journal article·2019-09-15Open access

On the Evolution of Primary Gamma Prime Precipitates During High Temperature and High Strain Rate Deformation and Subsequent Heat Treatment in the Ni-Based Superalloy, RR1000

N. D’Souza, W. Li, C. Argyrakis, G. D. West, C. D. Slater

Abstract

Abstract The microstructural evolution following compression and subsequent sub-solvus and super-solvus heat treatment was studied in the Ni-based superalloy, RR1000, typically used for rotor disc applications in aero-engines. For a low strain rate of 0.1 s−1 at close to solvus temperature, 1413 K (1140 °C), the flow stress is constant. For larger strain rates of 1 and 10 s−1 at sub-solvus temperature, 1373 K (1100 °C) dynamic re-crystallization (DRX) of γ grains occurs during forging with accompanying stress decay. Incoherent primary γ′ precipitates form mainly via meta-dynamic re-crystallization (MDRX) at 1 s−1 and are as intergranular. For 10 s−1, the coherently nucleated or existing precipitates present in the initial as-HIP condition become incoherent when the grain boundary sweeps past them during DRX and subsequent grain growth. The incoherent primary γ′ precipitates are mainly intragranular. During sub-solvus heat treatment at 1373 K (1100 °C), dissolution of the incoherent precipitates occurs through coarsening of the coherent intragranular population with only sporadic incoherent precipitates remaining. The prior induced deformation (strain and strain rate) influences the evolution of precipitate morphologies during cooling following heating to super-solvus temperature. Using numerical simulations, a quantitative calculation of the different precipitate morphologies was carried out during slow cooling from super-solvus temperature, 1443 K to 1373 K (1170 °C to 1100 °C).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. I.M.D. Parr, T.J. Jackson, M.C. Hardy, D. Child, C. Argyrakis, K. Severs. V. Saraf, and J.M. Stumpf: in Proc. of the 13th Int. Symp. on Superalloys, Superalloys 2016, M.C. Hardy et al., eds., The Minerals Metals & Materials Soc., pp. 447–56.10.1002/9781119075646.ch48 ↗
2. S.S. SatheeshKumar, T. Raghu, P.P. Bhattacharjee, G. AppaRao, U. Borah: J. Alloy Comp, 2016, Vol. 681, pp. 28 - 42.10.1016/j.jallcom.2016.04.185 ↗
3. M-A. Charpagne, J-M. Franchet, N. Bozzolo: Mater. Des, 2018, Vol. 144, pp. 353 – 360.10.1016/j.matdes.2018.02.048 ↗
4. A. Seret, C. Moussa, M. Bernacki, N. Bozzolo: Metall. Mater. Trans. A, 2018, Vol. 49A, pp. 4199 – 4213.10.1007/s11661-018-4707-z ↗
5. H. Jiang, L. Yang, J. Dong, M. Zhang, Z. Yao: Mater. Des, 2016, Vol. 104, pp. 162 – 173.10.1016/j.matdes.2016.05.033 ↗
6. Y. Wang, S. L. Zhen, L. Yang, X. M. Zhang: Mat. Sci. Eng. A, 2008, Vol. 497A, pp. 479 – 486.10.1016/j.msea.2008.07.046 ↗
7. A. A. Guimares, J. J. Jonas: Metall. Trans. A, 1981, Vol. 12A, pp. 1655 – 1666.10.1007/BF02643571 ↗
8. J. Wang, J. Dong, M. Zhang, X. Xie: Mater. Sci. Eng. A, 2013, Vol. 566A, pp. 61 – 70.10.1016/j.msea.2012.12.077 ↗
9. D.-X. Wen, Y.C.X. Lin, H.-B. Li, X.-M. Chen, J. Deng, L.-T. Li: Mater. Sci. Eng. A, 2014, Vol. 591A, pp. 183 – 192.10.1016/j.msea.2013.09.049 ↗
10. H. Zhang, K. Zhang, H. Zhou, Z. Lu, C. Zhao, X. Yang: Mater. Des, 2015, Vol. 80, pp. 51 - 62.10.1016/j.matdes.2015.05.004 ↗
11. M-A. Charpagne, T. Billot, J-M. Franchet, N. Bozzolo: J. Alloy Comp., 2016, Vol. 688, pp. 685 – 694.10.1016/j.jallcom.2016.07.240 ↗
12. S. L. Semiatin, J. M. Shank, A. R. Shiveley, W. M. Saurber, E. F. Gaussa, A. L. Pilchak: Metall. Mater. Trans. A, 2014, Vol. 45A, pp. 6231 - 6251.10.1007/s11661-014-2572-y ↗
13. D. M. Collins, B. D. Conduit, H. J. Stone, M. C. Hardy, G. J. Conduit, R. J. Mitchell: Acta Mater., 2013, Vol. 61, pp. 3378 - 3391.10.1016/j.actamat.2013.02.028 ↗
14. M. S. Lewandowski, R. A. Overfelt: Acta Mater., 1999, Vol. 47, pp. 4695 – 4710.10.1016/S1359-6454(99)00252-9 ↗
15. K. Huang, R. E. Loge: Mater. Des., 2016, Vol. 111, pp. 578 – 574.10.1016/j.matdes.2016.09.012 ↗
16. Y. Q. Chen, T. J. A. Slater, E. A. Lewis, E. M. Francis, M. G. Burke, M. Preuss, S. Haigh: Ultramicroscopy, 2014, Vol. 144, pp. 1 – 8.10.1016/j.ultramic.2014.04.001 ↗
17. A. R. P. Singh, S. Nag, S. Chattopadhyay, Y. Re, J. Tiley, G. B. Viswanathan, H. L. Fraser, R. Banerjee: Acta Materialia, 2013, Vol. 61, pp. 280 - 293.10.1016/j.actamat.2012.09.058 ↗
18. C. Papadaki, W. Li, A. M. Korsunsky: Materials, 2018, Vol. 11, 1528; DOI: 10.3390.
19. Y. Q. Chen, E. Francis, J. Robson, M. Preuss, S. J. Haigh: Acta Materialia, 2015, Vol. 85, pp. 199 – 206.10.1016/j.actamat.2014.11.009 ↗
20. S.J. Hessel, W. Voice, A.W. James, S.A. Blackham, C.J. Small, and M.R. Winstone: Nickel Alloy for Turbine Engine Component, US Patent 6132527, 2000.
21. R. L. Goetz, S. L. Semiatin: Journal of Materials Engineering and Performance, 2001, Vol. 10, pp 710 -717.10.1361/105994901770344593 ↗
22. W. Pantleon, D. Francke, P. Klimanek: Computational Materials Science, 1996, Vol. 7, pp 75 - 81.10.1016/S0927-0256(96)00063-8 ↗
23. DEFORM® is a registered trademark of Scientific Forming Technologies Corporation, 2545 Farmers Drive, Suite 200, Columbus, OH
24. F.J. Humphreys and M. Hatherley: Recrystallization and Related Phenomena. Elsevier Science Ltd., Oxford, 1996, Chapters 3 and 9.
25. D.M. Collins: PhD Thesis, University of Cambridge, UK, 2011.
26. A. Porter, B. Ralph: J. Mat. Sci., 1981, Vol. 16, pp. 707 – 13.10.1007/BF02402788 ↗
27. V. Randle, B. Ralph: Acta Metall., 1986, Vol. 34, pp. 891 – 898.10.1016/0001-6160(86)90062-3 ↗
28. R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Polt, E. Kozechnik: Acta Materialia, 2009, Vol. 57, pp. 5739 - 5747.10.1016/j.actamat.2009.08.002 ↗
29. T.P. Gabb, D.G. Blackman, D.Y. Wei, D.P. Mourer, D. Furrer, A. Garg, and D.L. Ellis: in Proc. of the 9th Int. Symp. On Superalloys, Superalloys 2000, T.M. Pollock et al., eds., The Minerals Metals and Materials Soc., 2000, pp. 405–14.
30. J. W. Cahn: Acta Metall., 1956, Vol. 4, pp. 572 – 575.10.1016/0001-6160(56)90158-4 ↗
31. Thermo-Calc 2016a, TCNI8/MOBNI4, Thermo-Calc Software AB, Råsundavägen 18, 169 67 Solna, Sweden.
32. D. Porter and K. Easterling: Phase Transformations in Metals and Alloys, 2nd eds, CRC Press, Boca Raton, 1992.10.1007/978-1-4899-3051-4 ↗
33. K. Kim, P. W. Voorhees, Acta Materialia, 2018, Vol. 152, pp. 327 – 337.10.1016/j.actamat.2018.04.041 ↗
34. E. Kozeschnik, J. Svoboda: Mater. Sci. Eng. A, 2006, Vol. 441, pp. 68 – 72.10.1016/j.msea.2006.08.088 ↗
35. J. Svoboda, F. D. Fischer, P. Fraftzl, E. Kozeschnik: Mater. Sci. Eng. A, 2004, Vol. 385, pp. 166 – 174.
36. M. Perez, M. Dumont, D. Acevedo-Reyes: Acta Materialia, 2008, Vol. 56, pp. 2119 – 2132.10.1016/j.actamat.2007.12.050 ↗
37. S. S. Babu, M. K. Miller, J. M. Vitek, S. A. David: Acta Materialia, 2013, Vol. 61, pp. 280 - 293.10.1016/j.actamat.2012.09.058 ↗
38. J. Svoboda, F.D. Fischer, P. Fratzl, E. Kozeschnik: Materials Science and Engineering A, 2004, Vol. 385(1–2): p. 166 - 174.
39. M.J. Anderson, C. Panwisawas, Y. Sovani, R.P. Turner, J.W. Brooks, H.C. Basoalto: Acta Materialia, 2018, Vol. 156, pp. 432 - 445.10.1016/j.actamat.2018.07.002 ↗
40. G.B. Olson, H.-J. Jou, J. Jung, J.T. Sebastian, A. Misra, I. Locci and D. Hull: in Proc. of the 11th Int. Symp. on Superalloys, Superalloys 2008, The Minerals Metals and Materials Society, 2008, pp. 923–32.
41. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, and A. Devaux: Sci. Rep., 2016, 6:2865010.1038/srep28650 ↗