Effects of Microstructure on CVN Impact Toughness in Thermomechanically Processed High Strength Microalloyed Steel
Source abstract
Abstract
Investigation on the correlation between microstructure and CVN impact toughness is of practical importance for the microstructure design of high strength microalloyed steels. In this work, three steels with characteristic microstructures were produced by cooling path control, i.e., steel A with granular bainite (GB), steel B with polygonal ferrite (PF) and martensite-austenite (M-A) constituent, and steel C with the mixture of bainitic ferrite (BF), acicular ferrite (AF), and M-A constituent. Under the same alloy composition and controlled rolling, similar ductile-to-brittle transition temperatures were obtained for the three steels. Steel A achieved the highest upper shelf energy (USE), while large variation of impact absorbed energy has been observed in the ductile-to-brittle transition region. With apparently large-sized PF and M-A constituent, steel B shows the lowest USE and delamination phenomenon in the ductile-to-brittle transition region. Steel C exhibits an extended upper shelf region, intermediate USE, and the fastest decrease of impact absorbed energy in the ductile-to-brittle transition region. The detailed CVN impact behavior is studied and then linked to the microstructural features.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. R. Song, D, Ponge and D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881-4892.10.1016/j.actamat.2005.07.009 ↗
2. M. Calcagnotto, D. Ponge and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7832-7840.10.1016/j.msea.2010.08.062 ↗
3. L.Y. Lan, C.L Qiu, D.W. Zhao, X.H. Gao and L.X. Du: Mater. Sci. Eng. A, 2011, vol. 529, pp.192-200.10.1016/j.msea.2011.09.017 ↗
4. S. Chatterjee and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 645-649.10.1179/174328406X86182 ↗
5. F.G. Caballero, H. Roelofs, St. Hasler, C. Capdevila, J. Cornide and C. Garcia-Mateo: Mater. Sci. Technol., 2012, vol. 28, 1, pp. 95-102.10.1179/1743284710Y.0000000047 ↗
6. G.J. Baczynski, J.J. Jonas, L.E. Collins: Metall. Mater. Trans. A, 1999, vol. 30, pp. 3045-3054.10.1007/s11661-999-0215-5 ↗
7. X.L. Yang, Y.B. Xu, X.D. Tan and D. Wu: Mater. Sci. Eng. A, 2014, vol. 607, pp. 53-62.10.1016/j.msea.2014.03.121 ↗
8. X.L. Yang, Y.B. Xu, X.D. Tan and D. Wu: Mater. Sci. Eng. A, 2015, vol. 641, pp. 96-106.10.1016/j.msea.2015.06.029 ↗
9. B. Hwang, C.G. Lee and T. Lee: Metall. Mater. Trans. A, 2010, vol. 85, pp. 85-96.10.1007/s11661-009-0070-4 ↗
10. H.K. Sung, S.Y. Shin, B. Hwang, C.G. Lee, N.J. Kim and S. Lee: Metall. Mater. Trans. A, 2011, vol. 42, pp. 1827-1835.10.1007/s11661-010-0590-y ↗
11. Y.M. Kim, S.Y. Shin, H. Lee, B. Hwang, S. Lee and N.J. Kim: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1731-1742.10.1007/s11661-007-9197-3 ↗
12. B.X. Wang, Z.D. Wang and G.D. Wang: Proc. Iron Steel Technol., Association for Iron and Steel Technology, Indianapolis. 2014, vol. 3. pp. 3073–80.
13. Materials Algorithms Project (MAP) University of Cambridge, Cambridge. 2015. http://www.msm.cam.ac.uk/map/.
14. I. Gutiérrez: Mater. Sci. Eng. A, 2013, vol.571, pp. 57-67.10.1016/j.msea.2013.02.006 ↗
15. N. Isasti, D. Jorge-Badiola, M. Taheri and P. Uranga: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4972-4982.10.1007/s11661-014-2451-6 ↗
16. A.J.E. Foreman and M.J. Makin: Can. J. Phys., 1967, vol. 45, pp. 511-517.10.1139/p67-044 ↗
17. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publisher, London, 1978.
18. J.F. Lu, O. Omotoso, J.B. Wiskel, D.G. Ivey and H. Henein: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3043-3061.10.1007/s11661-012-1135-3 ↗
19. B. Mintz, W.B. Morrison, A. Jones: Met. Technol., 1979, vol. 6, pp. 252-260.10.1179/030716979803276246 ↗
20. K.J. Irvine, F.B. Pickering and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, pp. 161.
21. G. Puppala, A. Moitra, S. Sathyanarayanan, R. Kaul, G. Sasikala, R. C. Prasad and L. M. Kukreja: Mater. and Design, 2014, vol. 59, pp. 509-515.10.1016/j.matdes.2014.03.013 ↗
22. R.K. Nanstad, M.A. Sokolov: Symposium on Pendulum Impact Machine: Procedures and Specimens for Verification, Montreal, 1994, Report No. CONF-9405223-2.
23. I.A. Yakubtsov, P. Poruks and J.D. Boyd: Mater. Sci. Eng. A, 2008, vol. 480, pp. 109-116.10.1016/j.msea.2007.06.069 ↗
24. Y.L. Zhou, T. Jia, X.J. Zhang, Z.Y. Liu and R.D.K. Misra: Mater. Sci. Eng. A, 2015, vol. 626, pp. 352-361.10.1016/j.msea.2014.12.074 ↗
25. S. Lee, S. Kim, B. Hwang, B.S. Lee and C.G. Lee: Acta Mater., 2002, vol. 50, pp. 4755-4762.10.1016/S1359-6454(02)00313-0 ↗
26. K. Shi, H. Hou, J.B. Chen, L.T. Kong, H.Q. Zhang and J.F. Li: Steel Research Int., 2016, vol. 87, pp. 165-172.10.1002/srin.201400596 ↗
27. Y.L. Zhou, T. Jia, X.J. Zhang, Z.Y. Liu and R.D.K. Misra: J. Mater. Process. Technol., 2015, vol. 219, pp. 314-320.10.1016/j.jmatprotec.2014.12.017 ↗
28. P. Haušild, I. Nedbal, C. Berdin and C. Prioul: Mater. Sci. Eng. A, 2002, vol. 335, pp. 164-174.10.1016/S0921-5093(01)01913-X ↗
29. X.C. Arnoult, M. Růžičková, K. Kunzová: Frattura ed Integrità Strutturale, 2016, vol.35, pp. 509-522.
30. M.S. Joo, D.W. Suh, J.H. Bae and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2012, vol. 546, pp. 314-322.10.1016/j.msea.2012.03.079 ↗
31. B.L. Bramfitt, A.R. Marder: Metall. Trans. A, 1977, vol. 8, pp. 1263-1273.10.1007/BF02643841 ↗
32. A.J. McEvely, R.H. Rush: Trans ASM, 1962, vol. 55, pp. 654-666.