M3B2 and M5B3 Formation in Diffusion-Affected Zone During Transient Liquid Phase Bonding Single-Crystal Superalloys
Source abstract
Abstract
Precipitates in the diffusion-affected zone (DAZ) during transient liquid phase bonding (TLP) single-crystal superalloys were observed and investigated. Small size and dendritic-shaped precipitates were identified to be M3B2 borides and intergrowth of M3B2/M5B3 borides. The orientation relationships among M3B2, M5B3, and matrix were determined using transmission electron microscope (TEM). Composition characteristics of these borides were also analyzed by TEM energy-dispersive spectrometer. Because this precipitating phenomenon deviates from the traditional parabolic transient liquid phase bonding model which assumed a precipitates free DAZ during TLP bonding, some correlations between the deviation of the isothermal solidification kinetics and these newly observed precipitating behaviors were discussed and rationalized when bonding the interlayer containing the high diffusivity melting point depressant elements and substrates of low solubility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. R. Broomfield: Book-institute of materials, 2000, vol. 736, pp. 741-54.
2. B. Laux, S. Piegert, and J. Rösler: Metallurgical and Materials Transactions A, 2009, vol. 40A, pp. 138-49.10.1007/s11661-008-9702-3 ↗
3. A. Schnell, A. Stankowski, and E. de Marcos: ASME Turbo Expo-Power for Land, Sea, and Air: American Society of Mechanical Engineers, Montreal 2006. pp. 949-61.
4. A. Elrefaey, and W. Tillmann: Metallurgical and Materials Transactions A, 2007, vol. 38A, pp. 2956-62.10.1007/s11661-007-9357-5 ↗
5. W.F. Gale, D.A. Butts, T. Zhou, and M. Di Ruscio: Metallurgical and Materials Transactions A, 2002, vol. 33A, pp. 3205-14.10.1007/s11661-002-0306-z ↗
6. W.F. Gale, Y. Xu, X. Wen, and Z.A.M. Abdo: Metallurgical and Materials Transactions A, 1999, vol. 30A, pp. 2723-26.10.1007/s11661-999-0313-4 ↗
7. T. Khan, M. Kabir, and R. Bulpett: Materials Science and Engineering: A, 2004, vol. 372 (1), pp. 290-95.10.1016/j.msea.2004.01.023 ↗
8. D.Q. Sun, X.Y. Gu, and W.H. Liu: Materials Science and Engineering: A, 2005, vol. 391 (1–2), pp. 29-33.
9. D. Duvall, W. Owczarski, and D. Paulonis: Welding Journal, 1974, vol. 54(4), pp. 203-14.
10. O. Ojo, N. Richards, and M. Chaturvedi: Science and Technology of Welding & Joining, 2004, vol. 9 (6), pp. 532-40.10.1179/174329304X8702 ↗
11. F. Jalilian, M. Jahazi, and R.A.L. Drew: Materials Science and Engineering: A, 2006, vol. 423 (1–2), pp. 269-81.10.1016/j.msea.2006.02.030 ↗
12. T. Padron, T.I. Khan, and M.J. Kabir: Materials Science and Engineering: A, 2004, vol. 385 (1–2), pp. 220-28.10.1016/j.msea.2004.06.034 ↗
13. J. Askew, J. Wilde, and T. Khan: Materials Science and Technology, 1998, vol. 14 (9-10), pp. 920-24.10.1179/mst.1998.14.9-10.920 ↗
14. Y. Zhai, T.H. North, and J. Serrato-Rodrigues: Journal of Materials Science, 1997, vol. 32 (6), pp. 1393-97.10.1023/A:1018529228375 ↗
15. W. MacDonald, and T. Eagar: Annual review of materials science, 1992, vol. 22 (1), pp. 23-46.10.1146/annurev.ms.22.080192.000323 ↗
16. W.F. Gale, and D. Butts: Science and Technology of Welding & Joining, 2004, vol. 9 (4), pp. 283-300.10.1179/136217104225021724 ↗
17. M. Abdelfatah, and O. Ojo: Metallurgical and Materials Transactions A, 2009, vol. 40A, pp. 377-85.10.1007/s11661-008-9726-8 ↗
18. O. Ojo, and M. Abdelfatah: Materials Science and Technology, 2008, vol. 24 (6), pp. 739-43.10.1179/174328408X281958 ↗
19. K. Tokoro, N. Wikstrom, O. Ojo, and M. Chaturvedi: Materials Science and Engineering: A, 2008, vol. 477 (1), pp. 311-18.10.1016/j.msea.2007.05.069 ↗
20. S. Steuer, and R. Singer: Metallurgical and Materials Transactions A, 2013, vol. 44A, pp. 2226-32.10.1007/s11661-012-1597-3 ↗
21. I. Tuah-Poku, M. Dollar, and T.B. Massalski: Metallurgical Transactions A, 1988, vol. 19 (3), pp. 675-86.10.1007/BF02649282 ↗
22. O. Idowu, O. Ojo, and M. Chaturvedi: Metallurgical and Materials Transactions A, 2006, vol. 37A, pp. 2787-96.10.1007/BF02586111 ↗
23. N. Sheng, J. Liu, T. Jin, X. Sun, and Z. Hu: Philosophical Magazine, 2014, vol. 94 (11), pp. 1219-34.10.1080/14786435.2014.885136 ↗
24. M. Pouranvari, A. Ekrami, and A. Kokabi: Materials Science and Engineering: A, 2008, vol. 490 (1), pp. 229-34.10.1016/j.msea.2008.01.032 ↗
25. N. Sheng, J. Liu, T. Jin, X. Sun, and Z. Hu: Metallurgical and Materials Transactions A, 2013, vol. 44A, pp. 1793-804.10.1007/s11661-012-1540-7 ↗
26. H. Zhang, O. Ojo, and M. Chaturvedi: Scripta Materialia, 2008, vol. 58 (3), pp. 167-70.10.1016/j.scriptamat.2007.09.049 ↗
27. S. Pennycook: Advances in Imaging and Electron Physics, 2002, vol. 123, pp.173-206.10.1016/S1076-5670(02)80063-5 ↗
28. A.T. Egbewande, H. Zhang, R. Sidhu, and O. Ojo: Metallurgical and Materials Transactions A, 2009, vol. 40A, pp. 2694-704.10.1007/s11661-009-9962-6 ↗
29. H. Zhang, and O. Ojo: Journal of Materials Science, 2008, vol. 43 (17), pp. 6024-28.10.1007/s10853-008-2886-5 ↗
30. H.-R. Zhang, and O. Ojo: Philosophical Magazine, 2010, vol. 90 (6), pp. 765-82.10.1080/14786430903270643 ↗
31. X. Hu, Y. Zhu, N. Sheng, and X. Ma: Sci. Rep., 2014, vol. 4, art. no. 7367, DOI:10.1038/srep07367.10.1038/srep07367 ↗
32. K. Portnoi, V. Romashov, V. Chubarov, M.K. Levinskaya, and S. Salibekov: Soviet Powder Metallurgy and Metal Ceramics, 1967, vol. 6 (2), pp. 99-103.10.1007/BF00775639 ↗
33. A. Schnell: PhD Thesis, EPFL (École Polytechnique Fédérale de Lausanne), Faculté des Sciences et Techniques de l’ingénieur, 2014, p. 114.
34. M. Kurban, U. Erb, and K. Aust: Scripta materialia, 2006, vol. 54 (6), pp. 1053-58.10.1016/j.scriptamat.2005.11.055 ↗
35. H. Ikawa, Y. Nakao, and T. Isai: Trans. Jpn. Weld. Soc., 1979, vol. 10 (1), pp. 25-29.
36. H. Beattie: Acta Crystallographica, 1958, vol. 11 (9), pp. 607-09.10.1107/S0365110X58001626 ↗