Effect of Al Content on Hot-Tearing Susceptibility of Mg-10Zn-xAl Alloys
Source abstract
Abstract
The hot-tearing susceptibility of Mg-10Zn-xAl (x = 0, 2, 5, and 7) alloys was studied using constrained rod casting installed with a load cell, thermocouple, and data-management system. Addition of Al content reduced the freezing range and increased the liquid fraction at the end of the primary stage of solidification, during the vulnerable period of alloy solidification. Eutectic healing was observed in alloys containing Al cast at a higher initial mold temperature due to near-equilibrium solidification. Grain refining was confirmed at the microstructural level due to addition of Al. The results also suggested that increasing Al content enabled hot-tearing resistance of Mg-10Zn alloy by facilitating liquid feed for the strain developed during the mid-stage of solidification (0.65Fs to 0.74Fs). Experimental results were compared with Pandat’s simulation results to predict the occurrence of hot tearing in Mg-10Zn-xAl alloys. This indicated that Pandat’s solidification curve could be used to determine the hot-tearing nature of Mg-Zn alloys. The recently proposed hot-tearing criteria of Kou and Clyne–Davie roughly agreed with the experimental results, but did not perfectly predict the influence of different casting conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. M.K. Kulekci: Int. J. Adv. Manuf. Tech., 2008, vol. 39, pp. 851-865.10.1007/s00170-007-1279-2 ↗
2. A.A. Luo: Int. Mater. Rev., 2004, vol. 49, pp. 13-30.10.1179/095066004225010497 ↗
3. M.M. Avedesian and H. Baker: Magnesium and Magnesium Alloys, ASM Speciality Handbook, ASM International, Materials Park, OH, 1999.
4. T.W. Clyne and G.J. Davies: Br. Foundryman, 1981, vol. 74, pp. 65-73.
5. M.A. Easton, T.B. Abbott, J.F. Nie, and G. Savage: Magnesium Technology, 2008, pp. 323–28.
6. W.F. Mo, L. Zhang, G.H. Wu, Y. Zhang, W.C. Liu and C.L. Wang: Mater. Des., 2014, vol. 63, pp. 729-737.10.1016/j.matdes.2014.07.005 ↗
7. G. Cao, C. Zhang, H. Cao, Y.A. Chang and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 706-716.10.1007/s11661-009-0134-5 ↗
8. T.W. Clyne and G.J. Davies: Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 275-278.
9. Suyitno, W.H. Kool and L. Katgerman: Mater. Sci. Forum., 2002, vols. 396-402, pp. 179–84.10.4028/www.scientific.net/MSF.396-402.179 ↗
10. S. Kou: Acta Mater., 2015, vol. 88, pp. 366-374.10.1016/j.actamat.2015.01.034 ↗
11. M. Rappaz, J.M. Drezet and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449-455.10.1007/s11661-999-0334-z ↗
12. Z.S. Zhen, N. Hort, Y.D. Huang, N. Petri, O. Utke and K.U. Kainer: Mater. Sci. Forum., 2009, vols. 618-619, pp. 533-540.10.4028/www.scientific.net/MSF.618-619.533 ↗
13. L. Zhou, Y.D. Huang, P.L. Mao, K.U. Kainer, Z. Liu and N. Hort: Int. J. Cast Metal. Res., 2013, vol. 24, pp. 170-176.10.1179/136404611X13001912813942 ↗
14. D.H. StJohn, Q. Ma, M.A. Easton, P. Cao and Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1669-1679.10.1007/s11661-005-0030-6 ↗
15. H. Huang, P.H. Fu, Y.X. Wang, L.M. Peng and H.Y. Jiang: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 922-929.10.1016/S1003-6326(14)63144-7 ↗
16. G. Cao and S. Kou: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3647-3663.10.1007/s11661-006-1059-x ↗
17. Z. Wang, J.F. Song, Y.D. Huang, A. Srinivasan, Z. Liu, K.U. Kainer and N. Hort: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2108-2118.10.1007/s11661-015-2755-1 ↗
18. J.F. Song, Z. Wang, Y.D. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer and N. Hort: J. Mater. Sci., 2016, vol. 51, pp. 2687-2704.10.1007/s10853-015-9583-y ↗
19. J.F. Song, Z. Wang, Y.D. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer and N. Hort: Mater. Des., 2015, vol. 87, pp. 157-170.10.1016/j.matdes.2015.08.026 ↗
20. Y.S. Wang, B.D. Sun, Q.D. Wang, Y.P. Zhu and W.J. Ding: Mater. Lett., 2002, vol. 53, pp. 35-39.10.1016/S0167-577X(01)00449-9 ↗
21. G. Cao and S. Kou: Mater. Sci. Eng. A, 2006, vol. 417, pp. 230-238.10.1016/j.msea.2005.10.050 ↗
22. G. Cao, I. Haygood and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2139-2150.10.1007/s11661-010-0248-9 ↗
23. L. Zhou, Y.D. Huang, P.L. Mao, K.U. Kainer, Z. Liu, and N. Hort: Magnesium Technology, 2011, pp. 125–30.10.1002/9781118062029.ch24 ↗
24. J. Zhang, R.L. Zuo, Y.X. Chen, F.S. Pan and X.D. Luo: J. Alloys Compd., 2008, vol. 448, pp. 316-320.10.1016/j.jallcom.2006.10.135 ↗
25. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, 1974, pp. 252-256.
26. Pandat-Phase Diagram Calculation Software Package for Multicomponent Systems, CompuTherm LLC, Madison, WI 53719, 2001.
27. D. Argo, M. Pekguleryuz, P. Vermette, and M. Lefebvre: Die Casting. North American Die Casting Association, Chicago, IL, pp. 181-186, 2001.
28. T.W. Clyne and G.J. Davies: Br. Foundryman, 1975, vol. 68, pp. 238-244.
29. Z. Wang, Y.D. Huang, A. Srinivasan, Z. Liu, F. Beckmann, K.U. Kainer and N. Hort: Mater. Des., 2013, vol. 47, pp. 90-100.10.1016/j.matdes.2012.12.044 ↗
30. D.G. Eskin, S. Suyitno and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629-711.10.1016/S0079-6425(03)00037-9 ↗
31. M.A. Easton, J.F. Grandfield, D.H. StJohn and B. Rinderer: Mater. Sci. Forum, 2006, vols. 519-521, pp. 1675-1680.10.4028/www.scientific.net/MSF.519-521.1675 ↗
32. A. Srinivasan, Z. Wang, Y.D. Huang, F. Beckmann, K.U. Kainer and N. Hort: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2285-2298.10.1007/s11661-012-1593-7 ↗
33. J.F. Nie: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3891-3939.10.1007/s11661-012-1217-2 ↗
34. W.L. Xiao, S.M. Zhu, M.A. Easton, M.S. Dargusch, M.A. Gibson and J.F. Nie: Mater. Charact., 2012, vol. 65, pp. 28-36.10.1016/j.matchar.2012.01.001 ↗
35. L. Bourgeois, B.C. Muddle and J.F. Nie: Acta Mater., 2001, vol. 49, pp. 2701-2711.10.1016/S1359-6454(01)00162-8 ↗
36. L. Bourgeois, C.L. Mendis, B.C. Muddle and J.F. Nie: Phil. Mag. Lett., 2001, vol. 81, pp. 709-718.10.1080/09500830110073959 ↗
37. J.F. Song, Z. Wang, Y.D. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer and N. Hort: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 6003-6017.10.1007/s11661-015-3165-0 ↗
38. J.W. Liu and S. Kou: Acta Mater., 2015, vol. 100, pp. 359-368.10.1016/j.actamat.2015.08.064 ↗
39. J.W. Liu and S. Kou: Acta Mater., 2016, vol. 110, pp. 84-94.10.1016/j.actamat.2016.03.030 ↗