journal article·2018-09

Two Steady-State Creep Stages in Co-Al-W-Base Single-Crystal Superalloys at 1273 K/137 MPa

Song Lu, Stoichko Antonov, Longfei Li, Qiang Feng

Publisher page

Abstract

With the aim of understanding how to further improve the creep resistance of Co-Al-W-base superalloys at higher temperature (> 1223 K), the creep behavior of a novel Co-Al-W-base single-crystal superalloy at 1273 K/137 MPa was systematically investigated. Several interrupted creep tests were performed and the main deformation mechanisms of characteristic creep stages were identified and correlated to both the γ/γ′ microstructural and dislocation substructural evolutions. Two steady-state creep stages were observed during the creep process. The interfacial dislocations and the formation of rafts were responsible for the first steady-state creep stage, while the second steady-state creep stage could be ascribed to interactions between stacking faults of different slip systems in an inverted γ/γ′ microstructure, e.g., the formation of Lomer–Cottrell locks by the leading partials of the SFs. The observed creep mechanisms were compared to those typical of Ni-base superalloys at similar creep conditions. It is suggested that a high stacking fault energy of the γ′ phase and a higher γ′ volume fraction may be favorable for creep resistance of Co-Al-W-base single-crystal superalloys by promoting the double steady-state creep phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. R.C. Reed: The Superalloys Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. A. Suzuki, H. Inui, T.M. Pollock: Annu. Rev. Mater. Res., 2015, vol. 45, pp. 345-68.10.1146/annurev-matsci-070214-021043 ↗
3. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, K. Ishida: Sci., 2006, vol. 312, pp. 90-91.10.1126/science.1121738 ↗
4. T.M. Pollock, R.D. Field: Dislocations in Solids, Elsevier, Amsterdam, 2002, pp. 547-1810.1016/S1572-4859(02)80014-6 ↗
5. F. Xue, H.J. Zhou, X.H. Chen, Q.Y. Shi, H. Chang, M.L. Wang, X.F. Ding, Q. Feng: Eurosuperalloys 2014, EDP Sciences, vol. 14, pp. 15002.10.1051/matecconf/20141415002 ↗
6. M.S. Titus, A. Suzuki, T.M. Pollock: Superalloys 2012, TMS, 2012, pp. 823–32.10.1002/9781118516430.ch91 ↗
7. F. Xue, H.J. Zhou, Q. Feng: JOM, 2014, vol. 66, pp. 2486-94.10.1007/s11837-014-1181-y ↗
8. H.J. Zhou, H. Chang, Q. Feng: Scri. Mater., 2017, vol. 135, pp. 84-87.10.1016/j.scriptamat.2017.03.031 ↗
9. F. Xue, H.J. Zhou, Q.Y. Shi, X.H. Chen, H. Chang, M.L. Wang, Q. Feng: Scri. Mater., 2015, vol. 97, pp. 37-40.10.1016/j.scriptamat.2014.10.015 ↗
10. F. Xue, C.H. Zenk, L.P. Freund, M. Hoelzel, S. Neumeier, M. Göken: Scri. Mater., 2018, vol. 142, pp. 129-32.10.1016/j.scriptamat.2017.08.039 ↗
11. M.S. Titus, Y.M. Eggeler, A. Suzuki, T.M. Pollock: Acta Mater., 2015, vol. 82, pp. 530-39.10.1016/j.actamat.2014.08.033 ↗
12. C.M.F. Rae, R.C. Reed: Acta Mater., 2007, vol. 55, pp. 1067-81.10.1016/j.actamat.2006.09.026 ↗
13. X. Wu, P. Wollgramm, C. Somsen, A. Dlouhy, A. Kostka, G. Eggeler: Acta Mater., 2016, vol. 112, pp. 242-60.10.1016/j.actamat.2016.04.012 ↗
14. H. Mughrabi, W. Schneider, V. Sass, C. Lang: Strength Mater., 1994, pp. 705–08.
15. W. Schneider, H. Mughrabi: Proc, 5th Int. Conf. Creep Fract. Eng. Mater. Struct. Institute of Metals, 1993, pp. 209–20.
16. J.X. Zhang, J. Wang, H. Harada, Y. Koizumi: Acta Mater., 2005, vol. 53, pp. 4623-33.10.1016/j.actamat.2005.06.013 ↗
17. H. Mughrabi: Mater. Sci. Technol., 2013, vol. 25, pp. 191-04.10.1179/174328408X361436 ↗
18. K. Tanaka, M. Ooshima, N. Tsuno, A. Sato, H. Inui: Philos. Mag. A, 2012, vol. 92, pp. 4011-27.10.1080/14786435.2012.700416 ↗
19. F. Xue, H.J. Zhou, X.F. Ding, M.L. Wang, Q. Feng: Mater. Lett., 2013, vol. 112, pp. 215-18.10.1016/j.matlet.2013.09.023 ↗
20. T.M. Pollock, A.S. Argon: Acta Metall., 1994, vol. 42, pp. 1859-74.10.1016/0956-7151(94)90011-6 ↗
21. R.A. Hobbs, G.J. Brewster, C.M.F. Rae, S. Tin: Superalloys 2008, TMS, 2008, pp. 171–80.10.7449/2008/Superalloys_2008_171_180 ↗
22. P. Caron, C. Ramusat, F. Diologent: SuperaIloys 2008, TMS, 2008, pp. 159–67.
23. A. Epishin, T. Link, U. Bruckner, P.D. Portella: Acta Mater., 2001, vol. 49, pp. 4017-23.10.1016/S1359-6454(01)00290-7 ↗
24. L. Shi, J.J. Yu, C.Y. Cui, X.F. Sun: Mater. Sci. Eng. A, 2015, vol. 635, pp. 50-58.10.1016/j.msea.2015.03.063 ↗
25. A. Fredholm, J.L. Strudel: Proc. 5th Int. Symp. Superalloys, TMS, 1993, pp. 211–20.
26. N. Matan, D.C. Cox, C.M.F. Rae, R.C. Reed: Acta Mater., 1999, vol. 47, pp. 2031-45.10.1016/S1359-6454(99)00093-2 ↗
27. P. Kontis, Z. Li, D.M. Collins, J. Cormier, D. Raabe, B. Gault: Scri. Mater., 2018, vol. 145, pp. 76-80.10.1016/j.scriptamat.2017.10.005 ↗
28. J. Coakley, D. Ma, M. Frost, D. Dye, D.N. Seidman, D.C. Dunand, H.J. Stone: Acta Mater., 2017, vol. 135, pp. 77-87.10.1016/j.actamat.2017.06.021 ↗
29. J. Svoboda, P. Lukáš: Acta Mater., 1998, vol. 46, pp. 3421-31.10.1016/S1359-6454(98)00043-3 ↗
30. T.M. Pollock, A.S. Argon: Acta Metall., 1992, vol. 40, pp. 1-30.10.1016/0956-7151(92)90195-K ↗
31. R.C. Reed, N. Matan, D.C. Cox, M.A. Rist, C.M.F. Rae: Acta Mater., 1999, vol. 47, pp. 3367-81.10.1016/S1359-6454(99)00217-7 ↗
32. T.P. Gabb, S.L. Draper, D.R. Hull, R.A. Mackay, M.V. Nathal: Mater. Sci. Eng. A, 1989, vol. 118, pp. 59-69.10.1016/0921-5093(89)90058-0 ↗
33. M.V. Nathal, R.A. Mackay, R.V. Miner: Metall. Mater. Trans. A, 1989, vol. 20, pp. 133-41.10.1007/BF02647500 ↗
34. L.J. Carroll, Q. Feng, T.M. Pollock: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1290-07.10.1007/s11661-008-9520-7 ↗
35. C.M.F. Rae, N. Matan, R.C. Reed: Mater. Sci. Eng. A, 2001, vol. 300, pp. 125-34.10.1016/S0921-5093(00)01788-3 ↗
36. Y.Q. Sun, P.M. Hazzledine, M.A. Crimp, A. Couret: Philos. Mag. A, 1991, vol. 64, pp. 311-31.10.1080/01418619108221188 ↗
37. J.P. Hirth, J. Lothe: Theory of dislocations, Krieger, Malabar, 1982.
38. H. Rouault-Rogez, M. Dupeux, M. Ignat: Acta Metall., 1994, vol. 42, pp. 3137-48.10.1016/0956-7151(94)90411-1 ↗
39. J. Li, R.P. Wahi: Acta Metall., 1995, vol. 43, pp. 507-17.10.1016/0956-7151(94)00252-D ↗
40. A. Mottura, A. Janotti, T.M. Pollock: Inter., 2012, vol. 28, pp. 138-43.
41. A. Mottura, A. Janotti, T.M. Pollock: Superalloys 2012, TMS, 2012, pp. 685–93.10.7449/2012/Superalloys_2012_685_693 ↗
42. T. Murakumo, T. Kobayashi, Y. Koizumi, H. Harada: Acta Mater., 2004, vol. 52, pp. 3737-44.10.1016/j.actamat.2004.04.028 ↗