Increased Toughness of Zirconium-Based Bulk Metallic Glasses Tested under Mixed Mode Conditions
Source abstract
Abstract
The effects of mixed mode loading on the fracture behavior of Zr-based bulk metallic glasses (BMGs) (Vitreloy I and Vitreloy 106) were investigated. Mixed mode I/II and mixed mode I/III fracture conditions were tested using both notched and fatigue-precracked specimens. Fully amorphous samples exhibited tremendous increases in fracture energy with the application of mixed mode loading, while partially crystalline samples exhibited more modest increases. A comparison to the behavior of other material systems (e.g., polymers, ceramics, crystalline metals, and composites) illustrates the tremendous increase in fracture energy exhibited by these BMGs under mixed mode loading conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. J. Lu, G. Ravichandran, and W.L. Johnson: Acta Mater., 2003, vol. 51 (12), pp. 3429–43.10.1016/S1359-6454(03)00164-2 ↗
2. P. Lowhapandu, L.A. Ludrosky, S.L. Montgomery, and J.J. Lewandowski: Intermetallics, 2000, vol. 8, pp. 487–92.10.1016/S0966-9795(99)00137-5 ↗
3. J.J. Lewandowski: Mater. Trans., JIM, 2001, vol. 42 (4), pp. 633–37.10.2320/matertrans.42.633 ↗
4. G. Wang, J. Shen, J.F. Sun, Z.P. Lu, Z.H. Stachurski, and B.D. Zhou: Intermetallics, 2005, vol. 13 (6), pp. 642–48.10.1016/j.intermet.2004.10.011 ↗
5. A.T. Alpas, L. Edwards, and C.N. Reid: Metall. Trans. A, 1989, vol. 20A, pp. 1395–1409.10.1007/BF02665497 ↗
6. C.J. Gilbert, R.O. Ritchie, and W.L. Johnson: Appl. Phys. Lett., 1997, vol. 71 (4), pp. 476–78.10.1063/1.119610 ↗
7. C.J. Gilbert, V. Schroeder, and R.O. Ritchie: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1739–53.10.1007/s11661-999-0173-y ↗
8. C.J. Gilbert, J.M. Lippmann, and R.O. Ritchie: Scripta Mater., 1998, vol. 38 (4), pp. 537–42.10.1016/S1359-6462(97)00522-8 ↗
9. B.C. Menzel and R.H. Dauskardt: Acta Mater., 2006, vol. 54 (4), pp. 935–43.10.1016/j.actamat.2005.10.021 ↗
10. K.M. Flores and R.H. Dauskardt: Scripta Mater., 1999, vol. 41 (9), pp. 937–43.10.1016/S1359-6462(99)00243-2 ↗
11. R.D. Conner, A.J. Rosakis, W.L. Johnson, and D.M. Owen: Scripta Mater., 1997, vol. 37 (9), pp. 1373–78.10.1016/S1359-6462(97)00250-9 ↗
12. P. Lowhaphandu and J.J. Lewandowski: Scripta Metall. Mater., 1998, vol. 38 (12), pp. 1811–17.10.1016/S1359-6462(98)00102-X ↗
13. R.W. Margevicius, J. Riedle, and P. Gumbsch: Mater. Sci. Eng., 1999, vol. A270, pp. 197–209.10.1016/S0921-5093(99)00252-X ↗
14. T.M. Maccagno and J.F. Knott: Eng. Fract. Mech., 1989, vol. 34 (1), pp. 65–86.10.1016/0013-7944(89)90243-9 ↗
15. D. Bhattacharjee and J.F. Knott: Acta Metall. Mater., 1994, vol. 42 (5), pp. 1747–54.10.1016/0956-7151(94)90385-9 ↗
16. T.M. Maccagno and J.F. Knott: Eng. Fract. Mech., 1992, vol. 41 (6), pp. 805–20.10.1016/0013-7944(92)90233-5 ↗
17. S.V. Kamat and J.P. Hirth: Acta Mater., 1996, vol. 44, pp. 201–08.10.1016/1359-6454(95)00169-8 ↗
18. O.R. Kashyap: Ph.D. Thesis, Nanyang Technological University, Singapore, 1999.
19. K.M. Flores and R.H. Dauskardt: J. Mech. Phys. Solids, 2006, vol. 54 (11), pp. 2418–35.10.1016/j.jmps.2006.05.003 ↗
20. A.K. Thurston: MS Thesis, Case Western Reserve University, Cleveland, OH, 2004.
21. “ASTM E 1820-01 Standard Test Method for Measurement of Fracture Toughness,” Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2001.
22. W.K. Jen, H.C. Lin, and K. Hua: Fracture, 1977, vol. 4, pp. 123–33.
23. L.P. Pook: Eng. Fract. Mech., 1971, vol. 3, pp. 205–18.10.1016/0013-7944(71)90032-4 ↗
24. M. Manoharan and J.J. Lewandowski: J. Compos., 1991, vol. 25, pp. 831–41.
25. J.J. Lewandowski and P. Lowhaphandu: Philos. Mag. A, 2002, vol. 82 (17–18), pp. 3427–41.10.1080/01418610208240453 ↗
26. P. Lowhaphandu, S.L. Montgomery, and J.J. Lewandowski: Scripta Mater., 1999, vol. 41 (1), pp. 19–24.10.1016/S1359-6462(99)00128-1 ↗
27. P. Murah and U. Ramamurty: Acta Mater., 2005, vol. 53 (5), pp. 1467–78.10.1016/j.actamat.2004.11.040 ↗
28. X.J. Gu, S.J. Poon, G.J. Shiflet, and J.J. Lewandowski: Scripta Mater., 2009, vol. 60, pp. 1027–30.10.1016/j.scriptamat.2009.02.037 ↗
29. J.J. Lewandowski, M. Shazly, and A.S. Nouri: Scripta Mater., 2006, vol. 54 (3), pp. 337–41.10.1016/j.scriptamat.2005.10.010 ↗
30. A.A. Griffith: Philos. Trans. R. Soc., 1920, vol. 221, pp. 163–98.
31. J.G. Schroth, J.P. Hirth, R.G. Hoagland, and A.R. Rosenfield: Metall. Trans. A, 1987, vol. 18A, pp. 1061–72.10.1007/BF02668555 ↗
32. M. Manoharan, J.P. Hirth, and A.R. Rosenfield: Acta Metall. Mater., 1991, vol. 39, (6), pp. 1203–10.10.1016/0956-7151(91)90208-I ↗
33. A. El Shabasy and J.J. Lewandowski: Mater. Sci. Technol., 2009, vol. 13 (4), pp. 369–78.10.1179/174328408X317237 ↗
34. K. Kishimoto, M. Notomi, S. Kadota, T. Shibuya, N. Kawamura, and T. Kawakami: Mixed-Mode Fracture Behavior of Silica Particulate Filled Epoxide Resin, ASTM STP 1359, ASTM, W. Conshohoken, PA, 1999, pp. 129–42.10.1520/STP14247S ↗
35. F. Erdogan and G.C. Sih: J. Basic Eng., 1963, vol. 85, pp. 519–27.10.1115/1.3656897 ↗
36. G.C. Sih: Mechanics of Fracture 1: A Special Theory of Crack Propagation, Noordhoff International Publishing, Leyden, The Netherlands, 1973.
37. K. Palaniswamy and W.G. Knauss: in Mechanics Today, S. Nemat-Nasser, ed., 1978, Pergamon Press, Oxford, UK, pp. 87–148.10.1016/B978-0-08-021792-5.50010-0 ↗
38. F.A. McClintock and S.M. Kaplan: Int. J. Fract. Mech., 1966, vol. 2, pp. 614–27.10.1007/BF00184558 ↗
39. D. Bhattacharjee and J.F. Knott: Mater. Sci. Technol., 2007, vol. 23 (11), pp. 1269–77.10.1179/174328407X192886 ↗
40. J.B. Caris and J.J. Lewandowski: Acta Mater., 2009, in press.
41. K.M. Flores and R.H. Dauskardt: Acta Mater., 2001, vol. 49 (13), pp. 2527–37.10.1016/S1359-6454(01)00125-2 ↗
42. W.J. Wright, R. Saha, and W.D. Nix: Mater. Trans., 2001, vol. 42 (4), pp. 642–49.10.2320/matertrans.42.642 ↗
43. Z.F. Zhang, J. Eckert, and L. Schultz: Acta Mater., 2003, vol. 51 (4), pp. 1167–79.10.1016/S1359-6454(02)00521-9 ↗
44. G. Sunny, F.P. Yuan, V. Prakash, and J. Lewandowski: J. Appl. Phys., 2008, vol. 104 (9), pp. 93522–29.10.1063/1.3009962 ↗
45. F. Yuan, V. Prakash, and J.J. Lewandowski: SEM IX Int. Congr. on Experimental and Applied Mechanics, Society of Experimental Mechanics, Bethel, CT, 2008, paper no. 336.