journal article·2015-06

Thermal Response on the Microstructure and Texture of ECAP and Cold-Rolled Pure Magnesium

Somjeet Biswas, D. Satyaveer Singh, Benoît Beausir, Laszlo S. Toth, Satyam Suwas

Publisher page

Abstract

This paper deals with dynamic recrystallization (DRX), static recrystallization, and grain growth phenomena of pure magnesium after equal channel angular pressing (ECAP) by route A and BC at 523 K (250 °C) followed by 80 pct cold rolling. The ECAP-deformed and the subsequently rolled samples were annealed at 373 K and 773 K (100 °C and 500 °C). The associated changes in the microstructure and texture were studied using electron back-scattered diffraction. ECAP produced an average grain size of ~12 to 18 µm with B and C2 fiber textures. Subsequent rolling led to an average grain size ~8 to 10 µm with basal texture fiber parallel to ND. There was no noticeable increase in the average grain size on annealing at 373 K (100 °C). However, significant increase in the average grain size occurred at 773 K (500 °C). The occurrence of different DRX mechanisms was detected: discontinuous dynamic recrystallization was attributed to basal slip activity and continuous dynamic recovery and recrystallization to prismatic/pyramidal slip systems. Only continuous static recrystallization could be observed on annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. A. Stalmann, W. Sebastian, H. Friedrich, S. Schumann and K. Dröder: Adv. Engg. Mater., 2001, vol. 3, p. 969-74.10.1002/1527-2648(200112)3:12<969::AID-ADEM969>3.0.CO;2-9 ↗
2. R. Reed-Hill and W. Robertson: Trans. Met. Soc. AIME, 1957, vol. 220, pp. 496–502.
3. J.W. Li, W. Xu, X.L. Wu, H. Ding and K. Xia: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5993–98.10.1016/j.msea.2011.04.045 ↗
4. S. Suwas, G. Gottstein and R. Kumar: Mater. Sci. Eng. A, 2007, vol. 471, pp. 1-14.10.1016/j.msea.2007.05.030 ↗
5. S. Biswas, D.S. Singh and S. Suwas: Acta. Mater., 2010, vol. 58, p. 3247–61.10.1016/j.actamat.2010.01.051 ↗
6. M. Mabuchi, K. Ymeyama, H. Iwasaki and K. Higashi: Acta. Mater., 1999, vol. 47, pp. 2047–57.10.1016/S1359-6454(99)00094-4 ↗
7. S. Kamodo, T. Ashie, H. Yamada, K. Sanbun and Y. Kojima: Mater. Sci. Forum, 2000, vol. 65, pp. 350–51.
8. S.R. Agnew, G.M. Stoica, L. Chen, T.M. Lillo, J. Macheset and P.K. Liaw: in Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, eds., Ultra fine grain Materials II, Warrendale, PA: TMS, 2002, pp. 643-652.10.1002/9781118804537.ch72 ↗
9. J. Koike, T. Koboyashi, T. Mukai, H. Watanabe, M. Suzuki, K. Muruyama and K. Higashi: Acta. Mater., 2003, vol. 51, pp. 2055-2065.10.1016/S1359-6454(03)00005-3 ↗
10. M.R. Barnett, Z. Keshavarz, A.G. Beer and D. Atwell: Acta. Mater., 2004, vol. 52, pp. 5093-5103.10.1016/j.actamat.2004.07.015 ↗
11. T. Mukai, M. Yananoi, H. Watanabe and K. Higashi: Scripta Mater., 2001, vol. 45, pp. 89-94.10.1016/S1359-6462(01)00996-4 ↗
12. W.J. Kim, C.W. An, Y.S. Kim and S. I. Hong: Scripta Mater., 2002, vol. 47, pp. 39-44.10.1016/S1359-6462(02)00094-5 ↗
13. T. Mukai, Y. Masashi and K. Iligashi: Mater. Trans. JIM, 2001, vol. 42, pp. 2652–54.10.2320/matertrans.42.2652 ↗
14. R. Gehrman and G. Gottstein: in Proc. of ICOTOM-12, J. A. Szpuner, ed., NRC Research Press, Montreal, vol. 1, 1999, pp. 665–70.
15. H.Y. Chao, H.F. Sun, W.Z. Chen and E.D. Wang: Mater. Character. 2011, vol. 62, pp. 312–20.10.1016/j.matchar.2011.01.007 ↗
16. A. Jäger, P. Lukac, V. Gartnerova, J. Haloda and M. Dopita: Mater. Sci. Eng. A, 2006, vol. 432, pp. 20–25.10.1016/j.msea.2006.06.070 ↗
17. K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi and D. Letzig: Scripta Mater., 2010, vol. 63, pp. 725–730.10.1016/j.scriptamat.2009.12.033 ↗
18. É. Martin and J. J. Jonas: Acta. Mater., 2010, vol. 58, pp. 4253–4266.10.1016/j.actamat.2010.04.017 ↗
19. Z. Zhang, M-P. Wang, N. Jiang and S-M. Li: Mater. Sci. Eng., A, 2010, vol. 527, pp. 6467-6473.10.1016/j.msea.2010.06.079 ↗
20. Y. Xu-Yue, H. Himura and T. Sakai: Trans. Nonfer. Met. Soc. China, 2007, vol. 17, pp.1139-1142.10.1016/S1003-6326(07)60239-8 ↗
21. A. Yamamoto, M. Kakishiro, M. Ikeda and H. Tsubakino: Mat. Sc. Forum, 2004, vol, 449-452, p. 669-673.10.4028/www.scientific.net/MSF.449-452.669 ↗
22. S.W. Su, L. Lu and M.O. Lai: Phil. Mag., 2008, vol. 88, p. 181-200.10.1080/14786430701805566 ↗
23. M.T. Pérez-Prado and O.A. Ruano: Scripta Mater., 2002, vol. 46, pp. 149-155.10.1016/S1359-6462(01)01212-X ↗
24. M.T. Pérez-Prado and O.A. Ruano: Scripta Mater., 2003, vol. 48, pp. 59-64.10.1016/S1359-6462(02)00346-9 ↗
25. X.Y. Yang, H. Miura and T. Sakai: Mater. Trans., 2005, vol. 46, pp. 2981–2987.10.2320/matertrans.46.2981 ↗
26. L.W.F. Mackenzie and M. Pekguleryuz : Mater. Sci. Eng. A, 2008, vol. 480, pp. 189–197.10.1016/j.msea.2007.07.003 ↗
27. S. Abdessameud and D. Bradai: Can. Metall. Q., 2009, vol. 48, pp. 433–442.10.1179/cmq.2009.48.4.433 ↗
28. X. Huang, K. Suzuki and Y. Chino: Mater. Sc. Eng. A, 2013, vol. 560, pp. 232–240.10.1016/j.msea.2012.09.062 ↗
29. É. Martin, L.Jiang, S.Godet and J.J.Jonas: Int. J. Mater. Res., 2009, vol. 100, pp. 576–583.10.3139/146.110060 ↗
30. S. B. Yi, I. Schestakow and S. Zaefferer: Mater. Sci. Eng. A, 2009, vol. 516, pp. 58–64.10.1016/j.msea.2009.03.015 ↗
31. K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi and D. Letzig: Scripta Mater., 2010, vol. 63, pp. 725–730.10.1016/j.scriptamat.2009.12.033 ↗
32. L. Lu, T. Liu, M-J Tan, J. Chen and Z. Wang: Mater. Design, 2012, vol. 39, pp. 131–139.10.1016/j.matdes.2012.02.035 ↗
33. A. Ostapovets, P. Šedá, A. Jäger and P. Lejček: Scripta Mater., 2011, vol. 64, pp. 470–473.10.1016/j.scriptamat.2010.11.011 ↗
34. J.P. Mathieu, S. Suwas, A. Eberhardt, L.S. Toth and P. Moll: J. Mater. Proc. Tech., 2006, vol. 173, p. 29-33.10.1016/j.jmatprotec.2005.11.007 ↗
35. S. Biswas, B.Beausir, L.S. Toth and S. Suwas: Acta Mater., 2013, vol. 61, pp. 5263-5277.10.1016/j.actamat.2013.05.018 ↗
36. L.S. Toth, S. Biswas, B. Beausir and C.-F. Gu: Mater. Charact., 2013, vol. 84, pp. 67–71.10.1016/j.matchar.2013.07.013 ↗
37. B. Beausir, L.S. Toth, and K.W. Neale, Acta Mater., 2007, vol. 55, pp. 2695–2705.10.1016/j.actamat.2006.12.021 ↗
38. B. Beausir, S. Suwas, L.S.Toth, K.W. Neale and J.J. Fundenberger: Acta. Mater., 2008, vol. 56, pp. 200-214.10.1016/j.actamat.2007.09.032 ↗
39. B. Beausir, S. Biswas, D.-I. Kim, L.S. Toth and S. Suwas: Acta. Mater., vol. 57, pp. 5061–5077.10.1016/j.actamat.2009.07.008 ↗
40. Y. Zhong, F. Yin, T. Sakaguchi, K. Nagai and K. Yang: Acta Mater., 2007, vol. 55, pp. 2747–56.10.1016/j.actamat.2006.12.012 ↗
41. S. Biswas, D.S. Singh, A. Bhowmik and S. Suwas: Mater. Sci. Forum, 2008, vol. 584-586, pp. 343-384.10.4028/www.scientific.net/MSF.584-586.343 ↗
42. A.E. Smith: Surface Science, 2007, vol. 601, pp. 5762-5765.10.1016/j.susc.2007.06.055 ↗
43. L. Jin, D. Lin, D. Mao, X. Zeng, B. Chen and W. Ding: Mater. Sci. Eng. A, 2006, vol. 423, pp. 247-252.10.1016/j.msea.2006.02.045 ↗
44. R.K. Nadella, I. Samajdar, and G. Gottstein: in Proc. Magnesium Alloys and their Applications, K.U. Kainer ed., Wiley-VCH, Weinheim 2003, p. 1052.10.1002/3527603565.ch163 ↗
45. S.E. Ion, F.J. Humphreys and S.H. White: Acta. Metal., 1982, vol. 30, pp. 1909-1919.10.1016/0001-6160(82)90031-1 ↗
46. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004.
47. A. Galiyev, R. Kaibyshev and G. Gottstein: Acta. Mater., 2001, vol. 49, pp. 1199-1207.10.1016/S1359-6454(01)00020-9 ↗
48. J.C. Tan and M.Y. Tan: Mater. Sci. Engg. A, 2003, vol. 339, pp. 124–32.10.1016/S0921-5093(02)00096-5 ↗
49. S.R. Agnew, P. Mehrotra, T.M. Lillo, G.M. Stoica and P.K. Liaw: Mater. Sci. Eng. A, 2005, vol. 408, pp. 72-78.10.1016/j.msea.2005.07.052 ↗
50. X. Shen, L. Lian, Z. Jiang and Q. Jiang: Mater. Sci. Eng. A, 2008, vol. 487, pp. 410–16.10.1016/j.msea.2007.10.018 ↗
51. J.A. del Valle and O.A. Ruano: Mater. Sci. Eng. A, 2008, vol. 487, pp. 473-80.10.1016/j.msea.2007.11.024 ↗
52. S. Biswas, D.-I. Kim, S. Suwas: Mater. Sci. Eng. A, 2012, vol. 550, pp. 19-30.10.1016/j.msea.2012.03.099 ↗