Microstructure and Texture Development during Cold Rolling in UNS S32205 and UNS S32760 Duplex Stainless Steels
Source abstract
Abstract
In the present study, microstructure and texture evolution during cold rolling in UNS S32205 and UNS S32760 duplex stainless steel was investigated. Both steels were unidirectionally cold rolled up to 80 pct thickness reduction. Scanning electron microscopy and electron backscattered diffraction (EBSD) were used for microstructural characterization, while X-ray diffraction (XRD) was used for the measurement of bulk texture. Strain-induced martensite (SIM) was identified and quantified with the help of magnetic measurements (B-H curve and magnetization saturation). With the increase in plastic strain, the grains became morphologically elongated along the rolling direction with the reduction in average band thickness and band spacing. SIM increased with the increase in deformation and was found to be a function of strain and the SFE of austenite. The increase in SIM was much more pronounced in UNS S32205 steel as compared to UNS S32760 steel. After cold rolling, strong alpha-fiber (RD//aOE (c) 110 >) texture was developed in ferrite, while brass texture was dominant in austenite for both steels. The strength of texture components and fibers was stronger in UNS S32760 steel. Another significant feature was the development of weak gamma-fiber (ND//aOE (c) 111 >) in UNS S32760 steel at intermediate deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. R. Gunn: Duplex Stainless Steels, Abington Publishing, Cambridge, England, 1997.10.1533/9781845698775 ↗
2. T.H. Chen and J.R. Yang: Mater. Sci. Eng. A, 2001, vol. 311, pp. 28–41.10.1016/S0921-5093(01)00911-X ↗
3. D.M. Escriba, E. Materna-Morris, R.L. Plaut, and A.F. Padilha: Mater. Charact., 2009, vol. 60, pp. 1214–19.10.1016/j.matchar.2009.04.013 ↗
4. A. Kashiwar, N.P. Vennela, S.L. Kamath, and R.K. Khatirkar: Mater. Charact., 2012, vol. 74, pp. 55–63.10.1016/j.matchar.2012.09.008 ↗
5. K. Datta, R. Delhez, P.M. Bronsveld, J. Beyer, H.J.M. Geijselaers, and J. Post: Acta Mater., 2009, vol. 57, pp. 3321–26.10.1016/j.actamat.2009.03.039 ↗
6. M. Humbert, B. Petit, B. Bolle, and N. Gey: Mater. Sci. Eng. A, 2007, vols. 454–455, pp. 508–17.10.1016/j.msea.2006.11.112 ↗
7. K. Spencer: The Work Hardening of Austenitic Stainless Steel, Applied to the Fabrication of High-Strength Conductors, McMaster University, Hamilton, ON, Canada, 2004.
8. J. Talonen: Effect of Strain-Induced α′-Martensite Transformation on Mechanical Properties of Metastable Austenitic Stainless Steels, Helsinki University of Technology, Espoo, Finland, 2007.
9. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
10. P. Bassani and M. Breda: Microscopy, 2013, vol. 9, pp. 988–95.
11. J. Talonen, P. Aspegren, and H. Hänninen: Mater. Sci. Technol., 2004, vol. 20, pp. 1506–12.10.1179/026708304X4367 ↗
12. S.S.M. Tavares, M.R. da Silva, J.M. Pardal, H.F.G. Abreu, and A.M. Gomes: J. Mater. Process. Technol., 2006, vol. 180, pp. 318–22.10.1016/j.jmatprotec.2006.07.008 ↗
13. S. Pramanik, S. Bera, and S.K. Ghosh: Steel Res. Int., 2014, vol. 85, pp. 776–83.10.1002/srin.201300293 ↗
14. B.D. Cullity: Elements of X-ray Diffraction, Addison-Wesley Publishing Company Inc., Boston, MA, 1978.
15. C. Herrera, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 4653–64.10.1016/j.actamat.2011.04.011 ↗
16. A. Belyakov, Y. Kimura, and K. Tsuzaki: Acta Mater., 2006, vol. 54, pp. 2521–32.10.1016/j.actamat.2006.01.035 ↗
17. M. Breda, K. Brunelli, F. Grazzi, A. Scherillo, and I. Calliari: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 577–86.10.1007/s11661-014-2646-x ↗
18. R. Badji, B. Bacroix, and M. Bouabdallah: Mater. Charact., 2011, vol. 62, pp. 833–43.10.1016/j.matchar.2011.06.001 ↗
19. J.D. Kordatos, G. Fourlaris, and G. Papadimitriou: Scripta Mater., 2001, vol. 44, pp. 401–08.10.1016/S1359-6462(00)00613-8 ↗
20. C.M. Souza, H.F.G. Abreu, S.S.M. Tavares, and J.M. Rebello: Mater. Charact., 2008, vol. 59, pp. 1301–06.10.1016/j.matchar.2007.11.005 ↗
21. J. Hamada and N. Ono: Mater. Trans., 2010, vol. 51, pp. 635–43.10.2320/matertrans.MG200907 ↗
22. J. Ryś and A. Zielińska-Lipiec: Arch. Metall. Mater., 2012, vol. 57, pp. 1041–53.10.2478/v10172-012-0116-2 ↗
23. J. Keichel, J. Foct, and G. Gottstein: ISIJ Int., 2003, vol. 43, pp. 1788–94.10.2355/isijinternational.43.1788 ↗
24. R. Garg, S. Ranganathan, and S. Suwas: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4582–92.10.1016/j.msea.2010.04.012 ↗
25. C. Donadille, R. Valle, P. Dervin, and R. Penelle: Acta Metall., 1989, vol. 37, pp. 1547–71.10.1016/0001-6160(89)90123-5 ↗
26. P.P. Bhattacharjee, M. Zaid, G.D. Sathiaraj, and B. Bhadak: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2180–91.10.1007/s11661-013-2139-3 ↗
27. M. Zaid and P.P. Bhattacharjee: ISIJ Int., 2014, vol. 54, pp. 2844–53.10.2355/isijinternational.54.2844 ↗
28. A. Belyakov, R. Kaibyshev, Y. Kimura, and K. Tsuzaki: Mater. Sci. Forum, 2010, vol. 638–642, pp. 1905–10.10.4028/www.scientific.net/MSF.638-642.1905 ↗
29. M.K. Blicharski, J. Jura, T. Baudin, and J. Bonarski: Arch. Metall. Mater., 2005, vol. 50, pp. 495-502.
30. ASM Handbook: Metallography and Microstructures, ASM INTERNATIONAL, Materials Park, OH, 2004.
31. OIM: Analysis Version 7.2. User Manual, TexSEM Laboratories Inc., Draper, 2013.
32. S.I. Wright, M.M. Nowell, and D.P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316–29.10.1017/S1431927611000055 ↗
33. A.J. Schwartz, M. Kumar, A.L. Adams, and D.P. Field: Electron Backscatter Diffraction in Materials Science, Kluwer Academic/Plenum Publishers, Springer, New York, NY, 2000.10.1007/978-1-4757-3205-4 ↗
34. P. Van Houtte: The “MTM-FHM” Software System Version 2 (2009).
35. H.J. Bunge: Texture Analysis in Materials Science, Butterworth & Co., London, 1982.
36. S.S.M. Tavares, P.D.S. Pedrosa, J.R. Teodósio, M.R. Da Silva, J.M. Neto, and S. Pairis: J. Alloys Compd., 2003, vol. 351, pp. 283–88.10.1016/S0925-8388(02)01076-9 ↗
37. S.S.M. Tavares, J.M. Pardal, J.A. de Souza, J.M. Neto, and M.R. da Silva: J. Alloys Compd., 2006, vol. 416, pp. 179–82.10.1016/j.jallcom.2005.09.006 ↗
38. W. Solano-Alvarez, H.F.G. Abreu, M.R. Da Silva, and M.J. Peet: J. Magn. Magn. Mater., 2015, vol. 378, pp. 200–05.10.1016/j.jmmm.2014.11.037 ↗
39. R.P. Reed and R.E. Schramm: J. Appl. Phys., 1974, vol. 45, pp. 4705–11.10.1063/1.1663122 ↗
40. R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–51.
41. K. Kapoor, D. Lahiri, I.S. Batra, S.V.R. Rao, and T. Sanyal: Mater. Charact., 2005, vol. 54, pp. 131–40.10.1016/j.matchar.2004.09.009 ↗
42. B.E. Warren: Progr. Met. Phys., 1959, vol. 8, pp. 147–202.10.1016/0502-8205(59)90015-2 ↗
43. Y.H. Dong and P. Scardi: J. Appl. Cryst., 2000, vol. 33, pp. 184–89.10.1107/S002188989901434X ↗
44. FERITSCOPE® FMP30 Measurement of the Ferrite Content in Austenitic and Duplex Steel, Fischer (2014).
45. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, United Kingdom, 2015.
46. R.K. Ray and Satyam Suwas: Crystallographic Texture of Materials, Springer, Manchester, United Kingdom, 2014.
47. W. Reick, M. Pohl, and A.F. Padilha: Steel Res., 1996, vol. 67, pp. 253–56.10.1002/srin.199605486 ↗
48. L.C.M. Gilapa: J. Achiev. Mater. Manuf. Eng., 2012, vol. 55, pp. 679–84.
49. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1982, vol. 13A, pp. 627–35.10.1007/BF02644428 ↗
50. B. Verlinden, J. Driver, I. Samajdar, and R. Doherty: Thermo-Mechanical Processing of Metallic Materials, Elsevier, New York, NY, 2007.
51. R. Khatirkar, B. Vadavadagi, S.K. Shekhawat, and A. Haldar: ISIJ Int., 2012, vol. 52, pp. 884–93.10.2355/isijinternational.52.884 ↗
52. C.U. Jeong, W. Woo, J.Y. Choi, and S. Choi: Acta Mater., 2014, vol. 67, pp. 21–31.10.1016/j.actamat.2013.12.020 ↗
53. N.P. Gurao and S. Suwas: Sci. Rep., 2014, vol. 4, pp. 01–08.10.1038/srep05641 ↗
54. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2738–46.10.1016/j.msea.2010.01.004 ↗
55. L. Saraf: Microsc. Microanal., 2014, vol. 17, pp. 424–25.10.1017/S1431927611002996 ↗
56. H. Li, E. Hsu, J. Szpunar, H. Utsunomiya, and T. Sakai: J. Mater. Sci., 2008, vol. 43, pp. 7148–56.10.1007/s10853-008-3021-3 ↗
57. P.J. Rajasekhara, S. Ferreira, L.P.K. Karjalainen, in 6th European Stainless Steel Conference Proceedings, 2008, pp. 511–17.
58. T.S. Chern, K.H. Tseng, and H.L. Tsai: Mater. Des., 2011, vol. 32, pp. 255–63.10.1016/j.matdes.2010.05.056 ↗
59. J. Niagaj and Ł. Mazur: Arch. Metall. Mater., 2012, vol. 57, pp. 16–18.
60. B.D. Cullity and C.D. Graham: Introduction to Magnetic Materials, Wiley Publication, Hoboken, NJ, 2009.
61. C.G. Rhodes and A.W. Thompson: Metall. Trans. A, 1977, vol. 8A, pp. 1901–06.10.1007/BF02646563 ↗
62. N.P. Gurao and Satyam Suwas: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 809–27.10.1007/s11661-016-3856-1 ↗
63. X. Liu, X.P. Ding, Y.L. He, L. Li, H.M. Song, and J.C. Hu: J. Iron Steel Res. Int., 2010, vol. 17, pp. 45–49.10.1016/S1006-706X(10)60127-6 ↗
64. I. Samajdar, P. Ratchev, B. Verlinden, and E. Aernoudt: Acta Mater., 2001, vol. 49, pp. 1759–69.10.1016/S1359-6454(01)00083-0 ↗
65. T. Leffers and R.K. Ray: Progr. Mater. Sci., 2009, vol. 54, pp. 351–96.