
46. L. Breiman: Mach. Learn., 2001, vol. 45, pp. 5–32.10.1023/A:1010933404324 ↗
47. J. Snoek, H. Larochelle, and R.P. Adams: Adv. Neural Inf. Process. Syst., 2012, vol. 25, pp. 1–9.
48. D. Youssef, S. Hassab-Elnaby, and S.R. Al-Sayed: Alexandria Eng. J., 2022, vol. 61, pp. 4137–58.10.1016/j.aej.2021.09.014 ↗
49. D.A. Belsley, E. Kuh, and R.E. Welsch: Regression Diagnostics—Identifying Influential Data and Sources of Collinearity, Wiley, Hoboken, NJ, 1980.10.1002/0471725153 ↗
50. D.A. Belsley: Comput. Sci. Econ. Manag., 1991, vol. 4, pp. 33–50.10.1007/BF00426854 ↗
51. T. Perrin, S. Achache, P.J. Meausoone, and F. Sanchette: Surf. Coat. Technol., 2021, vol. 425, 127703.10.1016/j.surfcoat.2021.127703 ↗
52. S. Zhou, J. Lei, X. Dai, J. Guo, Z. Gu, and H. Pan: Int. J. Refract. Met. Hard Mater., 2016, vol. 60, pp. 17–27.10.1016/j.ijrmhm.2016.06.019 ↗
53. R. Nagy, E. Ahmed, M. Elshazli, A. Hamid, A. Hussein, S. Reda, and A. Sayed: Int. J. Adv. Manuf. Technol. https://doi.org/10.1007/s00170-022-09644-910.1007/s00170-022-09644-9 ↗