Effects of Annealing on Carbides Size and Distribution and Cold Formability of 1.0C-1.5Cr Bearing Steel
Source abstract
Abstract
In order to control the size and distribution of carbides and improve the cold formability of 1.0C-1.5Cr bearing steel, the effects of annealing parameters during isothermal spheroidization were studied. Mean diameter of carbides (D), interparticle spacing of carbides (s), number of carbides per area (n), and carbides particle size distribution were measured. The cold formability was evaluated through hardness and fracture strain. The results show that when austenitizing time increases from 0.5 to 7 hours or austenitizing temperature increases from 1033 K to 1153 K (760 °C to 880 °C), the values of D and s both increase, and the value of n decreases. With the increasing of second annealing time from 0.5 to 2 hours or the increasing of second annealing temperature from 953 K to 993 K (680 °C to 720 °C), the values of D and s tend to increase and the value of n decreases. According to the measured values of D, s, and n, two models describing their relationships were proposed. In addition, the hardness decreases with the increasing of D. The fracture strain changes slightly at first and then decreases significantly when the value of D exceeds 0.36 μm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. H.S. Di, X.M. Zhang, G.D. Wang and X.H. Liu: J. Mater. Process. Technol., 2005, vol. 166, pp. 359-63.10.1016/j.jmatprotec.2004.07.085 ↗
2. H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2012, vol. 57, pp. 268-435.10.1016/j.pmatsci.2011.06.002 ↗
3. A.K. Gogia and A.M. Gokhale: Metall. Trans. A, 1980, vol. 11A, pp. 1077-80.10.1007/BF02654725 ↗
4. J.W. Lee, J.C. Lee, Y.S. Lee, K.T. Park and W.J. Nam: J. Mater. Process. Technol., 2009, vol. 209, pp. 5300-04.10.1016/j.jmatprotec.2009.03.019 ↗
5. J. Krawczyk, E. Rożniata and J. Pacyna: J. Mater. Process. Technol., 2005, vols. 162-163, pp. 336-41.10.1016/j.jmatprotec.2005.02.097 ↗
6. K.H. Kim, S.D. Park, J.H. Kim and C.M. Bae: Met. Mater. Int., 2012, vol. 18, pp. 917-21.10.1007/s12540-012-7002-3 ↗
7. Y.L. Tian and R.W. Kraft: Metall. Trans. A, 1987, vol. 18A, pp. 1403-14.10.1007/BF02646654 ↗
8. Y.L. Tian and R.W. Kraft: Metall. Trans. A, 1987, vol. 18A, pp. 1359-69.10.1007/BF02646650 ↗
9. Y.T. Wang, Y. Adachi, K. Nakajima and Y. Sugimoto: Acta Mater., 2010, vol. 58, pp. 4849-58.10.1016/j.actamat.2010.05.023 ↗
10. Y.G. Ko, S. Namgung, D.H. Shin, I.H. Son, K.H. Rhee and D.L. Lee: J. Mater. Sci., 2010, vol. 45, pp. 4866-70.10.1007/s10853-010-4587-0 ↗
11. J. Arruabarrena, B. López and J.M. Rodriguez-Ibabe: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1470-84.10.1007/s11661-013-2066-3 ↗
12. U.G. Gang, J.C. Lee and W.J. Nam: Met. Mater. Int., 2009, vol. 15, pp. 719-25.10.1007/s12540-009-0719-3 ↗
13. Ö.E. Atasoy and S. Özbilen: J. Mater. Sci., 1989, vol. 24, pp. 281-87.10.1007/BF00660968 ↗
14. J.D. Verhoeven: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2431-38.10.1007/s11661-000-0188-x ↗
15. B. Wang, X. Song and H. Peng: Mater. Des., 2007, vol. 28, pp. 562-68.10.1016/j.matdes.2005.08.008 ↗
16. K.H. Kim, J.S. Lee and D.L. Lee: Met. Mater. Int., 2010, vol. 16, pp. 871-76.10.1007/s12540-010-1203-4 ↗
17. J.D. Verhoeven and E.D. Gibson: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1181-89.10.1007/s11661-998-0245-4 ↗
18. N.V. Luzginova, L. Zhao and J. Sietsma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 513-21.10.1007/s11661-007-9403-3 ↗
19. Y. Liu, T. He, G. Peng and F. Lian: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2144-52.10.1007/s11661-011-0608-0 ↗
20. J.J. Sun, F.L. Lian, H.J. Liu, T. Jiang, S.W. Guo, L.X. Du and Y.N. Liu: Mater. Charact., 2014, vol. 95, pp. 291-98.10.1016/j.matchar.2014.07.011 ↗
21. E.L. Brown and G. Krauss: Metall. Trans. A, 1986, vol. 17A, pp. 31-36.10.1007/BF02644439 ↗
22. S. Holmberg, B. Enquist and P. Thilderkvist: J. Mater. Process. Technol., 2004, vol. 145, pp.72-83.10.1016/j.jmatprotec.2003.07.004 ↗
23. E. Karadeniz: Mater. Des., 2008, vol. 29, pp. 251-56.10.1016/j.matdes.2006.11.015 ↗
24. C.C. Chou and P.W. Kao: J. Mater. Sci., 1986, vol. 21, pp. 3339-44.10.1007/BF00553377 ↗
25. W. Song, P.P. Choi, G. Inden, U. Prahl, D. Raabe and W. Bleck: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 595-606.10.1007/s11661-013-2048-5 ↗
26. K.T. Park, S.K. Cho and J.K. Choi: Scripta. Mater., 1997, vol. 37, pp. 661-66.10.1016/S1359-6462(97)00138-3 ↗
27. K. Ryttberg, M. Knutson Wedel, V. Recina, P. Dahlman and L. Nyborg: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2431-36.10.1016/j.msea.2009.12.016 ↗
28. J. Toribio, B. González and J.C. Matos: Eng. Fract. Mech., 2010, vol. 77, pp. 2024-32.10.1016/j.engfracmech.2010.02.003 ↗