journal article·2021-09

Grain Refinement Mechanisms in Gradient Nanostructured AZ31B Mg Alloy Prepared via Rotary Swaging

Xin Chen, Chuming Liu, Yingchun Wan, Shunong Jiang, Zhiyong Chen, Yonghao Zhao

Publisher page

Abstract

Gradient nanostructured AZ31B Mg alloy rods were prepared via cold rotary swaging in this study. The swaged sample exhibited the best strength-elongation combination published for the AZ31B Mg alloy. Grain refinement mechanisms during deformation were explored using transmission electron microscopy. The results show that in the initial stage high-density deformation twins first divided the coarse grains into a fine lamellar structure; subsequently, massive dislocation arrays further refined the twin lamellae into finer subgrains; finally, randomly oriented nanograins formed via dynamic recrystallization caused by both deformation heat and increased stored energy. The gradient microstructure along the radial direction was mainly formed by different loading modes. The grains at the center were subjected to loading almost equally from all radial directions, while those at the edge experienced loading only from one direction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. T.M. Pollock: Science., 2010, vol. 328, pp. 986–7.10.1126/science.1182848 ↗
2. B.B. Dong, X. Che, Z.M. Zhang, J.M. Yu, and M. Meng: J. Alloys Compd., 2021, vol. 853, pp. 157066, 1–12.10.1016/j.jallcom.2020.157066 ↗
3. W.J. Kim, Y.G. Lee, M.J. Lee, J.Y. Wang, and Y.B. Park: Scr. Mater., 2011, vol. 65, pp. 1105–8.10.1016/j.scriptamat.2011.09.029 ↗
4. B.Q. Xu, J.P. Sun, Z.Q. Yang, L.R. Xiao, H. Zhou, J. Han, H. Liu, Y. Wu, Y.C. Yuan, X.R. Zhuo, D. Song, J.H. Jiang, and A.B. Ma: Mater. Sci. Eng. A, 2020, vol. 780, pp. 139191, 1–11.10.1016/j.msea.2020.139191 ↗
5. L.R.C. Malheiros, R.B. Figueiredo, and T.G. Langdon: J. Mater. Res. Technol., 2015, vol. 4, pp. 14–7.10.1016/j.jmrt.2014.10.008 ↗
6. H.Q. Sun, Y.N. Shi, M.X. Zhang, and K. Lu: Acta Mater., 2007, vol. 55, pp. 975–82.10.1016/j.actamat.2006.09.018 ↗
7. Y. Estrin and A. Vinogradov: Acta Mater., 2013, vol. 61, pp. 782–817.10.1016/j.actamat.2012.10.038 ↗
8. L. Kunčická, R. Kocich, C. Hervoches, and A. Macháčková: Mater. Sci. Eng. A., 2017, vol. 704, pp. 25–31.10.1016/j.msea.2017.07.096 ↗
9. H. Alkhazraji, E. El-Danaf, M. Wollmann, and L. Wagner: Adv. Mater. Sci. Eng., 2015, vol. 2015, pp. 1–12.10.1155/2015/301837 ↗
10. M.R. Bache, J. O’Hanlon, P.J. Withers, D.J. Child, and M.C. Hardy: Metals., 2016, vol. 6, pp. 54–60.10.3390/met6030054 ↗
11. W.M. Gan, Y.D. Huang, R. Wang, G.F. Wang, A. Srinivasan, H.-G. Brokmeier, N. Schell, K.U. Kainer, and N. Hort: Mater. Des., 2014, vol. 63, pp. 83–8.10.1016/j.matdes.2014.05.057 ↗
12. L.L. Chang, S.B. Kang, and J.H. Cho: Mater. Des., 2013, vol. 44, pp. 144–8.10.1016/j.matdes.2012.07.052 ↗
13. L.C. Tang, C.M. Liu, Z.Y. Chen, D.W. Ji, and H.C. Xiao: Mater. Des., 2013, vol. 50, pp. 587–96.10.1016/j.matdes.2013.03.054 ↗
14. J.L. Zhang, H. Xie, Z.L. Lu, Y. Ma, S.P. Tao, and K. Zhao: Results Phys., 2018, vol. 10, pp. 967–72.10.1016/j.rinp.2018.08.028 ↗
15. H. Miura, G. Yu, and X. Yang: Mater. Sci. Eng. A., 2011, vol. 528, pp. 6981–92.10.1016/j.msea.2011.05.050 ↗
16. F.R. Cao, J. Zhang, X. Ding, G.Q. Xue, S.Y. Liu, C.F. Sun, R.K. Su, and X.M. Teng: Mater. Sci. Eng. A., 2019, vol. 760, pp. 377–93.10.1016/j.msea.2019.06.009 ↗
17. H.Q. Sun, Y.N. Shi, and M.-X. Zhang: Wear., 2009, vol. 266, pp. 666–70.10.1016/j.wear.2008.08.004 ↗
18. S.Q. Zhu, H.G. Yan, J.H. Chen, Y.Z. Wu, B. Su, Y.G. Du, and X.Z. Liao: Scr. Mater., 2012, vol. 67, pp. 404–7.10.1016/j.scriptamat.2012.05.036 ↗
19. I. Ulacia, N.V. Dudamell, F. Gálvez, S. Yi, M.T. Perez-Prado, and I. Hurtado: Acta Mater., 2010, vol. 58, pp. 2988–98.10.1016/j.actamat.2010.01.029 ↗
20. S.Q. Zhu, H.G. Yan, J.H. Chen, Y.Z. Wu, J.Z. Liu, and J. Tian: Scr. Mater., 2010, vol. 63, pp. 985–8.10.1016/j.scriptamat.2010.07.029 ↗
21. Y.Z. Wu, H.G. Yan, J.H. Chen, Y.G. Du, S.Q. Zhu, and B. Su: Mater. Sci. Eng. A., 2012, vol. 556, pp. 164–9.10.1016/j.msea.2012.06.074 ↗
22. Y.C. Wan, B. Tang, Y.H. Gao, L.L. Tang, G. Sha, B. Zhang, N.N. Liang, C.M. Liu, S.N. Jiang, Z.Y. Chen, X.Y. Guo, and Y.H. Zhao: Acta Mater., 2020, vol. 200, pp. 274–86.10.1016/j.actamat.2020.09.024 ↗
23. M.G. Jiang, C. Xu, H. Yan, G.H. Fan, T. Nakata, C.S. Lao, R.S. Chen, S. Kamado, E.H. Han, and B.H. Lu: Acta Mater., 2018, vol. 157, pp. 53–71.10.1016/j.actamat.2018.07.014 ↗
24. F.L. Wang, C.D. Barrett, R.J. McCabe, H.E.I. Kadiri, L. Capolungo, and S.R. Agnew: Acta Mater., 2019, vol. 165, pp. 471–85.10.1016/j.actamat.2018.12.003 ↗
25. S. Cheng, J.A. Spencer, and W.W. Milligan: Acta Mater., 2003, vol. 51, pp. 4505–18.10.1016/S1359-6454(03)00286-6 ↗
26. W.Z. Chen, W.C. Zhang, H.Y. Chao, L.X. Zhang, and E.D. Wang: Mater. Sci. Eng. A., 2015, vol. 623, pp. 92–6.10.1016/j.msea.2014.11.049 ↗
27. W.T. Lee, S.X. Ding, D.K. Sun, C.I. Hsiao, C.P. Chang, L. Chang, and P.W. Kao: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 2909–16.10.1007/s11661-011-0670-7 ↗
28. J.J. Ma, X.Y. Yang, Q.H. Huo, H. Sun, J. Qin, and J. Wang: Mater. Des., 2013, vol. 47, pp. 505–9.10.1016/j.matdes.2012.12.039 ↗
29. S.X. Ding, W.T. Lee, C.P. Chang, L.W. Chang, and P.W. Kao: Scr. Mater., 2008, vol. 59, pp. 1006–9.10.1016/j.scriptamat.2008.07.007 ↗
30. Q. Yang and A.K. Ghosh: Acta Mater., 2006, vol. 54, pp. 5159–70.10.1016/j.actamat.2006.06.043 ↗
31. D. Liu, M.Z. Bian, S.M. Zhu, W.Z. Chen, Z.Y. Liu, E.D. Wang, and J.F. Nie: Mater. Sci. Eng. A., 2017, vol. 706, pp. 304–10.10.1016/j.msea.2017.09.018 ↗
32. X.P. Li, X.H. Li, Y.D. Ye, R.K. Zhang, S.-Z. Kure-Chu, and G.Y. Tang: Mater. Sci. Eng. A., 2019, vol. 742, pp. 722–33.10.1016/j.msea.2018.09.041 ↗
33. W.B. Fang, W. Fang, and H.F. Sun: Powder Technol., 2011, vol. 212, pp. 161–5.10.1016/j.powtec.2011.05.006 ↗
34. R. Alizadeh, R. Mahmudi, A.H.W. Ngan, Y. Huang, and T.G. Langdon: Mater. Sci. Eng. A., 2016, vol. 651, pp. 786–94.10.1016/j.msea.2015.10.094 ↗
35. L. Li, O. Muránsky, E.A. Flores-Johnson, S. Kabra, L.M. Shen, and G. Proust: Mater. Sci. Eng. A., 2017, vol. 684, pp. 37–46.10.1016/j.msea.2016.12.015 ↗
36. Y.M. Zhu, S.W. Xu, and J.F. Nie: Acta Mater., 2018, vol. 143, pp. 1–12.10.1016/j.actamat.2017.09.067 ↗
37. X.Y. Shi, A.A. Luo, S.C. Sutton, L. Zeng, S.Y. Wang, X.Q. Zeng, D.J. Li, and W.J. Ding: J. Alloys Compd., 2015, vol. 650, pp. 622–32.10.1016/j.jallcom.2015.08.020 ↗
38. L.H. Mao, C.M. Liu, T. Chen, Y.H. Gao, S.N. Jiang, and R.K. Wang: Scr. Mater., 2018, vol. 150, pp. 87–91.10.1016/j.scriptamat.2018.03.005 ↗
39. M.G. Jiang, H. Yan, and R.S. Chen: J. Alloys Compd., 2015, vol. 650, pp. 399–409.10.1016/j.jallcom.2015.07.281 ↗
40. H. Miura, M. Kobayashi, T. Aoba, H. Aoyama, and T. Benjanarasuth: Mater. Sci. Eng. A., 2018, vol. 731, pp. 603–8.10.1016/j.msea.2018.06.060 ↗
41. B.Z. Wang, B. Tang, C. You, Y.C. Wan, Y.H. Gao, Z.Y. Chen, L.W. Lu, C.M. Liu, and J. Wang: Mater. Sci. Eng. A, 2020, vol. 775, pp. 138789, 1–11.10.1016/j.msea.2019.138789 ↗
42. B. Li, E. Ma, and K.T. Ramesh: Metall. Mater. Trans. A., 2008, vol. 39A, pp. 2607–14.10.1007/s11661-008-9621-3 ↗
43. B. Li, Q.W. Zhang, and S.N. Mathaudhu: Scr. Mater., 2017, vol. 134, pp. 37–41.10.1016/j.scriptamat.2017.02.040 ↗
44. D.-H. Kim, F. Ebrahimi, M.V. Manuel, J.S. Tulenko, and S.R. Phillpot: Mater. Sci. Eng. A., 2011, vol. 528, pp. 5411–20.10.1016/j.msea.2011.02.082 ↗
45. S.W. Lee, S.-H. Kim, W.-K. Jo, W.-H. Hong, W. Kim, B.G. Moon, and S.H. Park: J. Alloys Compd., 2019, vol. 791, pp. 700–10.10.1016/j.jallcom.2019.03.316 ↗
46. S.Q. Zhu and S.P. Ringer: Acta Mater., 2018, vol. 144, pp. 365–75.10.1016/j.actamat.2017.11.004 ↗
47. X.Y. Zhang, B. Li, and Q. Liu: Acta Mater., 2015, vol. 90, pp. 140–50.10.1016/j.actamat.2015.02.036 ↗
48. K. Wei, L.R. Xiao, B. Gao, L. Li, Y. Liu, Z.G. Ding, W. Liu, H. Zhou, and Y.H. Zhao: J. Magnes. Alloy., 2020, vol. 8, pp. 1221–7.10.1016/j.jma.2019.09.015 ↗
49. S. Sandlöbes, Z. Pei, M. Friák, L.F. Zhu, F. Wang, S. Zaefferer, D. Raabe, and J. Neugebauer: Acta Mater., 2014, vol. 70, pp. 92–104.10.1016/j.actamat.2014.02.011 ↗
50. T. Sakai, H. Miura, A. Goloborodko, and O. Sitdikov: Acta Mater., 2009, vol. 57, pp. 153–62.10.1016/j.actamat.2008.09.001 ↗