Prediction of Inhomogeneous Distribution of Microalloy Precipitates in Continuous-Cast High-Strength, Low-Alloy Steel Slab
Source abstract
Abstract
Spatial distribution in size and frequency of microalloy precipitates have been characterized in two continuous-cast high-strength, low-alloy steel slabs, one containing Nb, Ti, and V and the other containing only Ti. Microsegregation during casting resulted in an inhomogeneous distribution of Nb and Ti precipitates in as-cast slabs. A model has been proposed in this study based on the detailed characterization of cast microalloy precipitates for predicting the spatial distribution in size and volume fraction of precipitates. The present model considers different models, which have been proposed earlier. Microsegregation during solidification has been predicted from the model proposed by Clyne and Kurz. Homogenization of alloying elements during cooling of the cast slab has been predicted following the approach suggested by Kurz and Fisher. Thermo-Calc software predicted the thermodynamic stability and volume fraction of microalloy precipitates at interdendritic and dendritic regions. Finally, classical nucleation and growth theory of precipitation have been used to predict the size distribution of microalloy precipitates at the aforementioned regions. The accurate prediction and control over the precipitate size and fractions may help in avoiding the hot-cracking problem during casting and selecting the processing parameters for reheating and rolling of the slabs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Book 615, The Institute of Materials, London, UK, 1997, p. 80.
2. B. Dutta, E. Valdes, and C.M. Sellars: Acta Metall. Mater., 1992, vol. 40, pp. 653–62.10.1016/0956-7151(92)90006-Z ↗
3. T. Gladman: Proc. of Royal Society of London, 1966, vol. 294, pp. 298–309.10.1098/rspa.1966.0208 ↗
4. D. Chakrabarti, C.L. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1963–77.10.1007/s11661-008-9535-0 ↗
5. L.P. Zhang, C.L. Davis, and M. Strangwood: Proc. Conf. on ‘Thermomechanical Processing of Steels, IoM Communications, London, UK, 2000, pp. 764–75.
6. H.J. Jun, K.B. Kang, and C.G. Park: Scripta Mater., 2003, vol. 49, pp. 1081–86.10.1016/j.scriptamat.2003.08.013 ↗
7. A.G. Kneissi, C.I. Garcia, and A.J. DeArdo: Proc. 2nd Int. Conf. on HSLA Steels: Processing, Properties and Applications, G. Tither and Z. Shouhua, eds., TMS, Warrendale, PA, 1992, pp. 99–105.
8. H. Kejian and T.N. Baker: Proc. of Conf. on Titanium Technology in Microalloyed Steels, T.N. Baker, ed., Book 662, The Institute of Materials, London, UK, 1997, pp. 115–32.
9. B. Mintz and D.N. Crowther: Proc. of Conf. on Titanium Technology in Microalloyed Steels, T.N. Baker, ed., Book 662, The Institute of Materials, London, UK, 1997, pp. 98–114.
10. D.W. Tian, L.P. Karjalianen, B. Qian, and X. Chen: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 4031–38.10.1007/BF02595652 ↗
11. P.H. Li, A.K. Ibraheem, and R. Priestner: Mater. Sci. Forum, 1998, vols. 284–286, pp. 517–524.10.4028/www.scientific.net/MSF.284-286.517 ↗
12. M.J. Leap and E.L. Brown: Scripta Mater., 2002, vol. 47, pp. 793–97.10.1016/S1359-6462(02)00283-X ↗
13. A.J. Craven, K. He, L.A.J. Garvie, and T.N. Baker: Acta Mater., 2000, vol. 48, pp. 3857–68.10.1016/S1359-6454(00)00194-4 ↗
14. A.J. Craven, K. He, L.A.J. Garvie, and T.N. Baker: Acta Mater., 2000, vol. 48, pp. 3869–78.10.1016/S1359-6454(00)00193-2 ↗
15. M.T. Nagata, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3099–110.10.1007/s11661-002-0294-z ↗
16. A. Ruiz-Aparicio: Master’s Thesis, University of Pittsburgh, Pittsburgh, PA, 2004.
17. C. Zhou and R. Priestner: ISIJ Int., 1996, vol. 36, pp. 1397–1405.10.2355/isijinternational.36.1397 ↗
18. C.L. Davis and M. Strangwood: J. Mater. Sci., 2002, vol. 37, pp. 1083–90.10.1023/A:1014342800399 ↗
19. R. Varano, A.M. Elwazri, F. Siciliano, D. Bain, R. Gawin, and S. Yue: Mater. Sci. Forum, 2005, vols. 500–501, pp. 663–68.10.4028/www.scientific.net/MSF.500-501.663 ↗
20. A.J. Couch: Ph.D. Dissertation, University of Leeds, UK, 2001.
21. M. Puder, S. Zamberger, K. Spiradek-Hahn, and E. Kozeschnik: Steel Res. Int., 2010, vol. 81, pp. 372–80.10.1002/srin.201000021 ↗
22. G.A. de Toledo, A. Arteaga, and J.J. Larau Dogoita: Mater. Sci. Forum, 2005, vols. 500–501, pp. 163–70.10.4028/www.scientific.net/MSF.500-501.163 ↗
23. T.W. Clyne and W. Kurz: Metall. Trans. A, 1981, vol. 12A, pp. 965–71.10.1007/BF02643477 ↗
24. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans. Tech. Publications, Aedermannsdorf, Switzerland and Germany, 1989, p. 290.
25. M. El-Bealy and B.G. Thomas: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 689–93.10.1007/BF02915668 ↗
26. E. Scheil: Z. Metallkd., 1942, vol. 34, pp. 70–72.
27. A. Ghosh: Sadhana, 2001, vol. 26, pp. 5–24.10.1007/BF02728476 ↗
28. G. Krauss: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 781–92.10.1007/s11663-003-0084-z ↗
29. S.K. Choudhary and A. Ghosh: ISIJ Int., 2009, vol. 49, pp. 1819–27.10.2355/isijinternational.49.1819 ↗
30. H.D. Brody and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 615–24.
31. Y.M. Won and B.G. Thomas: Metall. Mater. Trans A, 2001, vol. 32A, pp. 1755–67.10.1007/s11661-001-0152-4 ↗
32. J. Kunze, C. Mickel, M. Leonhardt, and S. Oswald: Mater. Tech. Steel Res., 1997, vol. 68, pp. 403–08.10.1002/srin.199700574 ↗
33. E. Scheil: Arch. Eisenhüttenwes, 1935, vol. 12, pp. 565–67.10.1002/srin.193500186 ↗
34. S. Okaguchi and T. Hashimoto: ISIJ Int., 1992, vol. 32, pp. 283–90.10.2355/isijinternational.32.283 ↗
35. B. Dutta, E.J. Palmiere, and C.M. Sellars: Acta Mater., 2001, vol. 49, pp. 785–94.10.1016/S1359-6454(00)00389-X ↗
36. P. Maugis and M. Goune: Acta Mater., 2005, vol. 53, pp. 3359–67.10.1016/j.actamat.2005.03.036 ↗
37. Z. Ma and D. Janke: ISIJ Int., 1998, vol. 38, pp. 46–52.10.2355/isijinternational.38.46 ↗
38. Y. Kawashita and H. Suito: ISIJ Int., 1995, vol. 35, no. 12, pp. 1468–76.10.2355/isijinternational.35.1468 ↗
39. J. Kunze, C. Mickel, G. Backmann, B. Beyer, M. Reibold, and C. Klinkenberg: Steel Res., 1997, vol. 68, pp. 441–49.10.1002/srin.199700580 ↗
40. P. Rocabois, J. Lehmann, H. Gaye, and M. Wintz: J. Cryst Growth, 1999, vols. 198–199, pp. 838–43.10.1016/S0022-0248(98)01139-7 ↗
41. J.W. Christian: The Theory of Transformations in Metals and Alloys, 2nd ed., Pergamon Press, New York, NY, 1975, pp. 432–48.
42. J.D. Robson: Mater. Sci. Tech., 2004, vol. 20, pp. 441–48.10.1179/026708304225016725 ↗
43. M. Perez, M. Dumont, and D. Acevedo-Reyes: Acta Mater., 2008, vol. 56, pp. 2119–32.10.1016/j.actamat.2007.12.050 ↗
44. M. Perez: Scripta Mater., 2005, vol. 52, pp. 709–12.10.1016/j.scriptamat.2004.12.026 ↗