High Strength and High Electrical Conductivity Cu-Ti Alloy Wires Fabricated by Aging and Severe Drawing
Source abstract
Abstract
We designed an optimal procedure to prepare Cu-Ti alloy wires with an excellent combination of strength and electrical conductivity, by drawing conventional peak-aged alloys as well as over-aged ones. When drawing the peak-aged alloy, which exhibited the maximum hardness after aging and a low electrical conductivity, the strength of the wires increased rapidly in the initial stage of drawing but then saturated on further drawing. On the contrary, when drawing the over-aged alloy of inferior hardness but superior electrical conductivity, the strength increased steadily through drawing and eventually exceeded the value of the wires drawn from the peak-aged alloy. Also, the electrical conductivity of the wires drawn from the over-aged alloy was always much greater than that from the peak-aged alloy. Thus, we demonstrated that the procedure of over-aging and then drawing severely is able to enhance both the strength and the electrical conductivity for the Cu-Ti alloys, rather than the conventional peak-aging and drawing process. Noted that the performance of the wires drawn from the over-aged alloy is comparable with that of commercial Cu-Be wires, which are considered to possess the combination of greatest strength and conductivity in Cu-based alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A. Datta and W.A. Soffa: Acta Metall., 1976, vol. 24, pp. 987-1001.10.1016/0001-6160(76)90129-2 ↗
2. S. Nagarjuna, M. Srinivas, K. Balasubramanian, and D. S. Sarma: Acta Metall., 1996, vol. 44, pp. 2285-2293.
3. W.A. Soffa and D. E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 347-366.10.1016/S0079-6425(03)00029-X ↗
4. A.A. Hameda and L. Blaz: Mater. Sci. Eng. A, 1998, vol. 254, pp. 83–89.10.1016/S0921-5093(98)00753-9 ↗
5. C. Borchers: Philos. Mag. A., 1999, vol. 79, pp.537-547.10.1080/01418619908210315 ↗
6. R. Markandeya, S. Nagarjuna, and D.S. Sarma: Mater. Sci. Eng. A, 2004, vol. 404, pp. 305–313.10.1016/j.msea.2005.05.072 ↗
7. S. Nagarjuna and D.S. Sarma: J. Mater. Sci., 2002, vol. 37, pp. 1929-1940.10.1023/A:1015278610543 ↗
8. D. Bozic, J. Stasic, J. Ruzic, M. Vilotijevic, and V. Rajkovic: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8139-8144.10.1016/j.msea.2011.07.061 ↗
9. S. Semboshi, T. Nishida, and H. Numakura: Mater. Sci. Eng. A, 2009, vol. 517, pp. 105-113.10.1016/j.msea.2009.03.047 ↗
10. S. Semboshi, T. Nishida, H. Numakura, T. Al-Kassab, and R. Kirchheim: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2136-2143.10.1007/s11661-011-0637-8 ↗
11. M. Sobhani, A. Mirhabibi, H. Arabi, and R.M.D. Brydson: Mater. Sci. Eng. A, 2013, vol. 577, pp. 16–22.10.1016/j.msea.2013.03.063 ↗
12. L. Si, L. Zhou, X. Zhu, L. Sanhua, S. Leinuo, and D. Qiyi: Mater. Sci. Eng. A, 2016, vol. 650, pp. 345-353.10.1016/j.msea.2015.10.062 ↗
13. D.E. Laughlin and J.W. Cahn: Acta Metall., 1975, vol. 23, pp. 329-339.10.1016/0001-6160(75)90125-X ↗
14. J.A. Cornie, A. Datta, and W.A. Soffa: Metal. Trans., 1973, vol. 4, pp. 727-733.10.1007/BF02643081 ↗
15. L.A. Nesbit and D.E. Laughlin: Acta Metall., 1978, vol. 26, pp. 815-825.10.1016/0001-6160(78)90031-7 ↗
16. W.A. Soffa and D.E. Laughlin: Acta Metall., 1989, vol. 37, pp. 3019-3028.10.1016/0001-6160(89)90338-6 ↗
17. T.J. Konno, R. Nishio, S. Semboshi, T. Ohsuna, and E. Okunishi: J. Mater. Sci., 2008, vol. 43, pp. 3761-3768.10.1007/s10853-007-2233-2 ↗
18. S. Semboshi, S. Sato, M. Ishikuro, K. Wagatsuma, A. Iwase, and T. Takasugi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3401-3411.10.1007/s11661-014-2293-2 ↗
19. S. Semboshi, S. Amano, J. Fu, A. Iwase, and T. Takasugi: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1501-1511.10.1007/s11661-016-3949-x ↗
20. S. Semboshi and T.J. Konno: J. Mater. Res., 2008, vol. 23, pp. 473-477.10.1557/JMR.2008.0050 ↗
21. J.Y. Brun, S.J. Hamar-Thibault, and C.H. Allibert: Z. Metallk., 1983, vol. 74, pp. 525-529.
22. A.M. Elwazri, P. Wanjara, and S. Yue: Mater. Sci. Eng. A, 2005, vol. 404, pp. 91-98.10.1016/j.msea.2005.05.051 ↗
23. S.W. Joung, U.G. Kang, S.P. Hong, Y.W. Kim, and W.J. Nam: Mater. Sci. Eng. A, 2013, vol. 586, pp. 171-177.10.1016/j.msea.2013.07.095 ↗
24. Y. Li, D. Raabe, M. Herbig, P.P. Choi, S. Goto, A. Kostka, H. Yarita, C. Borchers, and R. Kirchheim: Phys. Rev. Lett., 2014, vol. 113, pp. 106104.10.1103/PhysRevLett.113.106104 ↗
25. C. Borchers, and R. Kirchheim: Prog. Mater.Sci., 2016, vol. 82, pp. 405-444.10.1016/j.pmatsci.2016.06.001 ↗
26. Y. Sakai and H.-J. Schneider-Muntau: Acta Mater., 1997, vol. 45, pp. 1017-1023.10.1016/S1359-6454(96)00248-0 ↗
27. Y.Z. Tian, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao, and T.G. Langdon: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4331-4336.10.1016/j.msea.2011.01.057 ↗
28. C. Biselli and D.C. Morris: Acta Mater., 1996, vol. 44, pp. 493-504.10.1016/1359-6454(95)00212-X ↗
29. Q. Feng, L. Song, Y. Zeng, Y. Fang, L. Meng, J. Liu, and H. Wang: J. Alloys Compd., 2015, vol. 640, pp. 45-50.10.1016/j.jallcom.2015.03.226 ↗
30. W.A. Spitzig, H.L. Downing, F.C. Laabs, E.D. Gibson, and J.D. Verhoeven: Metall. Trans. A, 1993, vol. 24A, pp. 7-14.10.1007/BF02669596 ↗
31. S. Semboshi: Estimation of strength and hardness of the stable β-Cu4Ti intermetallic compound (2018), http://www.crdam.imr.tohoku.ac.jp/Supplementary_Material-180626.pdf. Accessed 26 June 2018.
32. S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, and T. Takasugi: Mater. Charact., 2013, vol. 82, pp. 23-31.10.1016/j.matchar.2013.04.016 ↗
33. J. Miyake and M.E. Fine: Acta Metall., 1992, vol. 40, pp. 733-41.10.1016/0956-7151(92)90015-7 ↗
34. S. Suzuki, K. Hirabayashi, H. Shibata, K. Mimura, M. Isshiki, and Y. Waseda: Scr. Mater., 2003, vol. 48, pp. 431-5.10.1016/S1359-6462(02)00441-4 ↗
35. R. Landauer: J. Appl. Phys., 1952, vol. 23, pp. 779-784.10.1063/1.1702301 ↗
36. S. Semboshi, M. Ishikuro, A. Iwase, and T. Takasugi: Mater. Trans., 2018, vol. 59, pp. 182-187.10.2320/matertrans.MC201706 ↗
37. H. Tsubakino: Metallography, 1984, vol. 17, pp. 371-382.10.1016/0026-0800(84)90074-0 ↗
38. Z.J. Wang and T.J. Konno: Philos. Mag., 2013, vol. 93, pp. 949-974.10.1080/14786435.2012.738940 ↗
39. W. Kim, G. Meyrick, and P.G. Shewmon: Scripta Metall., 1983, vol. 17, pp. 1435-1440.10.1016/0036-9748(83)90371-X ↗
40. E. Hornbogen: Metall. Trans., 1972, vol. 3, pp. 2717-2727.10.1007/BF02652839 ↗