journal article·2019-03-15

Localized Changes of Stainless Steel Powder Characteristics During Selective Laser Melting Additive Manufacturing

D. Galicki, F. List, S. S. Babu, A. Plotkowski, H. M. Meyer, R. Seals, C. Hayes

Publisher page

Abstract

In laser powder bed additive manufacturing processes, feedstock materials are often recycled after each build. Currently, a knowledge gap exists regarding powder reuse effects on powder size distribution, morphology, and chemistry as a function of part geometry and processing conditions. It was found during selective laser melting (SLM) of 316 stainless steel that a significant amount of (0.100 wt pct) oxygen pickup can occur in molten material (spatter) ejected from the powder bed surface. This value was significantly larger than the oxygen content of the as-received powder feedstock (0.033 wt pct). Furthermore, the powders in the heat-affected-zone regions, adjacent to molten pool, also exhibit oxygen pickup (≥ 0.043 wt pct). The oxygen content in unmelted 316L powder was found to vary as a function of its spatial position in the powder bed, relative to the heat source. Interestingly, the volume of melted material (i.e., thin vs thick walls) did not correlate well with the extent of oxygen pickup. Possible mechanisms for oxygen pickup in the powder during SLM, such as adsorption and breakdown of water, oxygen solubility, spatter re-introduction, and solid-state oxide growth, are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Z. Sun, X. Tan, S. Tor, W. Yong: JMADE, 2016, vol. 104, pp. 197-204
2. B. Almangour, D. Grzesiak, T. Borkar, J. Yang: Materials & Design, 2018, vol. 138, pp. 119-128.10.1016/j.matdes.2017.10.039 ↗
3. I. Yadroitsev, P. Krakhmalev, I. Yadroitsava, S. Johansson, I. Smurov: Journal of Materials Processing Tech., 2013, vol. 213, pp. 606-613.10.1016/j.jmatprotec.2012.11.014 ↗
4. H. P. Tang, M. Qian, N. Liu, X. Z. Zhang, G. Y. Yang, and J. Wang: JOM, 2015, vol. 67, pp. 555–63.10.1007/s11837-015-1300-4 ↗
5. P. Nandwana, W. H. Peter, R. R. Dehoff, L. E. Lowe, M. M. Kirka, F. Medina, and S. S. Babu: Metall. Mater. Trans. B, 2015, vol. 47, pp. 754–62.
6. Y. Liu, Y. Yang, S. Mai, D. Wang, and C. Song: Mater. Des., 2015, vol. 87, pp. 797–806.10.1016/j.matdes.2015.08.086 ↗
7. Renishaw plc: White Paper, Renishaw, Staffordshire, 2016.
8. DoITPoMS, The Ellingham Diagram. (University of Cambridge, 2018), https://www.doitpoms.ac.uk/tlplib/ellingham_diagrams/ellingham.php. Acessed 01 Jan 2016
9. N. Birks, G. H. Meier, and F. S. Pettit: Introduction to the High-Temperature Oxidation of Metals, 2nd ed. New York: Cambridge university press, 2006.10.1017/CBO9781139163903 ↗
10. E. Fromm: Kinetics of Metal-Gas Interactions at Low Temperatures. Springer, Berlin, 1998.10.1007/978-3-642-60311-2 ↗
11. R. Guillamet, J. Lopitauz, B. Hannoyer, and M. Lenglet: Le J. Phys., 1993, vol. 3, pp. 349–56.
12. K. A. Habib, M. S. Damra, J. J. Saura, I. Cervera, and J. Bellés: Int. J. Corros., 2011 vol. 2011, pp. 1-10.10.1155/2011/824676 ↗
13. M. F. McGuire: Stainless Steels for Design Engineers, ASM International, Ohio, 2008, pp. 57–68.10.31399/asm.tb.ssde.t52310057 ↗
14. J. Tarabay, V. Peres, and M. Pijolat. 2013, vol 80, pp. 311-22. https://doi.org/10.1007/s11085-013-9387-x10.1007/s11085-013-9387-x ↗
15. T. Debroy and S. A. David: Reviews of Modern Physics, 1995, vol. 67, pp. 85-112.10.1103/RevModPhys.67.85 ↗
16. T. Hibiya and S. Ozawa: Cryst. Res. Technol., 2013, vol. 48, pp. 208–13.10.1002/crat.201200514 ↗
17. E. Louvis, P. Fox, and C. J. Sutcliffe: J. Mater. Process. Technol., 2011, vol. 2311, pp. 275–84.10.1016/j.jmatprotec.2010.09.019 ↗
18. Bruker AXS GmbH, D2 Phaser 2nd Generation, https://www.bruker.com/fileadmin/user_upload/8-PDF-Docs/X-rayDiffraction_ElementalAnalysis/XRD/Brochures/D2_PHASER_2ndGen_Brochure_DOC-B88-EXS017-V2_web.pdf. Accessed 13 Sept 2015
19. Bruker AXS GmbH, Spec Sheet XRD 27 LYNXEYE-Super Speed Detector for X-ray Powder Diffraction. https://www.bruker.com/fileadmin/user_upload/8-PDF-Docs/X-rayDiffraction_ElementalAnalysis/XRD/ProductSheets/LYNXEYE_DOC-S88-EXS027_V4_high.pdf. Accessed 13 Sept 2015
20. ASTM E1019: ASTM Int., 2003, vol. 03, pp. 1–28.
21. C. Oikonomou, D. Nikas, E. Hryha, and L. Nyborg: Surf. Interface Anal., 2014, vol. 46, pp. 1028–32.10.1002/sia.5439 ↗
22. B. Almangour, D. Grzesiak, J. Cheng, Y. Ertas: Journal of Materials Processing Tech., 2018, vol. 257, pp. 288-301.10.1016/j.jmatprotec.2018.01.028 ↗
23. D. Rosenthal: Trans. Am. Soc. Mech. Eng., 1946, vol. 68, pp. 849–66.
24. R. L. Tapping, R. D. Davidson, and T. E. Jackman: Surf. Interface Anal., 1985, vol. 7, pp. 105–8.10.1002/sia.740070209 ↗
25. P. Bidare, I. Bitharas, R.M. Ward, M.M. Attallah, A.J. Moore: Acta Materialia, 2018, vol. 142, pp. 107-120.10.1016/j.actamat.2017.09.051 ↗
26. O. Kubaschewski: IRON - Binary Phase Diagrams, 1st ed., Springer-Verlag Berlin Heidelberg GmbH, Berlin, 1982, pp. 79–82.
27. C. D. Boley, S. A. Khairallah, and A. M. Rubenchik: Appl. Opt., 2015, vol. 54, pp. 2477–82.10.1364/AO.54.002477 ↗
28. M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa, R. Tanaka, and M. S. Abdul Aziz: Key Eng. Mater., 2012, vol. 523–524, pp. 244–24910.4028/www.scientific.net/KEM.523-524.244 ↗