Retrogression and Reaging Applied to Warm Forming of High-Strength Aluminum Alloy AA7075-T6 Sheet
Source abstract
Abstract
Abstract This study introduces retrogression forming, a new warm-forming methodology for high-strength aluminum alloys such as AA7075-T6. Retrogression forming combines a retrogression heat treatment with simultaneous warm forming at approximately 200 °C to improve upon the room-temperature ductility of AA7075-T6, approximately 10 pct in tension, and can then use the automotive paint-bake cycle to restore nearly peak-aged strength. Experimental data indicate that retrogression forming at 200 °C provides a tensile ductility of 20 pct, approximately double that of room temperature, and that subsequent reaging by a simulated paint bake restores hardness to within 10 pct of the original peak-aged (T6) hardness. To explore the retrogression-forming concept, the retrogression behaviors of two AA7075-T6 sheet materials from different suppliers are characterized between 200 °C and 350 °C. The times and temperatures of retrogression treatments suitable for simultaneous warm forming are determined, and tensile ductilities under these conditions are measured. Tensile ductilities during high-temperature deformation (up to 520 °C) are measured and compared to those possible under retrogression-forming conditions. Plastic flow at temperatures of 460 °C to 520 °C is governed by dislocation-climb-controlled creep, a mechanism different from the behaviors observed under retrogression-forming conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. M. Kahl (ed.): Special Report: Vehicle Lightweighting, Automotive World Ltd., 2016. https://www.automotiveworld.com/research/special-report-vehicle-lightweighting. Accessed December 2017.
2. General Motors 2017 Sustainability Report. https://www.gmsustainability.com/_pdf/downloads/GM_2017_SR.pdf. Accessed August 2018.
3. G.J. Huebner Jr. and D.J. Gasser: SAE Tech. Pap. Ser., 1973, no. 730518.
4. D.G. Adams, J.A. DiCello, C. Hoppe, A.S. Kasper, A.N. Keisoglou, and W.W. McVinnie: SAE Tech. Pap. Ser., 1975, no. 750221.
5. M. Pfestorf and J. van Rensburg: SAE Tech. Pap. Ser., 2006, no. 2006-01-1405.
6. M. Verbrugge, T. Lee, P. Krajewski, A. Sachdev, C. Bjelkengren, R. Roth, and R. Kirchain: Mater. Sci. Forum, 2009, vol. 618, pp. 411-418.10.4028/www.scientific.net/MSF.618-619.411 ↗
7. H. Kim, G. A. Keoleian, and S. J. Skerlos: J. Ind. Ecol., 2011, vol. 15, pp. 64-80.10.1111/j.1530-9290.2010.00288.x ↗
8. A. I. Taub, P. E. Krawjewski, A. A. Luo, and J. N. Owens: JOM, 2007, vol. 59, pp. 48-57.10.1007/s11837-007-0022-7 ↗
9. G. S. Cole and A. M. Sherman: Mater. Charact., 1995, vol. 35, pp. 3-9.10.1016/1044-5803(95)00063-1 ↗
10. X. Fan, Z. He, W. Zhou, and S. Yuan: J. Mater. Process. Technol., 2016, vol. 228, pp. 179-185.10.1016/j.jmatprotec.2015.10.016 ↗
11. X. Fan, Z. He, S. Yuan, and K. Zheng: Mater. Sci. Eng. A, 2013, vol. 573, pp. 154-160.10.1016/j.msea.2013.02.058 ↗
12. AMAG Austria Metall AG AluReport03.2014. https://www.amag-al4u.com/fileadmin/user_upload/amag/Downloads/AluReport/EN/AR-2014-3-EN-S14-15-.pdf. Accessed December 2017.
13. N. R. Harrison and S. G. Luckey: SAE International Journal of Materials and Manufacturing., 2014, vol. 7, pp. 567-573.10.4271/2014-01-0981 ↗
14. A. A. Luo: JOM, 2002, vol. 54, pp. 42-48.10.1007/BF02701073 ↗
15. ASM International: ASM Handbook Volume 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., ASM International, Materials Park, 1990, pp. 29–61.
16. H. Wang, Y. Luo, P. Friedman, M. Chen, and L. Gao: Trans. Nonferrous Metals Soc. China, 2012, vol. 22, pp. 1-7.10.1016/S1003-6326(11)61131-X ↗
17. N. Sotirov, P. Simon, C. Chimani, D. Uffelmann, and C. Mezler: Key Eng. Mater., 2012, vol. 504, pp. 955-960.10.4028/www.scientific.net/KEM.504-506.955 ↗
18. M. Zhou, Y. C. Lin, J. Deng, and Y. Jiang: Mater. Des., 2014, vol. 59, pp. 141-150.10.1016/j.matdes.2014.02.052 ↗
19. J.R. Davis (ed.): ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International, Materials Park, 1993, pp. 72-73.
20. E. M. Taleff, P. J. Nevland, and P. E. Krajewski: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1119-113010.1007/s11661-001-0123-9 ↗
21. P. F. Bariani, S. Bruschi, A. Ghiotti, and F. Michieletto: CIRP Ann-Manuf. Technol., 2013, vol. 62, pp. 251-254.10.1016/j.cirp.2013.03.050 ↗
22. F. Ozturk, A. Sisman, S. Toros, S. Kilic, and R.C. Picu: Mater. Des., 2010, vol. 31, pp. 972-975.10.1016/j.matdes.2009.08.017 ↗
23. D. Daniel, J.L. Hoffmann, G. Plassart, and J. Prunier: SAE Tech. Pap. Ser., 2002, no. 2002-01-2012.
24. S.J. Murtha: SAE Tech. Pap. Ser., 1995, no. 950718.
25. R. G. Davies: Metall. Trans. A, 1979, vol. 10, pp. 113-118.10.1007/BF02686414 ↗
26. M. S. Rashid: Annu. Rev. Mater. Sci., 1981, vol. 11, pp. 245-266.10.1146/annurev.ms.11.080181.001333 ↗
27. J.H. Bucher and E.G. Hamburg: SAE Tech. Pap. Ser., 1977, no. 770164.
28. J. K. Park and A. J. Ardell: Metall. Trans. A, 1983, vol. 14, pp. 1957-1965.10.1007/BF02662363 ↗
29. J.T. Carter: General Motors Corp., Warren, MI, private communication, 2017.
30. B.M. Cina: U.S. Patent 3,856,584, 1974.10.1136/bmj.3.5930.584-b ↗
31. J.K. Park: Mater. Sci. Eng. A, 1988, vol. 103, pp. 223-231.10.1016/0025-5416(88)90512-5 ↗
32. [32]M. Kanno, I. Araki, and Q. Cui: Mater. Sci. Technol., 1994, vol. 10, pp. 599-603.10.1179/mst.1994.10.7.599 ↗
33. K. Rajan, W. Wallace, and J. C. Beddoes: J. Mater. Sci., 1982, vol. 17, pp. 2817-2824.10.1007/BF00644656 ↗
34. J. K. Park and A. J. Ardell: Metall. Mater. Trans. A, 1984, vol. 15, pp. 1531-1543.10.1007/BF02657792 ↗
35. N. C. Danh, K. Rajan, and W. Wallace: Metall. Trans. A, 1983, vol. 14, pp. 1843-1850.10.1007/BF02645554 ↗
36. F. Viana, A. M. P. Pinto, H. M. C. Santos, A. B. Lopes: J. Mater. Process. Technol., 1999, vol. 92, pp. 54-59.10.1016/S0924-0136(99)00219-8 ↗
37. D. C. Balderach, J. A. Hamilton, E. Leung, M. C. Tejeda, J. Qiao, and E. M. Taleff: Mater. Sci. Eng. A, 2003, vol. 339, pp. 194-204.10.1016/S0921-5093(02)00158-2 ↗
38. Registration Record Series Teal Sheets: International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys: The Aluminum Association, January 2015, p. 12.
39. Alcoa Mill Products: Alloy 7075 Plate and Sheet. http://www.calm-aluminium.com.au/Documents/alloy7075techsheet.pdf. Accessed December 2017.
40. L. J. Barker: Trans. Am. Soc. Metals, 1950, vol. 42, pp. 347-356.
41. ASTM Standard E112-13: ASTM International, 2013.
42. G.E. Totten (ed.): ASM Handbook Volume 4E: Heat Treating of Nonferrous Alloys, ASM International, Materials Park, 2016, pp. 214–95.10.31399/asm.hb.v04e.9781627081696 ↗
43. ASTM Standard E8/E8M-16a: ASTM International, Materials Park, 2016.
44. ASTM Standard E21-09: ASTM International, Materials Park, 2009.
45. ASTM Standard E2448-11e1: ASTM International, Materials Park, 2011.
46. S. Arrhenius: Z. Phys. Chem. (Leipzig), 1889, vol. 4, pp. 96-116.10.1515/zpch-1889-0408 ↗
47. J. E. Hilliard, B. L. Averbach, and M. Cohen: Acta. Metall., 1959, vol. 7, pp. 86-92.10.1016/0001-6160(59)90113-0 ↗
48. N. L. Peterson and S. J. Rothman: Phys. Rev. B, 1970, vol. 1, pp. 3264-3273.10.1103/PhysRevB.1.3264 ↗
49. S. Fujikawa and K. Hirano: Trans. Jpn. Inst. Metals, 1976, vol. 17, pp. 809-818.10.2320/matertrans1960.17.809 ↗
50. K. Hirano and S. Fujikawa: J. Nucl. Mater., 1978, vol. 69, pp. 564-566.10.1016/0022-3115(78)90275-1 ↗
51. D. L. Beke, I. Gödény, F. J. Kedves: Philos. Mag. A, 1983, vol. 47, pp. 281-299.10.1080/01418618308245224 ↗
52. W. Koster: Z. Metallkd., 1948, vol. 39, pp. 1-12.
53. O. D. Sherby and P. M. Burke: Prog. Mater. Sci., 1968, vol. 13, pp. 323-390.10.1016/0079-6425(68)90024-8 ↗
54. D. A. Miller and T. G. Langdon: Trans. Jpn. Inst. Metals, 1980, vol. 21, pp. 123-125.10.2320/matertrans1960.21.123 ↗